kuplex t used for sale

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 91920 € : 1737.29 € : 860 mm : 3000 mm : 430 mm : 135 mm : 620 mm : 560 mm : 11 : 140 M : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low volt ...

TO WHOM IT MAY CONCERN, GDY WE VE USED COMPLETE EXHAUST GAS TURBOCHARGER ABB TPL 77-B12 AT OUR STOCK WE DISMANTLED THIS TURBO CHARGER FROM MAN 6L 50 MC-C ENGINE PLS FIND SPEC AT BELOW

CNC Vertical Turret Lathe with C axis and live tool 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Max. turning dia.: 2200 mm Max. turning height: 1800 mm Ram travel: 1500 mm Main drive: 75 kW Live spindle: 15 kW Spindle rotations: 45- 1350 1/min Max. workpiece weight: 12 000 kg Pallet changer with 3 pallets (turning plates) Tool magazine: Right: 8 turning tools Left: 8 boring/milling tools Feeds: 0,1-6000 mm/min Carriage feed: Vertical: 1500 mm Horizontal: 1320 mm Table rotation (2 ranges): 2,5 – 70 / 10-280 Max. table torque: 50 000 Nm Machine weight: 43 Ton Machine HxWxL: 6,8 m x 10 m x 9,7 m

Inv. Num. : 9003 Type: SK 12 P1 Producer: TOS Created: 1961, GO 1980 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm Weight: 19500 kg Equipment: DRO

Inv. Num. : 9006 Type: SK 12 Producer: TOS Created: 1959 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece height: 1000 mm Max. workpiece diameter: 1250 mm Weight: 19500 kg

Inv. Num. : 9004 Type: SK 12 Producer: TOS Created: 1962, GO 1982 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm Weight: 19500 kg

For sale is a Tool Temp temperature control unit Works without any issues. To sell due to business closure. Technical specifications in the pictures. Self-collection and dismantling. Price per piece 2 pieces in stock Price is net plus VAT All information without guarantee

The Tetra Pak Tetra Straw Applicator (TSA 46) has a compact design and is very reliable. Trouble-free operation in a carton filling lines is guaranteed even with long periods of use. It is installed between the filling machine and the packaging machine and has servo motors and inverters. The regulated and controlled application of the straw is thus made possible without any problems. The constant and trouble-free speed of up to 8.000 units/h is ideal for use in conjunction with the Tetra Pak TBA 19 filling machines. Previously used for 200 ml Slim cartons with U-Straw 4. Production hours: 92.204 hours. Including Nordson ProBlue 4 hotmelt unit. MM + SPC + EM Manuals available., Type of Machine: Straw applicator, Capacity: 8.000 pieces per hour, Type of carton: 200 ml Slim, Development step: 10V, Drawing spec.: 678547-0101, Production hours: 92.204 hours, Dimensions: ± 230 x 100 x 210 cm, ...

The Tetra Pak Tetra Cardboard Packer 70 (TCP 70) is an automatic secondary packaging machine designed for grouping and packing filled Tetra Pak carton packages into wrap-around cardboard or corrugated board cases. It is widely used in dairy and beverage packaging lines operating in ambient conditions. It is flexible and has a number of possibilities when it comes to package sizes, packing patterns and cardboard units. This machine is previously used for 1 Liter Slim / Base cartons, 4x2, in a tray (not wraparound). Output: up to 7.000 cartons/hour (depending on format and configuration). Feeding side: Left hand. Infeed type: Multi. Infeed: U-form. Conveyor speed in: 35 m/min. Conveyor width: B79/B65. Hotmelt unit (Robatech KPC12, serialnr 134590, year 2005)., Type of Machine: Cardboard Packer, Capacity: up to 7.000 cartons per hour, Type of carton: 1.000 ml Slim / Base, Development step:  ...

Tetra Top Granulate Supply Unit (GSU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including side channel blower and vacuumpump from Gardner Denver, G-BH1 2BH1510-7HH57, 4 kW - 345 / 415 V - 50 Hz - 2.920 rpm, pressure: 390 - 440 mbar and control panel with Allen-Bradly PLC., Type of Machine: Granulate Supply Unit, Capacity: 9.000 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0500, Drawing spec.: C-1025041-0500, Weight: ± 250 kg

CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...

Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3 ...

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

The Tetra Pak TBA 9 is a type of filling machine designed for the aseptic packaging of liquid food products. Here are some key details:, - Type of Packaging: The TBA 9 is known for its ability to handle a variety of liquid products, such as juices, dairy, and sauces, using Tetra Paks carton systems., - Capacity: This filler typically has a capacity range suitable for small to medium production lines. It can fill various carton sizes, including the 200 ml format., - Aseptic Technology: The TBA 9 uses advanced aseptic technology to ensure that products are safely packaged without the need for preservatives, extending shelf life while maintaining product integrity., - Features:, - High efficiency and low waste during the filling process., - Flexibility to switch between different carton formats and sizes., - User-friendly interface for easy operation and monitoring., - Applications: Ideal f ...

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Control Winmax Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-Station Turret with Driven Tools VDI 40 Chip Conveyor, IRCO Short Bar Feeder IRS-RBK 1001 Tool Measurement Parts catcher

General SKU221Y085 MakeRieger Serial20200536-10 Type3850 l. Main Features MaterialStainless steel Volume3850 Ltr. Pressure1 Bar Specified Features - Vertical tank MaterialStainless steel 1.4404 (316L) Closed vertical tankcheck Capacity3500 l. (3850 l.) Vessel sizesø 1800 x 2000 mm Conical bottomcheck Manholeø 420 mm Top connectionsDN40 OutletDN50 Max. temperature50 °C Information Year of construction2021 Mounted on legscheck LocationBarneveld Floorspace1,80x1,80 m Total height3,00 mVertical tanksRiegerTanks > Vertical tanksBrand > Rieger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Dough Treadmill Double-sidedIdeal for 1 dough parts 2 plantProduct descriptionManufacturer: ReichType: Conveyor belt Total treadmill approx. 14mCondition: used1x Right Left TreadmillCan you adjust whether the dough goes to the right treadmill or right1x L bow treadmillWith lid pendant made of stainless steelDetails see pictures.

Professional rolling pin, rolling pin, dough roll 40cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 40 cm• Total length: 67 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 30cm NEWâ Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 30 cm• Total length: 57 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 35cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 35 cm• Total length: 62 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 25cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 25 cm• Total length: 52 cmDetails see pictures

FOR SALE steam turbine year 1997

Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm

Secomak Shrink tunnel Serial: 6905 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

Inv. Num. : 9028 Type: SK 12 Producer: TOS Created: 1971 Parameters: Equipment: Accessories

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

Model: TG2000/600 Condition: Used Serial Number: 248 Stock Number: 3269 Belt width: 600 mm Belt length: 3000 mm Power: 3 x 380V, 50Hz, 0.25kW Dimensions: 3200 x 900 x 1150 m

Used tube machine for filling and sealing plastic tubes from Fullmatik type Tubeline PK. Instrumentation for tubes fi 19-30-35-40-50. Manufacturer's documentation. CE Year of manufacture 2021.

General SKU399X1181 LocationBarneveld CEcheck MakeAermec Main Features Heating (medium)Ammonia Capacity19.7 KW Temp.7 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck With coolingcheck Capacity19,7 kW Temperature7 °C With pumpcheck With temperature controllercheck With controlcheck Information TypeWRL081 EA P Mach.No.646695 Year of construction2017 With switchcheck With switchgearcheck Floorspace0,78 x 1,15 m Total height1,1 m Weight450 kg Extra SpecificationsRefrigerant: R410A Refrigerant charge: 0,50 kg Pump type: On-off Pump side: System side Compressor type: Scroll Temperature control unitsAermecHeat exchangers > Temperature control unitsBrand > Aermec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

Key data: 300 °C, 12 kW

1.0 St. gebr. Temperature control unit Manufacturer: TOOL - TEMP Type: TT - OIL 300, 12 kW Year of manufacture: Medium: OIL Temperature: 300° C Heating capacity: 12 kW

General SKU327X676 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity7.5 KW Temp.140 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity7,5 kW Temperature—25 / 140 °C Tank capacity50 l. With pumpcheck(2x) Capacity4 m3/h Motor2x 3 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR350HT Mach.No.HKS08078 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,00 x 1,50 m Total height2,00 m Weight1500 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destin ...

General SKU327X677 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity4.5 KW Temp.45 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity4,5 kW With coolingcheck Temperature-25°C/+45°C Tank capacity80 l With pumpcheck 3x Capacity1,4 m3/h Motor3 x 1,1 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR400T Mach.No.HKS08079 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,30x1,90 m Total height2,00 m Weight2000 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...

General SKU394U1128 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity300 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Heating medium:Therminol D12 Heating capacity300 kW Electric capacity306,45 kW, 400Volt Temperature-40°C/+200°C With pumpcheck Capacityunknown. Motor5,5kw, 400/690 volt, 2880rpm (ex) Information TypeTR400 HHKT-EX Mach.No.HKS08019 Year of construction2008 Floorspace2,15x1,00 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU394U1111 LocationBarneveld CEcheck MakeLauda Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt, , (Ex) Temperature-35/130 ºC With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information TypeTR400HK/K-EX Mach.No.HSK13074 Year of construction2013 With switchcheck Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU278N326 LocationBarneveld MakeLAUDA TypeSUK 400 W-EX Main Features Heating (medium)Electric Capacity27 KW Temp.20 °C Specified Features - Temperature control unit Temperating machineProcesscoolingsystem Heating medium:Downtherm J With coolingCoolingmedium R404 A Temperature-40 /20 gr.C. With pumpcheck Motor37 KW, 400 Volt (Ex) With temperature controllercheck Information Mach.No.HKS08013 Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace1,3x1,9 M Total height2 M Weight2300 KG ATEX compatiblecheck Technical specs Extra informationheatingsystem 8 bar, coolingsystem 28 barTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...

General SKU327X678 LocationBarneveld CEcheck MakeLauda Pressure Working pressure28 Bar Main Features Heating (medium)Water glycol Capacity15.5 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating capacity15.5 kW With coolingcheck R404a Temperature—30 / 120 °C With pumpcheck Capacity67 l./min With temperature controllercheck Information TypeT 10000 W Mach.No.LWP210-08-0005 Year of construction2007 Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace0,85 x 0,80 m Total height0,97 m Weight242 kg Extra SpecificationsWorking temperature range: —30 / 120 °CTemperature control unitsNew arrivalsLaudaHeat exchangers > Temperature control unitsNew arrivalsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready fo ...

diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

bushing cut-off , PKO diameter range 2-6 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 95 mm shaft length under head 75 mm output - pieces/min 80-200

Key data: 90 mm, 1250 mm, 900 mm

Inv. Num. : 9038 Type: W 9 Producer: TOS Generated: Parameters: Work table length: 950 mm Work table width: 950 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Equipment: DRO (3 axes) Rear support column Clamping angle Tools

General SKU437X1383 LocationBarneveld Pressure Working pressure shell45 Bar Vacuum possible shellcheck Working pressure tubes25 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface30 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface30 m² Tube capacity190 l. Number of tubes:40 Tube diameter25 mm Tube length10 600 mm Wall thickness tubes2 mm Max. temperature250 Shell capacity420 l. Shell diameter400 mm Shell length6 400 mm Max. temperature250 Shell connectionsDN80 Cover connectionsDN80 Information MakeK.ley Eiterfeld Serial5654 Magento base g_extra_specificationsPressure -1/25 bar, volume 190 l., allowable temperature 250°C, jacket volume 420 l., pressure -1/45 bar, 30 m2, own weight 1800 kg, drawin ...

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimension: 1300/570/H900 mm -Weight: 262kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -rotating platform: 3460 x 2700 mm -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 7000 kg -Tires: solid rubber -Trailer hitch -External dimensions: 5530/2700/H590 mm -Own weight: 1410 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 6800 kg -Tires: solid rubber -Trailer hitch -External dimensions: 4760/2730/H585 mm -Own weight: 1100 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece