kuplex t used for sale

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8 pieces, Polyethylene semi-tubular film, residual stock, Width 550 mm Thickness: 30 microns Barrel length per roll:700 meters needled suitable for shrinking No guarantee is assumed for the technical data given in the description.

SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 -Volt. 380/50 - S/N 2401011 - CE rules

pressure: 100 t table length: 2000 mm table width: 1580 mm stroke: mm pressing speed: mm/sec voltage: 400 V return capacity: t max. table loading capacity: 10.000 / 20.000 kg total power requirement: 18 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm max.load upper table no swiveling 10t / swiveling 6t max.load lower table 22t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 identical diesel gensets available MWM TD602V16 AvK generator with 700 kVA Operating hours approx. 1200 per unit Incl.: Radiator Silencer Cabinets Technical documentation Disassembled and immediately available Subject to prior sale - errors possible Internal reference number: E-1159

WEBER COOLING BASE TWO Vacuum cooling system Cooling capacity: 2 IP or 2 EUR Products to be cooled: leafy vegetables/fruits up to 1000 kg Cooling temperature: from 20-30 degrees C to 3-5 degrees C Control: PLC Unitronics V1040, Weber 2022 software Vacuum pump: 1 x Busch RA R5 0305D ( 300 m3 / h ) Chiller: Aermec ANL 202 Compressor: Metabo Basic 250-24W OF

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 0 to 100 mm -Load capacity: 1250 kg -Number: 4x sheet metal clamps available -Price: per piece -Dimensions: 300/310/H80 mm -Weight: 13 kg

Metal detector Safeline V4-wheel Mettler Toledo - Model: V4-RAD - Metal detection - Voltage voltage: 100.240 Vac - Frequency: 50 /60 Hz - Power: 340 W (Max.)

Hauser compound system with 3 Bitzer compressors and switch box 2x 4NES-12.2Y, 1x 4NES-14 F3Y (with frequency converter)

Compound system TEKO TPX2-4EES-4Y with Bitzer compressor 2 pcs. 4EES-4Y and switch box Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

stick electrodes 3.2 x 350 -Type: Phoenix SH Yellow B -Price: per package -Quantity: 2 packages available -Weight per package: 4.4 kg

Stack electrode 4.0 x 350 -Type: 330.1 SH Purple R -Weight: 4.8 kg

Marel/Stork/Townsend twin spiral hot air/steam oven 600 mm belt Machine in lovely condition direct from major UK factory which stopped producing for fast food chain in 2016.

Stick electrodes 3.2 x 350 -Type: Thyssen Ce I 70 -1 package: 650 pieces -Weight: 17.9 kg

Stick electrodes 4.0 x 350 -Type: Phoenix SH Green TB -Weight: 4.7 kg

Pad printing machine Pad printing is an indirect printing process based on the gravure printing principle. It is particularly suitable for printing on plastic and metal objects and can also be used when the printing area is uneven. The eponymous silicone tampon transfers the color to the print area Little-used machine with accessories

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection

working area: . mm material: . capacity: . Stück/h weight: 250 kg Machine number: 05.0501.01Nominal vacuum 0.5 h PAThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 2 pieces Transnorm inschleuser / inclined belt conveyor - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 6200-00 Nominal briete / belt width: 800mm SEW Motor Condition: good Available: as of now Location: Frankenberg Sachsen warehouse These are the two lower parts on the pallet – unfortunately there are currently no better photos.

Tetra Pak TCAP/21 1000 ml ReCap 3 applicator We offer: Tetra Pak TCAP/21 ReCap 3 applicator for 1000 ml Tetra Pak beverage cartons, Year of construction 2004 - in very good condition - optimally maintained Subject to prior sale

Tetra Pak conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 meters with engines, straight pieces and curves Subject to prior sale

Tetra Pak TCAP/21 1000 ml ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml Tetra Pak beverage cartons, manufacturing year 2004 - in very good condition - excellent serviced Available from stock Prior sales reserved

We constantly overhaul Martin T90, T90 profile and Martin T92 If you have any questions, please call us or email us. We speak Dutch, German, English and French. Brand: MARTIN Type: T90 Year of construction: 1991 M-No.: V188134 Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 12 - 260 mm Planer thickness: 8 - 160 mm Roll forming depth: Vertical spindle max. 12 mm Horizontal spindle max. 8.5 mm Thickness adjustment: NC and electrical adjustment Width adjustment: NC and electrical adjustment (optional: automatic pendulum axle control) Head measurement: 100 programs memory Spindles: Bottom: Tersa Z-4, ø125 mm, 5.5 KW Right & Left: Tersa Z-4, ø125 mm, 7.5 KW Top: Tersa Z-4 ø125 mm, 5.5 KW Speed: 6,000 rpm Feed: 4 – 25 m/min infinitely variable Min. product length: 380 mm Central control ...

We offer used: Tetra Pak PT 10 Pull Tab Applicator was in operation with a Tetra Pak TBA 8 1500 ml slim line filling machine Year of construction 1997 In very good condition Subject to prior sale

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

Brand: Martin Type: T54 Year of construction: New Motor power: 5.5 kW Knife shaft speed: 5,000 tpm Knife shaft: Z-4 Tersa, ø125 mm Planer width: 5000 mm Spahn removal: max.8 mm Table length: 2.850 mm Task - Table length: 1.640 mm Removal - table length: 1.200 mm Table height: 855 mm Dressing stop: Aigner stop, 45°Movable with dunn material planing strip weight: 1.200 KG

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 40 mm -Piston rod: Ø 19 mm -Stroke: 105 mm - Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 390/90/H55 mm -Weight: 2.7 kg

air flow quantity: 2500 m³/h suction power: . kPa power capacity: 1,1 kW Sweat extractionThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1000 mm depth: 600 mm height: 2150 mm weight: . kg Tool cabinet for Sk50 recordings without roller shutter non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trane chiller mod.GN400E72D2XDDXX1, 102 KW, YOC 2006, refrigerant 407C, with pump and glycol tank below. In very good condition, little operating hour only 2124 hours.

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg

Knife sharpening machine clamping length 820mm V 380 kW 0.75

Stop magnet, pull magnet, opening magnet, stop magnet, locking unit -Manufacturer: Thomas/Sauer gear -Type: 82-5650-106700 -for: Sauer gear -Type: WE10J402F1E0D220 -Connection: 220 volts -Stroke: 12 mm -Number: 1x available -Price: per piece -Dimensions: 115/210/H145 mm -Weight: 7 kg

Folding machine Make MBO Model T49-4 Year 1984 Maximum size 490 x 850 mm Configuration Feeder Flatpile feeder 1st station 4 plate buckles 490 mm Delivery belt delivery Details with batch counter, noise hoods, vacuum pump Available direct

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Stick electrodes 4.0 x 350 -Type: Phoenix Green S -Price: per package -Number: 1 packages available -Weight per package: 4.7 kg

Stick electrodes 4.0 x 450 -Type: Phoenix 120K -Price: per package -Number: 9 packages available -Weight per package: 5.9 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from: a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg

Stick electrodes 4.0 x 450 -Type: Thyssen 600 Violet W -Price: per package -Number: 14 packages available -Weight per package: 6.2 kg

Device type extraction system Make TEKA Type filtoo IFA-tested incl. BGIA Certificate Supply voltage 1 x 230 volts separation efficiency > 99 % for steel and stainless steel, high-alloy steels, W3 approval fan volume flow 2,500 m³/h Motor power 1.1 kW Version mobile workshop device with extraction arm, 3 meters long in hose design Dimensions L x W x H 580 x 580 x 900 mm Noise level approx. 68 dB(A) Weight 80 kg Age 12 months Condition like new Warranty 24 months from date of delivery Total price 1.325,00 € + VAT from stock Munich incl. Spark protection STAVO ______________________________________________________________________ ______________ Coarse filter, 1 piece 10,70 € + VAT 10 pieces 79,00 € + VAT Pre-filter 1 piece 80,00 € + VAT Activated carbon filter 1 piece 71,00 € + VAT Main filter 1 piece 2 ...

Stick electrodes 4.0 x 450 -Type: SH Green K 50 W -Price: per package -Number: 6 packages available -Weight per package: 6.2 kg

Stick electrodes 4.0 x 350 -Type: Phoenix Green T -Price: per package -Number: 4 packages available -Weight per package: 4.6 kg

Stick electrodes 3.2 x 350 -Type: Phoenix K 50 -Price: per package -Number: 6 packages available -Weight per package: 4.5 kg

Automatic machine Bag machine for the production of bags on roll. Capacity 50 bags / minute (depends on the size) Machine width 1200 mm Unwinder width = 1200 mm (tubular film) Core Magazine Folding unit for C folding Floor welding and perforating unit Automatic winder (turnstile) with automatic sleeve feed

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.

Stick electrodes 4.0 x 350 -Type: Hera Blau N -Price: per package -Number: 4 packages available -Weight per package: 4.7 kg