kva 10 ese used for sale

The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: plenty of dirt passage, pumps thick liquids with solid particles, high yield versus exceptionally low engine power, sucks in very quickly and up to a large suction height (8.5 meters) clogging-free, wear-resistant screw centrifugal impeller, can slop and can run dry, Machine can be used as:, the pumped sludge, keeping sewers and cellars dry, wherever suction and slobbering really needs to be done emergency pump unit for fire brigade, water boards and, Water purifications, pumping surface water, keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h, Max dirt pa ...

: neu : 2025 : 080093 : prompt, Zwischenverkauf v : Türkei : 5530 € : 106.73 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2100 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 7280 : prompt, Zwischenverkauf v : Türkei : 15700 € : 1 : 100 to : fix : 1020 mm : 300 mm : 1020 mm : 680 mm : 9 mm/s : 5 mm/s : 10 mm/s : 6 mm : 500x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2275 mm : 2082 kg demo machine / mint condition net price (price for new machine € 19.550,00) 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel AND FOOT PEDAL Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11400 € : 218.88 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 26500 € : 506.15 € : 100 to : horizontal verschiebbar : 500 mm : 700 mm : 1050 mm : 25 mm/s : 2 mm/s : 1900 mm : 1200 mm : 2450 mm : 1770 kg HORIZONTAL MOVABLE CYLINDER 600 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 428.36 € : 100 mm : 32 mm : 135 mm : 13 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 24400 € : 1 : 30 to : 1250+N x 1000 mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2780 mm : 1900 mm : 4000 x 2300 x 1900 mm + Z mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/ ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7400 € : 142.82 € : 100 to : fix : 300 mm : 1070 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2200 mm : 1500 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7300 € : 140.89 € : 60 to : horizontal verschiebbar : 250 mm : 1040 mm : 180x120 mm : 4 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 800 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 € : 160.19 € : 1 : 100 to : horizontal verschiebbar : 300 mm : 1070 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2430 mm : 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10000 € : 193 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used and untested 17018898 Auction-ID: A7-46481-38

Give and unexamined; 19034771 Auction-ID: A7-46481-128

23041496 Auction-ID: A7-46481-1021

23046508 Auction-ID: A7-46481-1041

Auction-ID: A7-46458-243

21070580 Note: Item is defective! Auction-ID: A7-46481-1031

17020133 Auction-ID: A7-46481-1061

Used and untested 20028782 Auction-ID: A7-46481-94

21032287 Auction-ID: A7-46481-1081

18011812 Auction-ID: A7-46481-1011

21032286 Auction-ID: A7-46481-1071

17012066 Auction-ID: A7-46481-1001

Used and untested; 21026884 Auction-ID: A7-46481-138

Used and untested; 19001410 Auction-ID: A7-46481-18

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 380 V 100 Hz -Power: 18 KVA -Dimensions: 1160/480/H540 mm -Weight: 290 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 3.5 kW -Output: 105/140V 291/391Hz -Power: 3.4 kVA -for edgebanders, edgebanding machines -Weight: 120 kg

Generator EME DRS 200/10-8 year: 2005 115 V 52,2 A 107 Hz Shaft diameter: Ø 40 / 45 mm New !' Dimensions: 730 x 460 x 470 mm

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet ,Transformer -Type: IST 474/16/OJ -Power: 0.100 kVA -Voltage: 380V / 42V -Technical data: see photo type plate -Dimensions: 150/100/H100 mm -Weight: 2.2 kg

Total height container 390 cm! Equipped with: 4000 liter fuel diesel tank (empty)( 3450x1250x2000 mm) Including: 20ft container. Auction-ID: A1-43429-70

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46415-91

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46415-5

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46416-5

Condition: ( NEW ) Year of construction: 2026 Engine Cummins Model: 4BTA3.9-G13 Nominal power: 110 KvA/ 88 KW Continuous power: 100 KvA/ 80 KW Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 U/min. Included: Maintenance kit High-quality galvanized steel acoustic hood Water preheater Diesel tank, approx. L234 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller DEEPSEA: Model: DSE6120 U.K Protection functions: • Low oil pressure • High water temperature High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Starting error • Rain cover Socket package consisting of: - 1 x 32A - 1 x 63 A - 1 x 125 A Auction-ID: A1-46826-3

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46416-91

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

MARINE GENERATOR SET Mitsubishi STAMFORD ALTERNATOR 295 KVA / 1500 RPM

used, good condition from plant disassembly 1x ELTRA DSG10.0 three-phase transformer - Year of construction: 09/10 Power: 10 kVA at 100% ED Prime: 3x 200 V - 210 V - 240 V / 3x 29.5A Sec.: 3x 400 V / 3x 14,4 A 50/60 Hz Isol.Kl.: ta40°C/B Circuit: Dyn5 Cooling: AN Space requirement LxWxH: 670 x 490 x 660 mm (mobile with rollers) Price is plus VAT free loading Warehouse Gießen - shipping possible by arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sales reserved The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.

KEB Inverter EMC Filters 180A, 0.528V UL. 480V 150A Ambient 3K3, Mat. No. 23E4T60-1001 Line H1R1A14 International shipping on request!

Brand: MATELEC Model: 3 phase ONAN Transformer Power rating: 1000kVA Voltage: 15 - 20kV / 410V Additional info: Dyn 11, 50Hz Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.

Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg

Transformer, converter, inverter, three-phase autotransformer -Input: 200-600 V -Output: 115-230 V -Technical data: see photos -Number: 9 transformers available -Price: per piece -Dimensions: 150/175/H160 mm -Weight: 16 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 2.4 kW -Output: 165/110V 294/194Hz -Power: 3/2 kVA -for: edgebanders, edgebanding machines -Dimensions: 680/360/H290 mm -Weight: 78 kg