kva 10 used for sale

Belt sander: This machine can also be mounted without a base. Therefore, it is suitable as a table belt sanding machine. Belt width 100 mm Strap length 1220 mm Belt speed 1140 m/min. Package size max. 0.62 x 0.4 x 0.35 cm Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions L x W x H 0.97 x 0.67 x 0.37 m Condition: never used / new (5) Auction-ID: A7-46642-23

Operating pressure max. 1890 bar, ratio 1:440 Weight incl. packaging approx. 350kg Original price approx. 50.000€ Auction-ID: A1-46686-11

2 pieces MSSE32L90-3225N/ 8 pieces MSSE32L00-3325N/ unused and in original packaging Auction-ID: A1-46698-172

Sheet metal gripper Load capacity 1000Kg Sheet thickness 1 - 15mm Weight 8.0Kg Dimensions 350 x 200 x 100mm Condition: never used / new (5) Auction-ID: A7-46642-193

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0.025 t Condition: never used / new (5) Auction-ID: A7-46642-191

• Model: Speedlock CF HD (Heavy Duty) • Material: High-quality carbon (carbon fiber) – extremely torsion-resistant and lightweight • Connection: 100mm half shell (suitable for all common professional fluid heads) • Special feature: Thanks to the Speedlock system, both pull-outs can be adjusted in a flash with just one lever per leg • Condition: Used and in very good condition. Technically flawless. The clamps hold bombproof. Includes ground spreader for maximum stability Auction-ID: A7-46327-14

Lifting magnets 2 pcs. Lifting capacity 100 kg Magnetic area 70 x 60 mm Weight 7 Kg Dimensions L x W x H 100 x 120 x 120 mm Condition: never used / new (5) Auction-ID: A7-46642-42

Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension? ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm

offered without plates. Plates maximum: 100 Plate formats: 600x600 Platefilter features: Electric-Hydraulic press dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm

filter Plates maximum: 100 Plate formats: 400x400 Platefilter features: Electric-Hydraulic press dimension ca. 300x60x110 cm Distance between first plate and spindle approx ca. 160cm

Austattung: Schwimmereinlaufventil NW32VT F?llstandsanzeige 16mm Auslauf NW32VT Number available (price per tank): 1 configuration: top door, standing tank section 1 [ltr]: 100 capacity liter: 100

Machine number: 219278 Operating voltage: 380 V Spindle passage: approx. 22 mm Spindle speed: 270-3000 rpm Centre length: approx. 350 mm Centre height above bed: 110 mm Turning diameter over bed: 220 mm Centre height over support: 70 mm Turning diameter over support: approx. 140 mm The machine is equipped with a tailstock, a Multifix turning steel holder and a quick-release chuck including post collets and other suitable accessories Reference: Ulmer - Lot 16 Auction-ID: A7-46763-354

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-17

62.5 running metres, 8/6/8 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

Set of plastic storage inserts for CNC tool holders, mounted in a metal rack. Designed for HSK tool holders Auction-ID: A7-46756-248

Work trousers from government stocks – unworn orange Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-49

Fire Brigade SCBA Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-87

with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame Auction-ID: A7-46287-174

Item number: 5572100120 incl. pallet, pack size approx. 600x800x600 mm Auction-ID: A1-46785-3108

Operating voltage: 230-240 V Frequency: 50/60 Hz Connection: 620 W Speed: up to 6000 rpm Reference: Common - Lot 43 Dimensions: 300mmx200mmx100mm Weight: approx. 20kg Auction-ID: A7-46763-157

ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-207

Machine: SCM SIGMA IMPACT 105 C Flat Saw Year: 2003 Useful cutting length: 4500 mm Useful cutting depth: 4500 mm Blade overhang: 105 mm Press: grooved Trolley speed: 30 m/min Pusher: 9 pneumatic clamps Tables: 3x 1500x600 mm in bakelite Ø main plank: 380 mm Main blade motor: 10 hp Ø scoring blade: 160 mm Incisor motor: 2 hp Weight: 4400 kg Consumption: 55 A Suction: 2x Ø120 mm + 1x Ø150 mm Power supply: CE, 380 V Auction-ID: A1-46801-9

Power supply: 400V; Power: 19 kW; Capacity: 10 trays; Water pressure: 1.5-4 bar; Electronic control with programs The convection oven is a professional, high-capacity appliance designed for restaurants, hotels, canteens, catering companies and large culinary shops. Its main purpose is to simultaneously, quickly and evenly cook large quantities of food by combining hot air (convection) and steam. Transport defect - the door does not close Auction-ID: A7-46794-14

Bundeswehr Tropics T-Shirt Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-18

BW Original Bundeswehr Flashlight Bag Spotted Camouflage as good as new Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-33

Serial number: 042-024/51 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220/60V Connection: 17 kW Nominal current: 80 A Nominal force: 1000 kN Operating pressure Speed: 200 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between table and plunger: 800 mm Table dimensions: 900 x 560 mm Auction-ID: A7-46287-125

Item number: 5200661109 incl. pallet, pack size approx. 1600x800x500 mm Auction-ID: A1-46785-3121

Machine number: 24141278 largest stroke: 250 mm Max. compressive force: 1000 kN Drive power: 15 kW Operating voltage: 380 V Table dimensions: 645 x 695 mm Auction-ID: A7-46287-20

Machine number: 204-10-2 Bending length: approx. 1020 mm Sheet thickness: 2 mm Auction-ID: A7-46287-147

Manufacturing number: 4514-02 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Nominal current: 20 A Connection: 13 kVA Heating power: 12 kW Usable space: 0.563 cbm³ Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Air exchange: 4.5 cbm³/min Auction-ID: A7-46287-49

Serial number: 2961-05 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Connection: 13 kVA Heating power: 12 kW Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Auction-ID: A7-46287-48

Part Number: 6166002100-PGN incl. pallet, pack size approx. 1200x800x360 mm Auction-ID: A1-46785-3149

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-16

Machine number: 822441 Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 600 mm Control model: HEIDENHAIN TNC 410 PA Spindle speed (max.): 6,000 rpm Drive power: 13 kW Spindle holder: BT 40 Number of tool positions in tool changer: 22 Rapid traverse X and Y axis: 40 m/min Rapid traverse Z-axis: 30 m/min Work table Length: 1,150 mm,Width: 490 mm EQUIPMENT Note: The machine vices mounted on the work table as well as the tool holders installed in the tool magazine and in the spindle, including the tool, are not included in the sales and scope of delivery. The oil mist extraction, which may be seen in the photos, is not included in the sales and scope of delivery. Reference: Zabyx - Lot 52 Auction-ID: A7-46763-340

62.5 running metres, 8/6/8 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

Machine number: A0045A0007 Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Travel X-axis: 2015 mm Travel Y-axis: 1215 mm Max. material thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching force: 165 kN max. hold-down force: 10 kN Max. stroke sequences punching Hole spacing 1 mm: 600 rpm Signing: 1300 rpm Max. axis speed X-axis: 80 m/min Y-axis: 55 m/min simultaneous: 97 m/min max. acceleration X-axis: 10 m/qs Y-axis: 5 m/qs C-axis punching/thread forming: 175/min Number of positions in the linear magazine: 17 Number of tools/claws: 15/2 Number of tools when using multi-tool/claws: 15-150/2 Number of claws location/2: max. 2/3 Reject parts: max. part size via disc chute: standard 180 x 150 mm max. part size via disc chute with movable support table: 460 x 500 mm Accuracy position deviation: +- 0.1 mm Average position spreading width: +- 0.03 mm in ...

Original Bundeswehr Combat Backpack 65L Flecktarn Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-23

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-27

Auction-ID: A3-43529-5118

Work trousers from government stocks – unworn yellow Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-51

Order number: 121789A Press force: 100 kN Stroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mm Ram adjustment: 80 mm Table dimensions: 1000 x 720 mm with three grooves Auction-ID: A7-46287-132

75 running metres, 6/5/6 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

2 year warranty (both for business and private buyers) given by the seller himself! so no anonymous import — seller is effectively available after sales for service and follow-up - Delivery possible at home and abroad; price to be discussed - Additional accessories and attachments available separately (e.g. additional buckets, auger, hammer, grapple,...) - New compact crawler excavator 1 ton class, direct from recent production (12/2025, unused and fully operational. This machine combines a compact construction with professional equipment, diesel power and precise hydraulic control. Ideal for earthworks, landscaping, renovations, trenches, driveways and utilities. Thanks to its limited width, it is very suitable for working in hard-to-reach places - ✅ KOOP192 diesel engine (industrial version) ✅ Compact size – ± 93 cm machine width ✅ Professional hydraulic joystick control � ...

62.5 running metres, 8/6/8 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

HAMER UNI-1000 automatic thermoforming, filling and sealing machine, designed for single-dose packaging (liquid products such as oil, cosmetics, etc.). Key features: Pressure and vacuum thermoforming Contact heating system Heat sealing station 3-head dosing system Die-cutting and cross-cutting system Scrap ejection system Integrated marking system Touch Screen Control (Delta HMI – GP-477R) Technical data: Brand: HAMER Model No.: UNI-1000 Serial number: A-10535 Suitable for the production of single-dose containers in the food, cosmetic or pharmaceutical sectors. Compatible with food-grade materials such as PVC/EVOH/PE films. Approximate dimensions: Length: 4,000 mm Width: 1,500 mm Height: 2,000 mm Approximate weight: 2,000 kg Installed in a clean production environment. Possibility of on-site inspection. Auction-ID: A7-46053-5

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-18

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-46647-243

75 running metres, 6/5/6 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

Milling Cuter from widax heinlein 10pcs Auction-ID: A7-46756-256

Manufacturer: HARTFORD Year: 1999 Type: CNC Vertical Machining Center Numerical Control: FANUC O-M Axes: 3 Axes (X, Y, Z) Strokes: X 1000 mm / Y 500 mm / Z 550 mm Spindle: BT40 – 8000 rpm Equipment: Chip Conveyor, Full Documentation (Operator's Manual, Electrical Diagrams, FANUC Documentation) Condition: Machine in working order, loaded on truck (LOADED) Condition: used Auction-ID: A1-46647-229