kuplex t used for sale

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

Mettler Toledo RE40D Digital Refractometer RE digital refractometers are ideal for measuring the refractive index, Brix, and concentration of aqueous solutions, such as glycerol, propylene glycol, and acetone. They determine the refractive index by a method based on total reflection, which allows for accurate measurement even for cloudy or dark samples. These refractometers are equipped with built-in and compact Peltier thermostats for temperature control; No water bath is required. They require small sample volumes (0.2 mL) and are easily calibrated with water or certified standard solutions. Measurement range nD: 1.32-1.70 Brix measuring range: 0-100% Accuracy nD: 0.0001 Brix accuracy: 0.1% Temperature range: 15°C to 70°C (59°F to 158°F) Typical measurement time: 15 seconds Power supply: 110-240 V, 50/60 Hz With RS-P42 printer Equipment tested

Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports Construction year: 2018 angle: 45° KW: 1,5/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Conveying length in mm (NL): 1500 Frame width in mm (NB): 1250 Belt width in mm (GuB): 1000 Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Movi-Mot For individual ...

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW

power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3200 mm, 750 mm, 695 mm

Basic machine data Used 5-axis machining center from HEDELIUS Make: HEDELIUS Type: Tiltenta 7 Magnum Year of Make: 2016 Condition: very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Travel: x-axis: 3200 mm // y-axis: 750 mm // z-axis: 695 mm Technical data: • Spindle: 50-12,000 rpm • SK40 interface • Fixed machining table with integrated NC rotary table • Ø table: 750 mm • Max. workpiece weight: 800 kg • B-axis infinitely variable: + 98°/- 98° • 50-fold tool changer • Max. tool length: 330 mm • Feed speeds: up to 40 m/min • IKZ (internal coolant supply) • 500 L tank with paper belt filter • Chip conveyor Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

: 1200 mm : 580 mm : 600 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm)  ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm)  ...

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...

Laminator - paper over board Make Tùnkers Model S-1100 Year 2002 Workingwidth 1100 mm Substrate Feeder automatic suction feeder Details with pressing roll & pressing belt, spot label, vacuum belt, pressing belt Delivery delivery on a table OPTIONS we can deliver the machine with spot label functionn OR with lamination station, OR both, and even with a second glue station for triplle layer Condition can be purchaased `as-is`or refurbished on most parts (ask details) Available Direct or very soon

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...

MWM TCG 2020 V12 Natural Gas Generating Set. Capacity: 1,235 kW Fuel: Natural Gas Year: 2011 Hours: 29,000 Voltage: 400 V Frequency: 50 Hz Scope of supply: Engine, Alternator (Marelli), Engine Panel, Control Panel, Gasline, Heat Exchanger. Photos are for illustration purposes only. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in mm (N ...

Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2022 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 950 Belt width in mm: 800 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including side guid ...

Transnorm angled-belt conveyor 45° 1400-1050-800 RA2304 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 45 Length center: 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/external width (NB): 1050 mm Conveying speed: 0.717 mm/s V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports angle: 45° KW: 1,5/S1 condition: Ausstellungsstück Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Füße, Movi-Mot Electric data: 380-400 Frame width in mm (NB): 1050 Conveying length in mm (NL): 1400 Belt width in mm (GuB): 800 Construction year: 2022 For individual,  ...

TECHNE MCS-102L 2-Position Magnetic Laboratory Shaker New equipment in its original packaging Reference : MCS-102L This magnetic stirrer is designed for optimal suspension cell culture and the use of micro-carriers. The MCS-102L accommodates 2 x 1 liter culture flasks Speed range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel stirrer platform with culture flask markings Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotary Display: Analog Applications: of biological samples Rotational speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

Milk Homogenizer Capacity 20.000 lt/h Motor: 90 kW 2 stages Hydroulic control

grinding diameter: 630 mm grinding length: 4000 mm centre height: 335 mm total power requirement: 28 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRUMPF TruPrint 3000 3D Printers GENERAL Project No.: 905844 Quantity: 1 pcs. Manufacturer: TRUMPF Type: TruPrint 3000 Year of Make: 2016 Condition: Used machine Approx (hrs): 3571 DESCRIPTION LASER Laser power Preheating substrate plate 200 degrees Diameter buildable area 300 mm Overall height 400 mm 2 pcs. removable construction and storage cylinders Adjustable layer thickness 20-150/1000 mm GENERAL TECHNICAL DATA Mains fuse 32 A Machine dimensions (LxWxH) approx. 3385 x 1750 x 2070 mm Machine weight approx. 4300 kg NOTE Suitable for stainless steels, tool steels, aluminum, nickel-based or titanium alloys We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non- ...

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

saw blade diameter: 20-200 / 30-300 mm workpiece-spindlehead motor: 0,3 kW grinding wheel diameter: - mm total power requirement: 4 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 4 x 2,5 x 1,5 m No. 1532 Workbench system with 7 saw blade grinding machines and integrated grinding dust extraction system Working width: 20-200 / 30-300 mm Drive power: 0.25/0.3 kW Workbench with base cabinets and various tools Integrated dust extraction for each workstation in the workbench Weight approx. 1100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric Lifter, Capacity: 1500 KG

Mast: VFHM 435-0A7, Integral Sideshift, 1000mm Forks, Black Solid Tyres, LPG, Power: 25 KW, Own Weight: 2780 KG, Capacity: 1750 KG

1997 Folding machine T 500-4/4 first unit pile feeder 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany

Key data: 800 KW

Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale

CURSAL TRSI8000 OL700 series parting line consisting of: - automatic loader with 1 column and 3 vacuum suction cups - 6-chain horizontal feeder with singularizer for miter saw - TRSI8000 OL700 cross-cut saw with integrated pusher and length optimizer - CNC sorting discharge belt with 2 ejectors - 2 inclined ways each with 4 idle rollers for side discharge Total overall dimensions about 14 x 5 meters Year 2018, CE regulations, compatibility with industry 4.0 Visible, installed and in operation until August 2025. Delivery availability from September 2025.

2005 folding machine first unit pile feeder F510 Counter 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany

Key data: 120 l/min, 12 W, 7

Text

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

2005 folding machine first unit pile feeder F510 Counter 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany