127,247 used machines on RESALE, but how to find them? Machine Search
Tonelli 600 stainless bowls stainless bowls for Tonelli 600 model mixer … 28 in stock
Wire comb locking machine; good condition; suitable for division 3:1; Max. Binding width 457mm (A3+); Max. Staerke 12mm; with 2 large rolls of material in white and silver.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Unit set for paint booth with speed control and heat recovery: Make : Wolf, Type 4/B-M Year of construction 2009 Dimensions : 1.5 m x 4.2 m x 3.0 m (approx. WxLxH) Heating unit : 209 kW Burners : oil burners, Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1,500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Energy saving : Speed control with frequency converter and heat recovery Pipelines : Supply and exhaust air pipes, deflector hood, air intake hood Electrics : Control cabinet Location : Nuremberg Area Retail price : € 11.900,-, net, ex location
Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Paint booth Wolf-Taifuno: Make : Wolf, Type 4/B, Taifuno Year of manuf.: Cabin 2011, Aggregate 2009 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pc recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x40x3 mm Heating unit : 209 kW Energy saving : Speed control with frequency converter and heat recovery Dry temperature : 80 degrees C Oil burners : Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Pipelines : Supply and exhaust air pipes, deflecto ...
Technical data for the pallet rack traverse: Shelving system: Stow Type: Pal Rack OP Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 110 x 50 mm Clear width: 1,300 mm load per pair of trusses 2,000 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.
Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...
TFT replacement monitor for MAHO machines with Philips control CNC 432 2 year warranty!; New
used
all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with batter pump (2 pieces) outfeed belt outside dimensions (l x w x h) : ± 2.600 x 1.300 x 1.700 mm
Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...
Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...
Cat No. 17-00156 in a very good condition Agitator TMR Type: SK 9042AF-132 M/4 TF TMR Turbo Misch Typ: SK 9042AF-132 M/4 TF I = 23.23 / H6 N1/n2 = 53 1/min Motordata: Type: SK 132M/4 50 Hz; 400 / 690 V; 14,8 /8,55 A; 7,5 kW ; 1445 1/min Measurements: Height: 2250 mm Width: 450 mm Length: 950 mm Length of the large wing: 540 mm Length of the smaller wing: 350 mm Weight: 600 kg available: 3 The price is for one unit.
Varnish removal spray booth 3000mmbreit2000mmhoch Suction capacity 10000 m³ air of heating register 10500 m³
This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.
Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm
Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm
Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm
Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm
This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min
Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.
Qty 1 x Guix 75 internal mixer, Chamber volume 75L, Tangential rotors, Hydraulic drop door with linear actuator and latch, Motorised lubrication and process oil system, With 250kw A.C. 1470rpm, 400V motor and controls. Rotor speed approx 60rpm. All mounted on a heavy duty steel base. Complete and in very good condition.
We offer you used warehouse stage. Technical data of offered camp stage of Nedcon: It is possible to run a stock stage in the following composition: Possible column spacing: 4 m x 4 m, 5 m x 5 m. Height 3895 mm incl. gratings Höhne 3845 mm only with Sigma -Load capacity 300kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm -Project prepared according to customer needs. Price for bearing stage only on request available. Please contact us in connection. Price for 1 m² - â?¬70 NET / sqm plus Assembly Prices are net, plus statutory VAT. On request, we can arrange transport throughout Europe. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. It's used goods. Before you ...
New Tetra Pak ® spare parts, -> We send you our list on request
Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...
Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.
Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
DYNAJET 500me HELI - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and sm ...
Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...
Stone slabs / cooker trolley for oven HEUFT VTR or Daub Thermo roll possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung
New venture for special order Requirements as you need all standart with daub/HEUFT 60 x 80 cm or 60x80cm sheets Stainless steel New
DYNAJET 500me/30 basic - 400V/50Hz Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/ ...
DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/tria ...
Perfect for your labeling needs FleXpress incorporates our combined many years of expertise in laser technology: We have further developed proven basic elements and systematically tailored them to the requirements and guidelines of the European market. The result is convincing: With FleXpress you get a reliable, easy-to-use product with a very good price-performance ratio. It is adapted to your individual customer requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. User-oriented through and through Best usability and a high level of service orientation were the focus of FleXpress' development: The machine housing can be put into operation anywhere in your production to save space. Of course, the FleXpress meets the requirements for safe working in laser safety class 1. In addition, you can use the clear laser software ...
Buggies - HEUFT - Daub Thermo roll VTR for baking on stove. possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and Guide material: steel Ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.100mm (1 x 800mm, 1x3900mm & 1x2400mm) Overall width incl. ...
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Year of manufacture: 2007 Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.180 mm overall width incl. motor: 700 mm Info ...
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide (100 mm tall) Year of manufacture: 2009 Ideal for fast material handling Expertly disassembled and packed Condition: fully operational 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 1,920 mm overall width: 800 mm Information on the be ...
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...
DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...
Indramat Module TDM 3.2-030-300W1 Bosch Rexroth
Indramat Module TDM 1.2-100-300-W1 Bosch Rexroth
DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! World's first 1000 bar high-pressure cleaner without control cable and with dry-closing Pistol. The new DYNAJET Trolley 1000 me combines the greatest possible ergonomics and maximum strength for concentrated efficiency. This makes DYNAJETten even more environmentally friendly, more efficient and safer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal ...
TRIOGEN E-BOX ORC for sale. Model: E-BOX ORC Year: 2017 Hours: 0 Capacity: 170 kW Hz: 50 Voltage: 400 V Scope of supply: Complete ORC E-Box. The E-Box is primarily an E-Box 170kWe Power, but can be also an E-Box 170 CHP (Vario). General Information: E-Box 170 Power – this is when the working fluid condensing (cooling) temperature is at 55degC, this is specific to recovering hot gas at around 500degC (engine exhaust for example). To achieve full power (170kWe gross), the cooling water needs to operate at 55degC, this generating maximum power of 170kWe refer to graph given at cooling temp of 55degC = 170kWe. Price: £240,000 . Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.
DYNAJET 800me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/trian ...
DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...
Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
YNAJET 500me - 400V/50Hz Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth u ...
maximum number of results exceeded
please refine your search
