kva 10 used for sale

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

extinguishing water tank, storage tank, earth tank, irrigation tank, sports field irrigation, cistern, rain collection container with 100,000 litres capacity for the storage of service water / extinguishing water. Dimensions: D = 2.90 m - L = approx. 16.00 m The container has a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is provided with a bitumen coating / bitumen insulation on the outside. Slight insulating damage due to removal and transport may be present on the container. Price from Söhrewald - freely charged - For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 dome shaft made of glass-fibre reinforced plastic - GRP, complete with walk-in Steel plate cover - diameter = approx. 1.00 m, height = approx. 0.85m, - 1 pc. suction l ...

Amonyak refrigeration plant,from a meat processing plant. The plant is made of 3stk. Compressor Sabroe, Compressor 1. SABROE Type: SMC104L-HP,276m3/h,1465rpm,R717,Y.O.M.1996. Electric motor SCHORCH Type: KN7225M-BB01F-Z,55kW. Compressor 2and3. SABROE Type: CMO28,190m3/h,1460rpm,R717,Y.M.1996. MOTOR SCHORCH Type: KN7200M-BB01F-Z,37kW. The plant is in a very good condition,see pictures. Several pictures and info on request.

Type: VK 1056, Y.O.M. 2006. Single-deck rod sizer with integrated feed channel, rod carrier and rod rake made of stainless steel, screen frame rubberized 60 shore, 2 unbalance motors 2.8 kW / 960 UPM, open screen box on compression springs, brake control, steel base. Current cutting at 8 mm; machine was only in use for 12 months, therefore in very good condition.

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Remaining stocks from Siemens S5 product row 250 E/A maps p. 5 15 analogous maps 25 versch CPU 25 stream care and more singles or parcel price

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de

Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

Cheap LAGERCONTAINER 10 feet (3m) ideal as a material/storage container from location DE-83395 Freilassing Delivery at extra cost ! DESCRIPTION / SPECIFICATION Factory-new storage containers in robust and stable design. Welded steel frame made of wood and rolled profiles with corner fittings, stackable. The floor construction consists of steel beams with welded cross beams and a covering made of 28 mm thick, water-resistant glued plywood. The walls were made of a profile plate with a thickness of 1.5 mm and are welded to the frame construction. The roof skin consists of a 2.0 mm thick profile plate. Container doors are equipped with a double lip seal and rotary rod closures. Each container has anti-theft protection and forklift bags. TECHNICAL DATA / TECHNICAL DATA Dimensions outside: length x width x height: approx. 2,991 x 2,438 x 2,591mm Dimensions inside: length x wid ...

for 200, 250 and 330 ml

All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de

The container is factory-new, enstpricht the German Institute for Standardization 6616, owns 2 saddle feet is emptied inside and cleaned and undercoated outside, incl. rise leaders. D = 2.90 m - L = approx. 16.00 m. the container receives a factory-new Kunststoffinninhuelle - continuously to the storage of liquid fertilizer incl. leaky warning device mounts in the protective box. the plastic inside cover owns a Allgemeine appraisial Zulassung Z-65.30-466 and is therefore for the storage of liquid fertilizer AHL as well as reducing agent NOx from 32 (AdBlue) suitably and admitted. the price gets on ex works - freely charged.

Filter cloths for chamber filter press 800x800, 1000x1000, 1200x1200 and other formats from overproduction

used chamber filter records 1000 x 1000 PP approx. 190 pieces in the camp

Anew ex works! Hydraulics - membrane pump Abel HMD-G-80-1000 long construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

used membrane filter records, membrane chamber filter records 1000 x 1000 pp approx. 190 pieces in the camp

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Used appr. 100 m³ / 100,000 litres steel tank, single-walled, top condition, aboveground storage tank, on 2 bases, water tank, firefighting tank, water cistern. volume: 100 m³ / 100,000 litres material: steel tank dimensions: appr. Ø 3.0 m x 16 m long weight: appr. 15.0 t painted white outside, pure steel inside The container is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. The container / steel tank can be used as storage tank for many different media. Upon request we can coat the inside with a food-suitable paint or rework the tank into a firefighting tank or otherwise to suit your demands, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has alrea ...

used hydraulics - membrane pump Abel HMD-G-80-1000 compact construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

The laser device series NBL, consistently adaptable to your needs, allows you this economic and durable engraving of single pieces and small series, directly from the computer. Ideally suited for medical instruments, devices and transplants. No consumables. In a special process you can even mark glass - instant - durable. So, you can mark on your products easy and flexible variable data, for example a 2D barcode, or QR code in the highest quality. Also plastics are possible, like E.g. an attractive customer card, with photo or graphics, in brilliant quality. Laser marking is resistant to abrasion, penetrates deep into the material and thereby effectively resists tampering attempts and adverse effects due to environmental influences, to a large extent. Only a standard PC (not included) is required for the Operation where the software supplied is running to operate the laser.  ...

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

Used membrane chamber filter press / filter press Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 15 times !

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

Working length: 1020 mm Maximum sheet thickness: 2.5 mm Maximum opening width: 48 mm Bending angle: 0-135 ° Width: 1350 mm Overall width: 820 mm Height: 1140 mm Approximate weight: 285 kg FEATURES -Universal bending machine for sheet metal working and repairers -Sturdy construction in modern design -Easy adjustment of the upper beam by means of foot pedal, hands are free for the workpiece - manual bending machine for standard bending tasks -Segmented clamping beam for a large number of bending possibilities -Optimum price-performance ratio -Faster and easier bending operation via handle -Non-slip rubber coating on the foot pedal for safe working -Easy adjustment of the lower beam on the corresponding thickness -High upper beam for the manufacture of highly bent profiles Action price, including free home delivery to 1 address Germany (Mainland)

Used membrane chamber filter press / filter press Rittershaus & Blecher /1000x1000 ( Mix Package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 8 times !

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Rittershaus & Blecher / Membrane Filter Press Chamber Filter Press 1000x1000 Detailed Description Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a good condition and 8 machines like this availabe.

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Used eccentric screw pump Bornemann E2H 1024 Built: 1993 Power: 4 kW Voltage: 400/690 V Flow rate: 10 m3/h Speed: 370 rpm Viscosity: 10000CST Conveyor pressure: 2 bar Suction flange: DN80, top Pressure flange: DN65, axial Manual: yes Machine number: 329495

For Amos press 1600 3 Steück new mesh belts type 5060 22600 Mm Width 1600 mm Chain and closure polyester unit price 2250,-

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle drive ensures  ...

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg

; ready for operation

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

Water distillation plant for water for injection according to the pharmacopoeia. Power up to 2,200 l / h

; ready for operation

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000