128,416 used machines on RESALE, but how to find them? Machine Search
Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising ...
Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in to ...
Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2016 Roll division in mm: 65 scope of delivery: including supports and side guides angle: 30° KW: 1,5/S1 Electric data: 380-500 Conveying length in mm (NL): 3715 Frame width in mm (NB): 1050 Bauhöhe in mm (BH): 250 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you wi ...
Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch Features: Construction year: 2016 scope of delivery: including supports and side guides, Lichtschranken, Notausknopf angle: 30° Antrieb: SEW Getriebemotor mit MOVIMOT condition: Ausstellungsstück Belt width in mm (GuB): 1000 Electric data: 380-400 Frame width in mm (NB) ...
Belt conveyor slider 1900-300-1050 Make: Transnorm like new, showroom machine Year 2018 Length:1900 mm Belt width: 300 mm Stand dimensions: 790x480 mm Current conveyor belt height: 1050 mm Adjustable foot height: 100 mm Maximum ejection width: 890 mm Belt conveyor speed: 0,03-1,487m/s Electrical data Completely wired with sensors, direct wiring in the control box Belt conveyor motor data: V300-500, kw 0,75/S1 with frequency converter Ejection motor data: V300-500, kw 0,11-1,1/S1 with frequency converter and Brake Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Belt width in mm: 300 Conveying length in mm: 1900 Antrieb: SEW Getriebemotor mit MOVIMOT Foot plates: 790x480 Conveyor speed m / s: 0,03-1,487 Bauhöhe in mm (BH): 1050 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be ...
TONAZZI TUBE FILLING MACHINE COLIBRI 1001 Year of manufacturing: 2003 Automatic machine for filling and sealing tubes. Used in various industries, like the cosmetic, pharmaceutical, food and chemical. CHARACTERISTICS • Ideal for small to medium and large productions • Intuitive operator interface • Includes devices to protect the operator during operation PRODUCTION • Mechanical speed: up to 100 tubes/min. • Tube Size Range (Ø): 10 ÷ 50 mm • Tube Size Range with cap (H): 50 ÷ 250 mm • Filling Capacity: 3 ÷ 390 ml • Mechanical Speed: up to 100 ENERGY CONSUMPTION • Water Consumption (for plastic or laminate tubes only): 180 l/h • Installed Power for plastic or laminate tubes: 9.2 kW • Installed Power for metal tubes: 6.7 kW • Max. Air Consumption at 5 bar (basic machine): 4000 l/h DIMENSIONS • Size (with stirrer): 2150 x 1260 x 2100 mm; Approx. ...
A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.
For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...
Key data: 2700 KG, 101000 mm, 75000 mm
Jungheinrich Delta – 101 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...
Key data: 3500 KG, 101000 mm, 9850 mm
SSI Schaefer PR600 – 101 m | Height 9.85 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requi ...
Key data: 3500 KG, 101000 mm, 9850 mm
SSI Schaefer PR600 – 101 m | Height 9.85 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requi ...
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Welding Machine Type: Roll Seam Welding Machine Manufacturer: Nimak Type: NMP 7/100 Year of Make: 1971 Machine No. 71059 Rated power: 100 kVA at 50% ED Connected load: 175 kVA Primary voltage: 380V Open circuit voltage: 7.3V Sec. Str. dd/max. 8/33 kA Electrode force: 750 kp Frequency: 50 Hz up to 8.8 V at 6 ATU All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...
Key data: 100 t, 215 mm, 3100 mm
Ref.Nr. 00882 Name of the system: Used press brake Manufacturer: Beyeler Model PR4 1000 KN x 3100mm Year of construction 2000 Machine hours Not visible Power 100 tons Working range 3100mm DNC 80 control system Mains voltage 400V Connected load 5.5kW Machine weight 7000 kg Mains Frequency/Frequez 3~50Hz Max Pre-Fuse 20 AT Max Compressed Air 8Bar Max closing speed mm/s 200mm/s Pressing speed 1-10 Max stroke 215mm Max stop time 110mS Min safety distance 350mm Technical condition Fully functional
Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible.
2012 KRAUSS MAFFEI 850-1400-1000 MX Z Injection moldin machine missing electrical and mechanical parts Find more here - / Contact us at -
Height=1.06 m, Overall length= 0.85 m, Overall width= 0.9 m, Net weight= 150 kg,
Height=1.48 m, Overall length= 1.33 m, Overall width= 0.67 m, Net weight= 355 kg,
Height=1.2 m, Overall length= 0.95 m, Overall width= 0.8 m, Net weight= 190 kg,
Height=1.75 m, Overall length= 0.95 m, Overall width= 0.85 m, Net weight= 150 kg,
Height=1.15 m, Overall length= 0.5 m, Overall width= 0.4 m, Net weight= 180 kg,
Height=1.35 m, Overall length= 1.55 m, Overall width= 3 m, Net weight= 685 kg,
Height=1.16 m, Overall length= 1 m, Overall width= 1.23 m, Net weight= 212 kg,
Height=0.825 m, Overall length= 0.64 m, Overall width= 0.6 m, Net weight= 57 kg,
Height=2 m, Overall length= 0.95 m, Overall width= 1.4 m, Net weight= 270 kg,
Height=1.51 m, Overall length= 0.742 m, Overall width= 1.268 m, Net weight= 212 kg,
Height=1.1 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 134 kg,
Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,
Height=1.235 m, Overall length= 1.003 m, Overall width= 0.856 m, Net weight= 90 kg,
Height=1.67 m, Overall length= 0.95 m, Overall width= 1.66 m, Net weight= 240 kg,
Height=1.06 m, Overall length= 1.02 m, Overall width= 0.8 m, Net weight= 165 kg,
Height=1.48 m, Overall length= 1.33 m, Overall width= 0.67 m, Net weight= 355 kg,
Height=1.85 m, Overall length= 1.08 m, Overall width= 2.05 m, Net weight= 1500 kg,
Hot melt / melter for packaging industry for sealing cartons ProBlue 4 1022230A Serial Number: SA06C26938
max. wheel diameter: 1250 mm gear width: 430 mm max. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 ° Stößelhublänge: 25 - 450 mm stroke position adjustment: 310 mm Doppelhubzahl - stufenlos: 70 - 190 U/min grinding wheel diam. min/max.: 290 - 400 mm table diameter: 1000 mm table load: 4000 kp dimensions of the machine ca.: 7,7 x 4,5 x 3,3 m total power requirement: 30 kW weight of the machine ca.: 28 t - Complete covering - Oil mist extraction - Coolant system - counter Holder - change Gears - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.36 m, Overall length= 1.65 m, Overall width= 3 m, Net weight= 300 kg,
Manufacturer: Peak Model: Precision Hydrogen 200cc 100–230V Year of Manufacture: 2020 Type of Machine : Hydrogen generator Specifications: - Voltage: ~100/230V - Frequency: 50/60 Hz - Current: 6 Amps - Maximum Output Pressure: 100 PSI Find more here - / Contact us at -
sheet width: 1050 mm plate thickness: 2.0 mm roll length: 1070 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 325 kg range L-W-H: 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...
turning length: 1000 mm turning diameter: 420 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 250 mm spindle taper: DIN 55029 D 1-6 taper in tailstock: 4 MK quill travel: 140 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1220 kg range L-W-H: 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Sh ...
capacity 90 degrees: round: 100 mm capacity 45 degrees: round: 65,0 mm capacity 90 degrees: flat: 100 x 150 mm capacity 45 degrees: flat: 60 x 100 mm dimensions of saw-band: 1470 x 13,0 x 0,65 mm volt: 230 V : 45,0 m/min weight: 26,0 kg range L-W-H: 700 x 320 x 420 mm scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80.0 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 5.5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on t ...
weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: max. 1000 kg turning speeds: 0,18 - 0,58 U/min height: 976 - 1436 mm inclination: 0 - 115 ° table diameter: 895 mm voltage: 380 V total power requirement: 2,0 kW weight: 685 kg range L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjust ...
weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad Total weight, approx.: 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) ...
working area L-W-H: 1000 x 900 x 900 mm range L-W-H: 1300 x 1750 x 2200 mm weight: 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material such as B. corundum, steel sand, glass grain, glass beads, ceramic beads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...
turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...
turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake ...
pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 9.5 mm/sec return speed: 155 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 6850 kg range L-W-H: 3750 x 1950 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.8 ...
maximum number of results exceeded
please refine your search
