kuplex t used for sale

Plummer block housings, plummer block housings, plummer block bearing blocks, plummer block housing units, plummer block housing units, vertical plain bearings, plummer block bearings, tension bearing units, tension head -Manufacturer: PTI, Tension bearing unit type T205 -Balance: HC205-GE25KRRB -Bore diameter: 25 mm -Number: 31x clamping bearing units available -Price: per piece -Dimensions: 250/130/H35 mm -Weight: 1.8 kg

Multi-slot broach, broaching tool, broach needle, special tool, slotting tool, slotting machine, slotting machine, slotting tool -Number: 2 tools available Price: complete set of 2 pieces -1x Tool: Ø 16 0.056 -1x Tool: Ø 15.75 x 16Ø S8 -Weight: 2 kg

Multi-purpose winch, cable winch, lifting winch, assembly winch, rope winch, universal rope winch -Condition: without steel cable -Manufacturer: Greifzug -2x multi-way trains -Cable winch with: 3200 kg load capacity -Robust aluminum case -with: telescopic hand lift poles -Pulling pulleys: 2 -Price: complete -Weight including accessories: 135 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat, sensor -Manufacturer: Trafag, thermostat temperature switch, unused, original packaging -Type: 471 2331 342 14 -Temperature range: 20 to 150 °C -Quantity: 25 thermostats available -Price: per piece -Package dimensions: 80/115/H180 mm -Weight: 1.1 kg/pc.

General SKU426X1426 LocationBarneveld CEcheck MakeAllgaier Main Features MaterialStainless steel Surface2.3 m2 Sizes diameter1720 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,3 m² Number of sieve decks:3 Sieve sizesø 1720 mm With covercheck Inletø 300 mm Outletø 200 mm Drive vibro motorcheck Motor3,0 kW, 400/690 V, 1415 rpm, (Ex) Sieve perforation10 mm, 5 mm, 3 mm With ball cleaningcheck With extra sieve decks8 mm, 3 mm, 1 mm Tumbler screening machines MaterialStainless steel 1.4305 (303), Stainless steel 1.4571 (316Ti) Information Serial5795 TypeTSI 172 Year of construction2004 Year of construction2004 Mounted on mild steel framecheck With switchcheck Floor space2,10 x 2,00 m Total height1,80 mTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is ...

General SKU397X1126 LocationBarneveld Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume2090 Ltr. Surface18 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface16,2 m² (18 m²) Drying chamber capacity2090 l. Drying chamber sizes1718 x 1130 x 1305 mm Max. temperature100 °C With jacketcheck Max. temperature100 °C Number of trays9 (10) Tray sizes1650 x 980 x 23 mm Distance between the trays96,6 mm Max. temperature100 °C With 1 doorcheck ConnectionsDN125 Without vacuum pumpcheck MaterialStainless steel 1.4571 (316Ti) Information MakeHenkhaus / Klein Machine number2513 Year of construction1981 Floorspace1,8 x 1,93 m Total height2,7 m Weight4500 kg Extra SpecificationsPressure inside pipes 2,5 bar, volume 284 ...

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

General SKU900WP118 MakeBehälter KG No.26191 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Volume1070 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity1070 l Vessel sizesø 1100 x 1350 mm Dished topcheck With covercheck (400 mm) Flat bottomcheck OutletDN50 With jacketcheck MaterialStainless steel 1.4301 (304) Information Floorspace1,2 x 1,2 m Total height1, 75 m Weight270 kg Extra Specifications1.070 l portable, tank, 304 stainless steel,new 2000 Technical specs Extra information- water aansluitingVertical tanksBehälter KGTanks > Vertical tanksBrand > Behälter KG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...

CONTROLS   CNC controls TRAUB TX8I-S BASIC FUNCTIONS   number of spindles: 2   number of c-axes: 2 WORKING RANGE TURNING   turning diameter (max): 20 mm   bar diameter (max): 20 mm MAIN SPINDLE   spindle revolutions (max): 10000 /min   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 10000 /min   c-axis: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (TURNING)   chip conveyor: yes   through spindle coolant attachment: yes   hydraulic system: yes   European CE standards: yes - Interchangeable operation: Can be used as a short- or long-turning lathe Equipment: Number of axes: 12 (15) - Main spindle C - Sub-spindle D20 with X/Z/C axes - Upper tool gantry with X/Y/Z/H/B axes and 8 tool ho ...

Thermo Quick Duo temperature control unit with 2 removable bowls Control by thermostat Connection: 230 V Used device cleaned

General SKU900WP093 MakeHaake TypeUWK 90, Type 003-3978 Mach.No.003-3978 LocationBarneveld Extra Specifications231 V, 50 Hz, IP20, CE certifiedTemperature control unitsThermo HaakeHeat exchangers > Temperature control unitsBrand > Thermo Haake What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Welding manipulator Type: P82 14VF Hydraulic lifting and tilting Electric turning MANIPULATOR: yes Capacity: 9,5 ton

For sale is a powerful 3-phase mains transformer from ALSTOM (type TC1743G). The device was reliably in use until the end. Power: 20,000 kVA (20 MVA) Voltage: 110,000 V to 20,000 V Includes high-quality MR tap-changer Total weight: approx. 40.8 tons Curb weight: approx. 29,300 The transformer can be overhauled and repainted by arrangement. If required, the complete accessories incl. 110KV circuit breaker are available. We can help with loading and transport Request to submit a bid only if you are seriously interested

We sell an older but fully functional and complete TRIBO powder coating system consisting of - Through-baking furnace INDAPP approx. 8m x 4m, oil firing. - District conveyor with infinitely variable drive - 2 automatic cabins with 2 spray guns each - 1 hand cabin (self-built) - Hand sprayer TRIBO96C from INTEC - Suitable cyclones for powder recovery - Vibrators for powder screening - Extraction, powder filter The entire system is more than 40 years old, but fully functional and still in use. The TRIBO system works without high voltage, the charge is generated by rubbing the powder in the plastic tube of the spray gun. We have been using the system for about 40 years to paint housing parts made of sheet steel, which works very well and also economically fast. Please note: Sale from location. The system must be completely dismantled by the buyer. To do this, look at t ...

TwenTower – Drawer shelf for trays up to 3m x 1.50m, storemaster – used - : Price ex site: 17.500.-€ (net), incl. loading Manufacturer: storemaster Type / System: TwenTower SL 19 Year of manufacture: 2018 Heavy-duty drawer storage system for the storage of wood-free large-format sheet metal packages For sheet metal formats up to: 3,000 x 1,500 mm (drawer usable area) for the purpose of removing individual sheets by hand, by means of a vacuum crossbeam or magnet, 19 drawers with a usable height of 50 mm Max. load per drawer: 1,750 kg (gl.f.L.) Excerpt >100 % Top gripping height approx. 2,100 mm Max. load per head level: 3.0 t (gl.f.L.) Max. load per shelf block: 50,000kg (gl.v.L.) System height 2,380 mm Excerpt on one side Pull-out side walls can be swivelled in Standard loading in packages by means of an indoor crane or forklift load beam, or sheet by tray by ...

Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...

Manufacturer: Elin Type: TDQ-632A01S5K-99 Category: 3-Phase Oil-Filled Power Transformer Year of Manufacture: 2001 Technical Specifications - Rated Power: 630 kVA - Cooling: ONAN (Oil Natural Air Natural) - Type: T (Oil-immersed) - Frequency: 50 Hz - Voltage Ratio: 12 / 1.1 kV - Vector Group: Dyn5 - Rated Voltage V1: 10,920 / 10,500 / 10,080 V (taps) - Rated Voltage V2: 420 V - Rated Current (HV): 34.65 A - Rated Current (LV): 866 A - Short Circuit Voltage: 3.77% - Short Circuit Duration: 2 seconds - Insulation Level: BS75 WS28/WS3 - Total Weight: 2,115 kg - Oil Weight: 0.285 t - Insulating Fluid: Technol US 4000 - PCB Content: less than 1 PPM - Max. Oil Temperature: 84 degrees C - Sound Pressure Level: 29 dB(A) Find more here - / Contact us at -

NEW UNUSED TURBOCHARGER ABB Type TPL77 - B12

Offered is a universal tool grinding machine: Speed: 2800rpm, grinding range: approx. 30-50mm diameter, grinding wheels: cup or dish wheels, weight: approx. 450-500kg, machine dimensions X/Y/Z: approx. 800mm/800mm/1500mm. Inspection possible by appointment.

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

General SKU215X091 MakeOlsa TypeER3 Machine number70037 Year of construction1987 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure trays3 Bar Main Features MaterialStainless steel Volume1000 Ltr. Surface5 m2 Specified Features - Tray dryer MaterialStainless steel 1.4301 (304) Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface5 m2 Drying chamber capacity1000 l Drying chamber sizes1050x1050x1000 mm Max. temperature130 deg C With jacketcheck Max. temperature130 Number of trays11 (24 sample plates) Tray sizes40x480x960 mm (sample plate) Distance between the trays65 mm Tray capacity15 l per sample plate With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck Information Mounted on framecheck LocationBarneveld Floorspace1,5 x 1,5 m Total height2 m Weight1000 kg Extra Specificati ...

Offer 26401 Technical data: - Operation via handheld remote control with cable - Load capacity 4000 kg - Platform size 2500 x 820 mm - min. Lift table height 230 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 40 / 35 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 230 mm - Weight approx. 360 kg

Offer 26109 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg

A medium- to low-voltage distribution transformer France Transfo is available. Power: 800kVA, upper voltage: 10000V, overvoltage: 12kV, impulse voltage: 75kV, winding test: 28kV, connection: D YN05, insulation class: A, rated current: 46.2A/1155A, short-circuit voltage: 6%, cooling type: ONAN, oil weight: 450kg, weight: 2100kg. Documentation available. An on-site inspection is possible.

Type: BT LSV 1600 BT Staxio: 3300 mm heigt Loading capacity: 1600 kg Max arrow height: 3300 mm

General SKU327X692 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity150 l. Vessel sizesø 450 x 1300 mm Dished topcheck Dished bottomcheck Top connectionscheck Outletcheck MaterialBorosilicate Glass 3.3 Information Type150 l No.VZN 150/450 Mounted on legscheck on frame Floorspace0,80 x 0,70 m Weight400 kgVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Titan T250 Specifications Condition New / Never Used Status Disconnected. Preservation inspection was done in the Fall of 2020 and another inspection in 2022. Manufactured Solar Turbines 2017 Driver Solar Turbines Titan 250 Natural Gas Turbine / Version 30002S CS/MD Max HP 30,000 HP Rated RPM 10,500 RPM Control Panel Solar Turbotronic CTLM02

Key data: 630 mm, 250 mm, 5 kW

Thickness planing machine Planing machine Thickener MARTIN TYPE: T41 Planing width approx. 630 mm Passage approx. 250 mm 4 knives planing shaft wedge bar shaft safety knife shaft infinitely adjustable feed speed 8-20 m/min. Articulated pressure beams Rubber feed and rubber pull-out roller Extraction connection: 140 mm Dimensions: 1000 x 1100x 1200mm Soft start control Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are a guideline, depending on the distance and unloading option they may vary. The items can be picked up by yourself or shipped at the expense of the buyer. The item offered is offered with differential taxation. The sales price shown is the g ...

Max. load capacity: 10,000 kg

consisting of: base frame, 2 storage containers, stainless steel, tank container, Fabr. WERIT, osmosis unit, type: SILHORKO, built in 1995, control cabinet system, Fabr. RITTAL, with piping system, filter, pump and valve technology as well as 2 tipper bodies, wheeled

ZEISS TELAVAL 31 Reverse Transmitted Light Microscope Model: TELAVAL31 Binocular Head Adjustable eyepieces: Zeiss GF-P10x 18 Annular diaphragm T31 Ph 6 V / 25 W lamp 220V 3 objectives: Achromat 5x/ 0.12 Infinity/- A, Carl Zeiss Jena, M 25 Achromat Ph 10x /0.25 Infinity/- A, Carl Zeiss Jena, M 25 Phase Contrast Achromat LDN Ph 20x /0.35 Infinity/1.2-A, Carl Zeiss Jena, M 25 Phase Contrast Tested and verified hardware In good condition Power cord

Capacity for the LTM120 is 4600 to 4800 pieces / hour. PIC: SABRINA (0177418071)

CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine

4 x Lathes Traub TND 400

Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg

CE King TB4 Tablet counter Stainless, electronic tablet or capsule counter, two channel, product hopper with top cover and vibration frequency control of product onto the feed chute, mounted on slat chain conveyor 3000mm x 100mm, fills up to 30 containers per min, 3Ph

Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Year of manufacture: 1979 / overhauled: 2024 Circumferential diameter over bed ... 710mm Turning length... 2000mm Max. workpiece weight ... 850kg Circumferential diameter via support ... 420mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW Machine weight ... 3000kg L x W x H ... 4000x1440x1560mm The machine is in very good condition - after the general overhaul. More info on request. Viewing is possible at our warehouse in Brno.

Year of manufacture: 1978 / overhauled: 2024 Circumferential diameter over bed... 710mm Max. workpiece length ... 4000mm Circumferential diameter via support ... 420mm Spindle speed ... 90-1000 rpm L x W x H ... 6000x1440x1560mm Machine weight ... 3500kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

CONTROLS   CNC controls NUM 1060 M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 2   X-axis travel: 3000 mm   Y-axis travel: 2010 mm   Z-axis travel: 2000 mm   rotating range A-axis from: 92.5 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1450 mm   table surface (front-back): 1600 mm FLOOR PLATE   total weight approx.: 12000 kg SPINDLE / HEAD   spindle revolutions (max): 3000 /min   tool fixture: ISO SK 50   drive power: 37 kW AXIS DRIVES   traverse velocity X (max): 25000 mm/min   traverse velocity Y (max): 25000 mm/min   traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENT ...

Bahmüller Turbox BJD 2100, Max. Size: 2100x1200 mm, Min. Size: 380x160 mm, Longitudinal seam bonding, Automatic floor, 4-6 point bonding, Solid board: 800-1500 g/m², Hebklwexni D Eevy Aefn, Corrugated: N,F,E,B,C,A,EE,EB,BC etc.

Stock Laminating machine, Type: 134R5-1500 P, Year 2001, Max.Size: 1420x1620 mm, Min.Size: 500 x 500 mm, Printers sheet:, Paper from about 180 g/m², Carton from about 400 g/m², Carrier sheet:, corrugated cardboard up to about 7.0 mm thickness, Cardboard/Chipboard from 0.6 mm

Table with treadmill Pretzel table Rheon -Table with treadmill on castors -side wood can be folded down (a wooden plate is 30cm deep) -unfolded it is 123cm -Band width: 52cm -Strap length approx., 250cm

Rack Trolley for Daub Thermo Roll 86x85cm - Rack trolley for Thermo Roll oven - Extra deep rack trolley - with 10 pads

Excellent condition - Fully operational - Loading / Transport possible! Motor rating: 5 / 6 kW Rotational speeds: 3/4/5/ 6/ 8/ 10,000 rpm Spindle stroke : 150 mm The machine has the following optional accessories Digital display in the controller of the infeed fence jaw position Motorized fence positioning via the machine's electronic system Motorized table opening for tools with diameters from 70 mm up to 250 mm Motorized feed support Table extension ( 2400mm) with extensible workpiece support length 3000 mm, 700 mm extendable to the front Integral fence jaws swinging support for fence. The fence will be lifted via handwheel from the table Wegoma feeder Variomatic 4N, 4 rolls - feed speed 0,5 - 24 m/min

macchina per acqua e olio - precedentemente utilizzata con acqua funzionamento anche in depressione EV raffreddamento e carico automatico nuove

LINEA ESTRUSIONE PER TUBI Estrusore monovite diametro 60 L/D 30 motore A/C 100 kW Testa di estrusione per tubo diametro 13,25 mm nr.2 viti di ricambio usate nr.2 vasche raffreddamento con pompe acqua e spruzzatori nr.2 vasche di raffreddamento statiche Marcatrice Citronix Traino a cingoli contrpposti Avvolgitore doppio PM Imnpianti nr.2 Viti usate di scorta