kva 10 ese used for sale

This LISSMAC SBM-M 1000 B2 deburring machine was manufactured in 2012. It features an automatic material throughput with an aperture width of 1000 mm and can handle sheet thicknesses up to 20 mm. The machine is equipped with a powerful brushing motor and offers an infinitely variable feed adjustment. Weighing 2000 kg, its designed for robust and precise deburring operations. If you are looking to get high-quality deburring capabilities consider the LISSMAC SBM-M 1000 B2 machine we have for sale. Contact us for more information.

This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information.

pressure: 100 t throat: 250 mm stroke: 400 mm dayligth: 500 mm table surface area: 800 x 500 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: 500 mm ram surface: 800 x 500 mm working feed: 10 mm/sec speed down: 110 mm/sek speed up: 160 mm/sek power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions: 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solut ...

This 4-axis MONTAVAR HBG 105 CNC was manufactured in 2009. It features X-axis travel of 2000 mm, Y-axis travel of 1250 mm, Z-axis travel of 1000 mm, W-axis stroke of 600 mm, and B-axis rotation of 360 degrees. Equipped with Heidenhain TNC 530 controls and a maximum RPM of 1200. If you are looking to get high-quality milling capabilities consider the MONTAVAR HBG 105 CNC machine we have for sale. Contact us for more information.

2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003

This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine.

General SKU201U005 MakeBecomix TypeM1 RW 1000S No.011-6-1185 Year of construction2007 Mounted on legscheck Pressure Working pressure2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume1442 Ltr. Motor23 KW Specified Features - Processing vessel MaterialStainless steel 1.4404, Stainless steel 1.4541 (321), Stainless steel 1.4581 (348) Closed stirring vesselcheck Capacity1442 Ltr. Vessel sizesdia. 1250x1200 mm Dished bottomcheck Dished top sidecheck Manholedia. 500 mm Top connectionsdia. 80 mm Outletdia. 35 mm (2x) Max. temperature20/134 °C With gate type stirrercheck With paddle stirrercheck Motor11 kW 380-420/660-725 Volt Speed mixing shaftStirrer: 47 rpm: Homogeniser: 2945 rpm With homogenisercheck Motor23 kW 400 Volt Information LocationBarneveld With switchcheck With switchgear(as is) Floorspace2x1,4 m Total height2,9 m Weight15 ...

This IMA Novimat Systems I/R75/1000 edgebander was manufactured in 2005. It features a robust ICOS OPEN control system, a jointing milling unit with powerful motors, and a versatile multi-functional processing unit for detailed edge finishing. The machine includes a 32-position edge magazine and an advanced gluing unit with an automatic PU melting system. Consider the opportunity to buy this IMA Novimat Systems I/R75/1000 edgebander. Contact us for more information about this machine.

This edge processing line was manufactured in 1996. It features a robust double-sided edge processing line, including a gluing unit with granulate pre-melter and a 6-position roll magazine for edging material. Equipped with both flush and fine milling capabilities, it also includes a profile scraper and a buffing unit. Ideal for longitudinal and transverse processing, the IMA COMBIMA offers comprehensive functionality for advanced woodworking tasks. For more information about this woodworking machine, please reach out to us.

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€.

General SKU212T481 MakeOchsner TypeCNY 100-340 Mach.No.49065 Main Features MaterialStainless steel Volume32000 Ltr. Motor12.5 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity32 m³/h With motorcheck 11/12,5 kW 380-420/440-480 Volt (ABB: type: MBT 160M) InletDN100 OutletDN65 Information Mounted on framecheck LocationBarneveld Floorspace1,5x0,65 m Total height0,6 m Weight600 kgCentrifugal PumpsOchsnerPumps > Centrifugal PumpsBrand > Ochsner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine.

A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame.  ...

This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.

General SKU412X1247 MakeCF Scheer & CIE LocationBarneveld TypeSGS 100-E Main Features Motor3 KW Width950 mm Specified Features - Pelletiser Pelletisercheck Rotor width100 mm Rotor diameter80 mm, 200 mm Number of rotor knives1 With roll feedingcheck Motor3 kW 220—240 380—420 V 1420 rpm Rotor speed0—1430 rpm Information No.21058787/8 Year of construction1992 Floorspace1,2 x 1 m Total height1,5 m Weight340 kgPelletisersScheer & CieMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine.

General SKU335X744 MakeMöstl Anlagenbau GmbH LocationBarneveld CEcheck Type1010 l. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1010 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity1010 Ltr. Vessel sizesø 1000 x 1379 mm Dished bottomcheck Dished top sidecheck Manholecheck DN500 Top connectionscheck Outletcheck DN50 (with valve) With jacketcheck (75 Ltr.) Max. temperature0 / 150 °C With propellor stirrercheck Motor0,25 kW, 230/400V, 1400 rpm Speed mixing shaft435 rpm Information No.1729 Year of construction2018 Mounted on legscheck Floorspace1,20 x 1,20 m Total height2,40 m Weight900 kg Extra Specifications Electrochemical polishing, surface r ...

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine.

This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine.

Key data: 253 mm, 1000 mm

CNC Lathe, Model: SL - 253 BMC / 1000

This 6-axis FANUC ARC Mate 100iC welding robot was manufactured in 2011. Ideal for precision welding tasks, it offers robust construction and reliable performance. If you are looking to get high-quality welding capabilities, consider the FANUC ARC Mate 100iC machine we have for sale. Contact us for more information.

cone distance min./max.: 0-108 mm Pitch angle min/max: 5°/84° Control: GE Fanuc Series 0-GC Pitch diameter (1:1 ratio): 152 mm pitch diameter (10:1 ratio): 216 mm Diametral pitch (finest/coarsest): 1.3/8.5 Mod. Face width gear wheel max.: 35 mm Knife spindle - Speed range: 41-121 U/min working spindle speed range: 0-33.33 U/min weight: 9025 kg dimensions of the machine ca.: 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.

fire: SCM Technology, model: CM 1000 Mobile, Year of construction: 2001, Length: 9990 mm, Width: 2550 mm, box: 6600 mm, Engine: Diesel engine, Cutting: 900 x 800 mm, General conditions: working, Cutting force: 1000 tons, Weight of machine: 39 t.

This 6-axis NAKAMURA WT-100 was manufactured in 2019 and features dual spindles with a speed of 6,000 rpm and a motor power of 11/7.5 kW each. It boasts a bar capacity of Ø42 mm and a maximum turning diameter of Ø190 mm. The machine includes a dodecagonal drum turret with 24 indexing positions and rapid traverse rates up to 40 m/min. If you are looking to get high-quality turning capabilities, consider the NAKAMURA WT-100 machine we have for sale. Contact us for more information.

This 3-axis DECKEL MAHO DC 100V was manufactured in 1995. It features a Siemens 840D control, a machine table of 1250 x 800mm, and travels of 970 x 755 x 490mm in X, Y, Z axes. With a maximum speed of 18,000 rpm and 24 tool positions, this vertical machining centre is still in production. Consider the opportunity to buy this DECKEL MAHO DC 100V vertical machining centre. Contact us for more information.

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

This 3-axis MIKRON VCE 1000 Pro-X was manufactured in 2007. A vertical machining centre featuring a Heidenhain CNC control and a 24-tool changer, ideal for diverse and complex machining tasks. A robust choice for precision engineering. Contact us for further details regarding this vertical machining centre.

A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible.

This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine.

table length: 1000 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 300 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis Vimercati PHSI 100x3050 press brake was manufactured in 2005. It features a working width of 3050 mm, motor power of 9 kW, and a pressing force of 100 tons. The machine dimensions are 3500 x 2000 x 2700 mm, and it weighs 9700 kg. It includes a fully refurbished Cybelec control system. Consider the opportunity to buy this Vimercati PHSI 100x3050 press brake. Contact us for more information about this machine.

Wood Her STREAMER 1057 FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Spraying Device - PU Machine with all machining tools Machine is WORKSHOP TESTED in TOP CONDITION

This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine.

General SKU229X159 LocationBarneveld CEcheck MakeTatham / Winkworth TypeTFM 1000 Main Features MaterialStainless steel Volume1000 Ltr. Motor15 KW Specified Features - Paddle mixer MaterialStainless steel 1.4301 (304) Paddle mixercheck Double shaftcheck Useful capacity1000 l. Trough sizesLxBxH:1700x1500x1450 mm Inlet1000x1500 mm ManholeInspection hatch, 1100x500 mm Outlet2x 300x1230 mm Motor15 kW, 415 volt, Speed mixing shaft50 rpm Information No.16555 Year of construction2001 Floor space2,15x2,30 m Total height2,10 m Weight2900 kgPaddle mixersTatham / WinkworthMixers > Paddle mixersBrand > Tatham / Winkworth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...

This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine.

Manufacturer: Deckel Maho Model: DMC 100 U duoBLOCK Year of Manufacture: 2011 Find more here - / Contact us at -

This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information.

TURBINE FLOWMETER DN100 Flow L1510404 Brand : IMARI

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.

General SKU397X1132 LocationBarneveld CEcheck MakeDSP Filtertechnik Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface0.75 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,75 m² Capacity700 l. Vessel sizesø 990 x 820 mm Plate sizesø 985 mm Liquid outletDN25 Max. temperature—10 / 150 °C Cake thicknessmax 300 mm Cake capacity250 l MaterialStainless steel 1.4571 (316Ti) Information TypeVN 1000 Mach.No.660 Year of construction2006 Mounted on wheelscheck Floorspace1,25 x 1,25 m Total height1,29 m Weight390 kgNutsche filtersDSPFilters > Nutsche filtersBrand > DSP What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...

Manufacturer: Engel Model: Victory 1050/200 Year of Manufacture: 2006 Machine type: Injection Molding Machine Operating hours: 107027 Closing force: 200 t Screw diameter: 55 mm Max. injection volume: 511 cm3 Fixing plate: 860 x 860 mm Machine weight: 12.9 t Find more here - / Contact us at -

BILLION HERCULE 100 T Reference: H260/100 Condition: Very good Technical Specifications: Clamping force: 100 T / 1000 KN Tie bar spacing: 445 x 445 mm Platen dimensions: 630 x 630 mm Mold thickness (Min/Max): 180- 400 mm Opening stroke: 380 mm Injection volume: 139 cm³ Injection pressure: 1843 bar Screw diameter: 35 mm L/D ratio: 20 Dimensions & Weight: Weight: 5 100 kg

General SKU215X1348 Mounted on framecheck Main Features MaterialStainless steel Volume1000 Ltr. Surface5 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface5 m2 Drying chamber capacity1000 l Drying chamber sizes1050x1050x1000 mm Number of trays11 (24 sample plates) Tray sizes40x480x960 mm (sample plate) Distance between the trays65 mm Tray capacity15 l per sample plate With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace1,5 x1,5 m Total height2,2 m Weight1000 kg Extra Specifications- no machine plateTray dryers-Dryers > Tray dryersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

Transportable 1000L Bulk Container Tank Manufacturer: Bison Stainless Steel, Top Entry Manway. Previously used for spirits This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Key data: 10000 , 11690 , 155

Presse à injecter SANDRETTO MEGA T 17750/1000 Force de fermeture : 1000 T Diamètre vis : 155 mm Volume théorique d'injection: 11690 cm3 Longueur utile de la vis L/D : 20 Capacité d'injection max : 1450 Capacité de plastification : 275 Pression d'injection : 1520 bars Zone de chauffe : 6 Puissance total de chauffage : 105 KW Epaisseur moule min/max : 450mm /1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1900 L Dimensions : 15,1 x 3,15 x 2,81 m Poids total : 87 000 KG

1000L Horizontal Tank Stainless Steel 6 Barrels / 220 Gallons. Horizontal stainless steel vessel, dished ends. Free standing on 4-off stainless steel legs with adjustable feet. 1½” RJT Female Top inlet. 1 x 120mm diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Offer 20147 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg