kva 10 ese used for sale

Item number: 5200661109 incl. pallet, pack size approx. 1600x800x500 mm Auction-ID: A1-46785-3121

Machine number: 24141278 largest stroke: 250 mm Max. compressive force: 1000 kN Drive power: 15 kW Operating voltage: 380 V Table dimensions: 645 x 695 mm Auction-ID: A7-46287-20

Machine number: 204-10-2 Bending length: approx. 1020 mm Sheet thickness: 2 mm Auction-ID: A7-46287-147

Manufacturing number: 4514-02 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Nominal current: 20 A Connection: 13 kVA Heating power: 12 kW Usable space: 0.563 cbm³ Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Air exchange: 4.5 cbm³/min Auction-ID: A7-46287-49

Serial number: 2961-05 Nominal temperature: 250°C Voltage: 380 V Frequency: 50 Hz Connection: 13 kVA Heating power: 12 kW Steam room: 1.01 cbm³ Permissible solvent quantity: 136 g at 180 °C Auction-ID: A7-46287-48

Part Number: 6166002100-PGN incl. pallet, pack size approx. 1200x800x360 mm Auction-ID: A1-46785-3149

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-16

Original Bundeswehr Combat Backpack 65L Flecktarn Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-23

62.5 running metres, 8/6/8 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

Machine number: 822441 Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 600 mm Control model: HEIDENHAIN TNC 410 PA Spindle speed (max.): 6,000 rpm Drive power: 13 kW Spindle holder: BT 40 Number of tool positions in tool changer: 22 Rapid traverse X and Y axis: 40 m/min Rapid traverse Z-axis: 30 m/min Work table Length: 1,150 mm,Width: 490 mm EQUIPMENT Note: The machine vices mounted on the work table as well as the tool holders installed in the tool magazine and in the spindle, including the tool, are not included in the sales and scope of delivery. The oil mist extraction, which may be seen in the photos, is not included in the sales and scope of delivery. Reference: Zabyx - Lot 52 Auction-ID: A7-46763-340

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-27

Machine number: A0045A0007 Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Travel X-axis: 2015 mm Travel Y-axis: 1215 mm Max. material thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching force: 165 kN max. hold-down force: 10 kN Max. stroke sequences punching Hole spacing 1 mm: 600 rpm Signing: 1300 rpm Max. axis speed X-axis: 80 m/min Y-axis: 55 m/min simultaneous: 97 m/min max. acceleration X-axis: 10 m/qs Y-axis: 5 m/qs C-axis punching/thread forming: 175/min Number of positions in the linear magazine: 17 Number of tools/claws: 15/2 Number of tools when using multi-tool/claws: 15-150/2 Number of claws location/2: max. 2/3 Reject parts: max. part size via disc chute: standard 180 x 150 mm max. part size via disc chute with movable support table: 460 x 500 mm Accuracy position deviation: +- 0.1 mm Average position spreading width: +- 0.03 mm in ...

Auction-ID: A3-43529-5118

75 running metres, 6/5/6 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

2 year warranty (both for business and private buyers) given by the seller himself! so no anonymous import — seller is effectively available after sales for service and follow-up - Delivery possible at home and abroad; price to be discussed - Additional accessories and attachments available separately (e.g. additional buckets, auger, hammer, grapple,...) - New compact crawler excavator 1 ton class, direct from recent production (12/2025, unused and fully operational. This machine combines a compact construction with professional equipment, diesel power and precise hydraulic control. Ideal for earthworks, landscaping, renovations, trenches, driveways and utilities. Thanks to its limited width, it is very suitable for working in hard-to-reach places - ✅ KOOP192 diesel engine (industrial version) ✅ Compact size – ± 93 cm machine width ✅ Professional hydraulic joystick control � ...

62.5 running metres, 8/6/8 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

Work trousers from government stocks – unworn yellow Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-51

Order number: 121789A Press force: 100 kN Stroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mm Ram adjustment: 80 mm Table dimensions: 1000 x 720 mm with three grooves Auction-ID: A7-46287-132

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-18

Milling Cuter from widax heinlein 10pcs Auction-ID: A7-46756-256

Manufacturer: HARTFORD Year: 1999 Type: CNC Vertical Machining Center Numerical Control: FANUC O-M Axes: 3 Axes (X, Y, Z) Strokes: X 1000 mm / Y 500 mm / Z 550 mm Spindle: BT40 – 8000 rpm Equipment: Chip Conveyor, Full Documentation (Operator's Manual, Electrical Diagrams, FANUC Documentation) Condition: Machine in working order, loaded on truck (LOADED) Condition: used Auction-ID: A1-46647-229

HAMER UNI-1000 automatic thermoforming, filling and sealing machine, designed for single-dose packaging (liquid products such as oil, cosmetics, etc.). Key features: Pressure and vacuum thermoforming Contact heating system Heat sealing station 3-head dosing system Die-cutting and cross-cutting system Scrap ejection system Integrated marking system Touch Screen Control (Delta HMI – GP-477R) Technical data: Brand: HAMER Model No.: UNI-1000 Serial number: A-10535 Suitable for the production of single-dose containers in the food, cosmetic or pharmaceutical sectors. Compatible with food-grade materials such as PVC/EVOH/PE films. Approximate dimensions: Length: 4,000 mm Width: 1,500 mm Height: 2,000 mm Approximate weight: 2,000 kg Installed in a clean production environment. Possibility of on-site inspection. Auction-ID: A7-46053-5

75 running metres, 6/5/6 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-46647-243

Doors are still present and will be delivered - engine completely in order, recently serviced - fuel tank leaks (about half tank), brakes only on 1 side - PTO clutch needs to be checked (works for light work) Auction-ID: A3-43529-10966

X / Y / Z axis strokes: 1020 × 510 × 550 mm Spindle power: 11 kW Max. spindle speed: 6,000 rpm Spindle taper: BT 40 Tool magazine: 22 positions Weight (kg): approx. 6000 Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-251

The pictures are to be understood as an example, since the design of the containers has changed over the years, not all containers look the same. This applies in particular to the recess for the sign at the front. (Still the same size). Auction-ID: A7-46755-8

75 running metres, 6/5/6 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

Manufacturer: OMEGA Year: 1990 Type: High-capacity CNC vertical machining center Numerical control: FANUC 15M Axes: 3-axis (X, Y, Z) Strokes: X 1650 mm / Y 850 mm / Z 790 mm Table: 1900 x 850 mm Spindle: BT50 – up to 6000 rpm – gearbox 2 ranges Tool magazine: 30 positions Weight: approx. 15000 kg Notes: Heavy duty CNC vertical machining center, suitable for intensive machining and large parts. Auction-ID: A1-46647-227

Post Bundeswehr Service Shoes Lattice box/pallets not part of the auction. Auction-ID: A1-46806-40

Jaw width: 160 mm Reference: Osthoff - Lot 72 Weight: approx. 30kg Auction-ID: A7-46763-365

POE Phone Alcatel 4068 IP Touch Lattice box/pallets not part of the auction. Auction-ID: A1-46806-45

\"The Schaublin 102 VM mechanical lathe is a high-precision machine tool designed for machining operations, especially the turning of metal parts. Manufactured by the Swiss brand Schaublin, known for the quality and reliability of its equipment, this model is particularly popular in precision mechanics workshops, laboratories and demanding production environments. Offered as is, it is an excellent opportunity for professionals wishing to acquire a robust machine to be put back into service or optimized. With dimensions of 200 cm in length, 77 cm in width and 155 cm in height, this lathe offers a comfortable workspace while remaining suitable for a standard workshop. Its weight of 400 kg guarantees high stability, which is essential to ensure optimal machining quality and limit vibrations. The Schaublin 102 VM is therefore a reliable and high-performance solution for turning jobs that req ...

Serial number: 223084 max. sheet width: approx. 1000 mm with mechanical hand lever operation Auction-ID: A7-46287-193

Serial number: 9B810117, incl. measuring head, type: XM C 1000, camera: 4 megapixels, CMOS image receiver, wavelength in the center of the light recording near infrared measuring range: 300 x 250 x 150 mm Smallest display unit: distance 1μ, angle: 0.0001° Measurement accuracy Repeatability measuring table locked: +- 3μ Measuring deviation measuring table locked: +- 8μ Max. weight load: 25 kg Number of probes: 1 incl. hand-held probe Reference: Schmidt - Lot 88 Auction-ID: A7-46763-88

POE Phone Alcatel 4068 IP Touch Lattice box/pallets not part of the auction. Auction-ID: A1-46806-12

Type: Pellet mill Status: New Mobility: Machine on wheels Power supply: Electric Auction-ID: A1-45887-137

Manufacturer: FAMUP Year: 1998 Type: CNC vertical machining center Numerical control: Heidenhain 410 AC.Strokes : X 1000 mm / Y 470 to 600 mm / Z 470 to 600 mm (according to documentation) Table: 1300 x 520 mm – T-slots 5 x 18 mm (pitch 100 mm) – max. load 800 kg Spindle: ISO 40 DIN 69871 – AC Brushless – 50 to 8000 rpm – 11 kW (30 min) / 7.5 kW S1 Feeds: X/Y/Z 10000 mm/min – X/Y/Z 30000 mm/min fast tool magazine: 24 positions – max. tool diameter 94 mm – max. length 280 mm – max. weight 6 kg – changeover time 3 s Equipment: without spindle center coolant, without chip conveyor, sold without tools Dimensions: 4247 x 3105 x 3310 mm Weight: 6000 kg Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-221

Original Bundeswehr Combat Backpack 65L Flecktarn Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-41

Fire Brigade SCBA Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-88

Mixed lot of JUMO industrial automation and temperature/process control equipment including approx. 11x diraTRON 104 controllers, , 2x ITRON 04 display/controllers, 1xcTRON 04, 1xdTRON 308 and 1x LOGOSCREEN 500 cf paperless recorder. Auction-ID: A7-46756-497

Serial number: 07400003691 operating hours read: 88,040 Spindle hours read: 43,558 Spindle speed range: 3200/5000 rpm Rotation diameter: 270 mm Turning diameter: 120 mm Spindle distance: 900 mm Travel X1: 290 mm Travel Z1: 650 mm Travel X2: 180 mm Travel Z2: 650 mm Travel Y1: +- 40 mm Travel Z3: 670 mm Travel X3: 175 mm Max. rod diameter: 100/104 mm Spindle bore diameter: 118 mm Rapid traverse speed X- and Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of driven tools per tool carrier: 12 Control: SIEMENS SINUMERIK 840 D POWERLINE incl. chip conveyor with 2 tool turrets - each with 12 tool positions main and counter spindles, as well as foot switches Attention, the machine has the following defects: -the B-axis is defective (sits on turret 1) -the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crooked in the range of 0.03 mm (would have  ...

10 rolls each 35 meters in PP and 1.1 mm thickness in anthracite. Auction-ID: A1-46759-20

Work trousers from government stocks – unworn orange Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-50

Model: 5370662354 Application: These axles are often installed in commercial vehicles, construction machinery (such as wheel loaders) or agricultural vehicles incl. transport frame Auction-ID: A1-46785-3214

Post Bundeswehr Service Shoes Lattice box/pallets not part of the auction. Auction-ID: A1-46806-28

CNC Vertical Machining Center Order: Heidenhain TNC 426 Axes: 3 Table (mm): 1100 × 600 X/Y/Z strokes (mm): 1000 × 600 × 800 Spindle: ISO 40, max. 8,000 rpm Tool magazine: 40 positions Equipment: Chip conveyor Serial number: Notes: Used machine, Auction-ID: A1-46647-260

Work trousers from government stocks – unworn blue Means of transport such as lattice boxes and pallets are not part of the auction. Auction-ID: A1-46806-46

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 100 , Control panel: Stainless steel Control box, Controls, Thermomet ...

Auction-ID: A7-46690-38