kuplex t used for sale

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Artec, TIG welding machine -Cooling: Water-cooled -Type: TIG 235 i DC -Welding current: max. 225 A -incl.: ground cable, throttle valve, hose assembly -Dimensions: 880/430/H645 mm -Weight: 87 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Transfer in current condition as seen -Machine must: be overhauled electrically (FI circuit breaker trips) -Grinding points: 4 -Angled tables on vibrating tables: 3 -Vice for chip breaker groove: 1 -Max. Steel cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 1500/1500/H1400 mm -Weight: 1004 kg

TIG welding rod, welding wire Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades. -net weight: 5 kg -Number: 2x package available -Price: per package -Weight complete: 5.2 kg/package

TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 -Heating output: 9 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc.

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000mm -Number: 2 thermostats available -Price per piece -Dimensions package: 245/130/H80 mm -Weight: 1.1 kg/pc.

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: GST Schneider, Transformer Type 13GST108 -Power: 0.384 kW -Technical data: see photo of the nameplate -Motor protection switch: Telemecanique GV2-RT05 -Number: 2x transformer available -Price: per piece -Dimensions: 360/205/H115 mm -Weight: 12.2 kg/pc.

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system -Manufacturer: SCS Stäfa, temperature sensor control system unused original packaging -Type FT-TH2 -Item no.: 0 873 80-03 -Measurement probe: Screw-in length approx. 75 mm -Dimensions cardboard: 155/80/H55 mm -Weight: 0.3 kg

Tool holders for milling chucks, spindle head holders, modular tool pockets, tool holder sets, assembly trolleys, CNC transport trolleys -Assembly trolley: for 64 pieces of SK50 tool holder -Transport trolley: heavy-duty design -Number: 2 trolleys available, 1 with 2 swivel casters / 1 with 4 swivel casters Price: per piece -Dimensions: 1140/500/H930 mm -Weight: 60 kg / 63 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 ID.No. 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat temperature switch, unused, original packaging -Type: TBFR 112 spec. -Temperature range: 18 to 55 °C -Cardboard dimensions: 220/120/H50 mm -Weight: 0.5 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

PLC control, mains filter, mains filter, Simodrive choke transformer -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Chorus: Type 6SN 1111-0AA00-0BA0 -Transformer: Trasfor TNT BN 2K5/E -Price/Delivery: complete -Dimensions: 525/240/H230 mm -Weight: 33.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: Teco, clamping tool clamping bracket, various designs -End terminal: Type 30501 / 30502 / 30503 2 pieces each -Step block: Type 40102 / 40103 / 40104 4 pieces each -Clamping bolt: thread M10, see photos 24 pieces -Price/Delivery: complete -Dimensions: 390/190/H210 mm -Total weight: 6.5 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 820 mm -Dimensions retracted: height 240 mm -Extended dimensions: height 1140 mm -Rollers: diameter 40 x 500 mm, roller spacing 100 mm -Rail spacing: 1554 mm -B. Pressure: 160 bar -Weight: 372 kg

Scissor lift table, scissor lift table, scissor lifting platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 760 mm -Dimensions retracted: height 225 mm -Extended dimensions: height 1140 mm -Rollers: diameter 40 x 510 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1490 mm -Weight: 350 kg

Telecentric lighting, LED lighting, Telecentric lens, Measuring lens, Industrial camera -Manufacturer: Basler Vision Control, industrial camera with telecentric lens -Camera: Basler Type piA2400-17gm -Lens: type vicotar T201/0.15 -Total dimensions: Ø 70 x 345 mm -Weight: 1.2 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor -Load capacity: 1000 kg -Platforms: 2420 x 710 mm -Dimension retracted: height 230 mm -Extended dimensions: height 1100 mm -Rollers: diameter 40 x 495 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Weight: 360 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, triple hydraulic pump -Type: ZZ EP 0012 / 32 AP 0168 / TK11/11/6SF -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 2x pumps available -Price: per piece -Dimensions: 320/90/H115 mm -Weight: 9.1 kg/piece

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels -Manufacturer: DURO, trailer tire with tube and rim -Type: Trailer 8 HF-296-2 -Tire size: 5.00-8 -Hub: Ø 30 x 90 mm -Quantity: 1x tire available -Dimension: 450/450/H130 mm -Weight: 9.4 kg

transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer -Manufacturer: Yoen, three-phase transformer type 20-0442NGG -Power: 11 kW -Voltage: Pri. 400V/sec DC 48 V -Technical data: see photo type plate -Dimensions: 855/620/H680 mm -Weight: 197 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 2 pieces -Type: PTPk-6/5 / MK6/5 -Shipping/Price: complete -Transport dimensions: 127/64/H148 mm -Weight: 4.0 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Konecranes, electric chain hoist with powered trolley -Chain hoist: Type XN10 1604 b1 load capacity 1600 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5.4 m -Crane chassis: TDV 1600 20/5 m/min -Carrier width: max. 310 mm -Dimensions: see photo technical drawing -Transport dimensions: 1200/700/H550 mm -Weight: 110 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 4 pieces -Type: MK6/5 2 pieces / MK6/4 / MK6/3 -Shipping/Price: complete -Transport dimensions: 260/220/H65 mm -Weight: 11.8 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear, tank roller plates, machine transport chassis -Support plate: Turntable for machine transport chassis 3 pieces -Load capacity: t -Plate: Ø 155 mm -Shipping/Price: complete -Dimensions each: 280/160/H65 mm -Weight: 7.6 kg/piece

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear, tank roller plates, machine transport chassis -Support plate: Turntable for machine transport chassis -Load capacity: t -Plate: Ø 145 mm -Quantity: 1 pc. available -Dimensions: 230/145/H80 mm -Weight: 7.1 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear, tank roller plates, machine transport chassis -Support plate: Turntable for machine transport chassis -Load capacity: t -Plate: Ø 120 mm -Quantity: 1 pc. available -Dimensions: 210/120/H70 mm -Weight: 4.5 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: 4 tank rollers -Load capacity: 30 t (7.5t per piece) -Support height: 110 mm -Plates: 3x Ø 140 mm / 1x width 135 mm -Submission/Price: complete -Dimensions of transport case: 1005/200/H165 mm -Total weight: 57 kg.

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5 2 pieces -Type: MK5/4 -Shipping/Price: complete -Transport dimensions: 345/100/H50 mm -Weight: 7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, extension sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 400 / 475 mm -Shipping/Price: complete -Transport dimensions: 475/44/H22 mm -Weight: 2 kg

Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks, hydraulic cylinders -Manufacturer: WMW, clamping cylinder stroke 20 mm -Type: 25 TGL 30-7311 -Shaft Ø 14 mm -Number: 16x clamping cylinders available -Price: per piece -Dimensions: Ø 35 x 127 mm -Weight: 0.6 kg/pc.

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with weighing unit and trolley, each without control, and weighing display -Load capacity: 2000 kg -Platform: 4000 x 1420 mm -Dimensions retracted: height 430/675 mm -Extended dimensions: height 1145/1390 mm -Rolling chassis: roller spacing for rail 1100 mm -Transport dimensions: 1420/4000/H675 mm -Weight: 2600 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller transport roller Cargo Trolley type CT-8 -Load capacity: 12000 kg -Rollers: 8 polyurethane rollers -Number: 4x transport rollers available -Price: per piece -Dimensions: 480/200/H100 mm -Weight: 25 kg/piece

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller transport roller Cargo Trolley Type CT-12 -Load capacity: 18000 kg -Rollers: 12 polyurethane rollers -Number: 4x transport rollers available -Price: per piece -Dimensions: 480/310/H100 mm -Weight: 36 kg/piece

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Handover: in its current condition as inspected -Note: Check the condition of the wheels -Heavy-duty transport wagon: Industrial trailer with single-axle steering -Beam spacing: 5860 mm / Height adjustable from 850 to 1255 mm -Load capacity: 11 t -Tires: 405/130-305 solid rubber dual tires -Overall dimensions: 7600 / 2000 / H 850 mm -Weight: 1080 kg

Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack, aluminum jack, hydraulic lifting stand -Manufacturer: Tangye, Aluminum jack, hydraulic lifting jack 6.5 ton -Type: Hydramite plus -Stroke travel: 76 mm -Shaft: Ø 30 mm -Quantity: 1x lifting jack available -Dimensions: 240/100/H135 mm -Weight: 3.9 kg/pc.