kva 10 ese used for sale

Engine Brand: SWEDIC, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 10.5 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 13.5 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/swedic-sw-11500-generator-10kv a-new/322, , = More information =, , Year of construction: 1010, Empty weight: 205 kg, Type number: SW-11500 GENERATOR 10KVA

Engine Brand: LOVOL, Condition: NEW, Engine Cooling Type: Exchanger (on engine) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 110 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/lovol-1006twgm12-new/744, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1006TWGM12; Transport weight [kg]: 715

Engine Brand: LOVOL, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 135 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/lovol-1006-p6tadp2a43-new/ 743, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1006-P6TADP2A43; Transport weight [kg]: 715

Engine Brand: LOVOL, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 75 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/lovol-1004-4tz09-new/145, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1004-4TZ09; Transport weight [kg]: 510

Pad printing system ( 5 x MSC 100 in-line design ), a linear system with upstream parts supply (automatic mint card feeder) Drying tunnel Stacking device

turning diameter: 1020 mm turning length: 4000 mm turning diameter over slide: 720 mm Holder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: U/min turning speeds: U/min bed width: 560 mm spindle bore: 200 mm workpiece weight: kg faceplate: 1000 mm make: Forkhardt PSA 1000 3 jaw chuck Forckrath: 500 mm steady: 263 mm steady: 500 mm total power requirement: KVA weight of the machine ca.: t dimensions of the machine ca.: 7,4x2,5x2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough Machine Kneader Werner & Pfleiderer WP DK 100 double conical mixer Tank car extendable with timer Flour dust cover Connection 400V, 16A-CEE plug Machine We carry a wide range of dough machines!

Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...

Sourdough - Fast - Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 - 100 kg total rye flour for approx. 60 kg sourdough with timer Stainless steel version, mobile Agitator removable at the bottom Connection 400V, 1.5 kW, 16A-CEE plug Dimensions: 640 x 700 x 1250 mm Used machine cleaned 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning You will find a large selection of bakery equipment with us!

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

10X Genomics GCG-SR-1 The Chromium Controller is in very good condition Find more here - / Contact us at -

Screw diameter 30 mm Foundation plan / installation plan (see machine layout above in the appendix), an extra foundation for the plant was not poured here Operating hours 12455h on 28.01.2021 Automatic cycle counter 743558 processed material PBT-GF 30 Ultradur B4300 G6 Q16 black Find more here - /

The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...

2004 Wagner WDSP II 10000 Press Find more here - / Contact us at -

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

Air classifier - Integra HWS-1000 KL (unused) This item is as new, as it was never in use. For sale: - Air classifier POWER HWS-1000 KL - Hook lift - system DIN 30722 - Conveyor belt special construction, foldable with stock winch - AA: 2750 mm, GB: 650 mm, steep conveyor belt with 30 mm V-profile incl. magnetic drum and VA chute - Power generator 100 KVA, Stage 3, 280 liter tank Condition: NEW The wind sifter was not in operation. Only the power generator has a running time of 2.566 hours The 2020 Integra HWS-1000 KL is an industrial air classifier machine primarily used for sorting and separating materials based on air flow dynamics. It is often employed in recycling processes or material handling where specific separation is required. The machine features a hook lift system compliant with DIN 30722 standards and includes a specially designed conveyor belt with a steep angle ...

Matrix 105 systems system one stripper Matrix 105 plasma Asher Plasma descum semiconductor equipment Applications Photoresist Stripping Matrix System One The Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment represents the Industry Standard in single-wafer photoresist removal and the mainstay of the highly successful System One family. Developed in cooperation with many of the world’s leading IC producers, the Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment has been designed for optimum performance and Cost of Ownership. Find more here - / Contact us at -

The Spühl FPC 100 (or a similar model, the FPC 105) machine is designed for producing pocket springs, commonly used in mattresses. Here are its key specifications: - Spring Type and Dimensions: It can handle both barrel and cylindrical type springs. The outer waist diameter of springs ranges from 40 to 75 mm, with a spring height after setting of 100 to 270 mm. The pocket height can be between 70 to 230 mm. - Spring Wire Gauge: The machine is compatible with a spring wire gauge of 1.3 to 2.2 mm. - Performance and Consumption: The machine can produce up to 100 springs per minute, depending on spring dimensions. It consumes approximately 6.5 m³ of air per hour at 6 bar, with a total power consumption of around 13 kVA. - Power Requirements: The machine operates on a voltage of 3 x 400 V or 3 x 220 V, with an input fuse of 100 A. Other voltages can be accommodated on request. It is compat ...

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Missing electrical and mechanical parts. Find more here - / Contact us at -

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

Manufacturer: Merz Model Type/Number: MP-2 / 109-1 Year of Manufacture: 2002 Year of Modification: July 2008 Electrical Connection: 400V, 3.5 kW, 50 Hz Heating Voltage: 230V AC Control Voltage: 230V AC / 24V DC Compressed Air Requirement: 6 bar / L-min The Merz MP-2 is a type of rotary tablet press machine, used in the pharmaceutical and nutraceutical industries to produce tablets. Merz, a manufacturer known for creating industrial machinery, developed this type of tablet press to efficiently compress powders into tablets. Key features of the Merz MP-2 include: - Rotary Operation: It operates in a rotary fashion, meaning it has multiple stations or dies that rotate, allowing for a continuous and efficient process of powder filling, compression, and tablet ejection. - Versatility: The machine can be configured to produce tablets of different shapes and sizes by changing the tool ...

Coil line with 4 tonne coiler incl. coil turner HS Automation Conveyor system with 4 tonne decoiler incl. coil turner type MS41OL, year of manufacture 2015 Technical data decoiler: Max. Coil weight: 4000 kg Standard strip width: 500 mm Spreading range: 450 - 550 mm Outer ring diameter max: 1900 mm Spreading process Decoiler drive: hydraulic, three-phase motor 400V 50 Hz Decoiling speed: 30 m/min Tape loop control: Pull-off via preset pressure or via loop control Coil stop arms: 6 pieces with quick clamping system Protective device: andes Reel structure and function The reel consists of a solid structure of electro-welded and machined elements. The expanding mandrel can unwind to the left and to the right. Spreading is performed hydraulically via operating elements from the control panel. The reel is equipped with a three-phase motor with which the reel crown can be wound an ...

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - / Contact us at -

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100|50|13 Agraffe: 5 HK Clear width: 2,700 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Rippert HL9-630/1070-Bex Extraction system Type : HL9-630/1070-Bex Position : LG 0 Volume : 27,500 m³/h Pressure Increase : 3,750 Pa Density: 1.2 kg/m³ Power Input : 39.0 kW Temperature max: 40°C Temperature Medium: 40°C Motor Capacity : 45.0 kW Speed : 1,450 1/min (RPM) Max. Speed: 1,450 1/min (RPM) Special Speed: 1,450 1/min (RPM) Capacity: 100,000 m³/h Filter hoses: 462 pcs., 4190x140 mm Ø, PE – needle felt 400 g/m², antistatic, calendered, with test certificate class M, the filter hoses were only completely replaced in 12/2022 Support type: Spiral springs for hanging in tabs of the filter hoses Find more here - / Contact us at -

Drive: . kW Capacity: . kg/h material: . 8 pieces For manipulator A5.1 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

S. No.: 1504369 Cutting length: 800 mm Format: DIN A3 Cutting capacity: 20 sheets (paper weight 70g/m²) Table size: 605 x 800 mm (W x D) Professional lever cutting machine IDEAL 1080 with automatic safety. The IDEAL 1080 can cut formats up to DIN A3 and also DIN A2 crosswise with a cutting length of 800 mm. The maximum cutting capacity is approx. 20 sheets of 70 grams. The stepless back stop can be locked. The sheets of paper are securely fixed before the cutting process using a foot pressure. This creates precise cuts. In addition, a transparent, fixed blade guard made of shatter-proof plastic offers optimal safety. The durable blades are made of high-quality Solingen knife steel and can also be resharpened if necessary. GS tested!

2 UNITS OF 25,000KG/HR PACKAGED BOILER F&A 100 DEG. C [GAS STEAM BOILERS ARE POWERED BY NATURAL GAS TO CONVERT LIQUID TO GAS]

roll diameter: - mm throat: 1000 mm workpiece height: 350 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 x 1 x 2 m No. 4428 Horizontal band saw SAMUR S-1000 V Cutting height 350 mm Cutting speed 20-800 mm Blade length : 4,550 mm. Blade width : 4 to 15 mm. Infinitely variable cutting speed : 23-711 m / min Elektromot r380 V Table dimensions: 610 x 610 mm Table extension left Welding device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used chamber filter press Year of production: 1971 Maximum filtration pressure - 8 bar Maximum filtration temperature - 100 OC Max. Clamping pressure - 280/300 bar Capacity - 1m3 Filtration area - 70 m2 Number of plates - 44 pcs Plate material - Polypropylene (PP) Central feed to the filter press. The set does not include a feed pump. The press has a separate panel for turning the filter press on and off.

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Dematic incline belt conveyor 10300-500-400 RA2347 Conveyor length (FL): 10300 mm (800 mm forward run, 8400 incline segment and 1100 mm arch) Outer width/nominal width (NB): 500 mm Outer width/nominal width with motor: 750 mm Belt width (GB): 400 mm Profile height: 135 mm Climbing belt with curved section Infeed conveyor with overdrive Arched section with 2 adjustable bends Rubberized drive drum Drive: SEW 400 V 0.55 kW Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) Conveying length in mm: 10300 (800 + 8400 + 1100) Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung  ...

RIDUTTORE