kuplex t used for sale

General SKU422W1590 LocationBarneveld MakeEngineering Systems TypeTabcap 5 No.9292 Year of construction1992 Main Features MaterialStainless steel Inlet diameter0.5 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity220 volt Information Mounted on wheelscheck With switchgearcheck Total height1,35 m Weight220 kg Floorspace1,0x0,70 m Extra SpecificationsWith RNA vibration funnel, type SRC-N, : X, Y travel table, tablet frames and tooling Miscellaneous transportTabcapConveying systems > Miscellaneous transportBrand > Tabcap What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU326X668 LocationBarneveld MakeLödige TypeFM130 D/1MZ No.8219 Year of construction1976 Main Features MaterialStainless steel Volume130 Ltr. Motor6.6 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity130 l. Trough sizesDia. 500x660 mm InletDia. 200 mm Inspection hatch520x310 mm OutletDia. 250 mm Glands air purgedcheck Motor6,6 kW, 500 volt, 960 rpm With lump breakercheck Motor3,3 kW, 500 volt, 2880 rpm Speed lumpbreaker2880 rpm MaterialStainless steel 1.4306 (304L) Information Mounted on framecheck Sizes switchgear0,40x0,25x0,60 m Total height2,20 m With switchcheck Floorspace1,90x1,40 mPowder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU326X667 LocationBarneveld MakeLödige TypeFM-50L/1MZ No.8218 Year of construction1976 Main Features MaterialStainless steel Volume50 Ltr. Motor2.2 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms4x Capacity50 l. Trough sizesDia. 400x400 mm InletDia. 25 mm Inspection hatchcheck Outlet110x90 mm Motor2,2 kW, 290/500 volt, 179 rpm With lump breakercheck Motor2,2 kW, 290/500 volt, 2840 rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck Mounted on wheelscheck Total height1,80 m With switchcheck Sizes switchgear0,40x0,25x0,60 m Floorspace1,60x1,00 mPowder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

General SKU204W1596 LocationBarneveld MakeS.A.G. No.12327-5 Year of construction2007 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell8 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel Heat exchangercheck Verticalcheck Heating surface2 m2 Tube capacity16 l. U-typecheck Tube length1100 mm Max. temperature-20°C/+160°C Shell capacity35 l. Shell diameter200 mm Shell length1350 mm Max. temperature0°C/+180°C Shell connectionsDN25 Cover connectionsDN25 Information Total height1,60 m Weight90 kg CEcheck Floorspace0,50x0,50 mShell and tube heat exchangersSagHeat exchangers > Shell and tube heat exchangersBrand > Sag What you c ...

General SKU397X1090 LocationBarneveld MakeLauda TypeSUK 250W Mach.No.B 13008 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity9 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity9 kW With coolingcheck (Water) Capacity13 kW at +20 °C Temperature-25/80 °C With pumpcheck Capacity2 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck Total height1,92 m CEcheck Floorspace1,63 x 0,78 m Weight800 kg Extra Specifications Connections (outflow/return): :Flanges DN25: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Sterling SIHI Filling capacity: approx. 60 L Refrigerant: R 404 A Filling volume: 6 kg  ...

General SKU397X1086 LocationBarneveld MakeLauda TypeSUK 250 W Mach.No.B 13009 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity9 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity9 kW With coolingcheck (Water) Capacity13 kW at +20 °C Temperature-25/120 °C Tank capacity60 Ltr. With pumpcheck Capacity2 m³/h With controlcheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height1,92 m CEcheck Floorspace0,78 x 1,63 m Weight850 kg Extra Specifications Compressor: Semi-hermetic reciprocating compressor Delivering pump: Sterling SIHI Filling capacity: approx. 60 L Refrigerant: R 404 A Refrigerant filling volume: 6 kg (approx. 5–7 L) Connections (outflow/return) ...

General SKU397X1089 LocationBarneveld MakeLauda TypeSUK 400 W Mach.No.B 15623 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity20 KW Temp.30 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck (chiller) Heating medium:Water/Glycol (1:1) Heating capacity52 kW With coolingcheck Capacity20 kW Temperature-30/30 °C Tank capacity± 75 Ltr. With pumpcheck Capacity3 m³/h With temperature controllercheck Information Year of construction2003 Mounted on framecheck Total height2,5 m CEcheck Floorspace0,98 x 2,29 m Weight1210 kg Extra SpecificationsCompressor : : : : : : : : : : : : : : :� �: : : : : : : : : : : : : : : : : : : : : : :  : : : : :Semi-hermetic reciprocating compressorOperating temperature : : : : : : : : : : : : : : : : : : :  : ...

General SKU397X1088 LocationBarneveld MakeLauda TypeTR400HKK Mach.No.B 16329 Pressure Working pressure18 Bar Main Features Heating (medium)Steam Capacity6 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4301 (304) Temperating machinecheck Thermal oil heatercheck Water heatercheck Heating medium:Steam / Water Heating capacity6 kW With coolingcheck (Cooling and Deep Cooling) Temperature-30/200 °C Tank capacity120 Ltr. With pumpcheck Capacity10 m³/h Motor5.5 kW With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck Total height2,52 m CEcheck Floorspace2,27 x 0,98 m Weight1540 kg Extra SpecificationsHeating : Type of primary energy: Steam Transfer area (heat exchanger): 4 m² Connections: DN25 / DN50  : Cooling (K) Type of primary energy: Cooling wat ...

General SKU397X1085 LocationBarneveld MakeLauda TypeTR 150 K Mach.No.HKS10 119 Pressure Working pressure6 Bar Main Features Heating (medium)Electric Capacity1.5 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Temperating machinecheck Water heatercheck Heating medium:Water/Glykol (60:40) Heating capacity1.5 kW With coolingcheck (Water/Glykol (60:40)) Temperature-20/80 °C Tank capacity80 Ltr. With pumpcheck Capacity± 10–12 m³/h Motor1,1 kW With controlcheck (as is) Information Year of construction2010 Mounted on framecheck With switchgearcheck Total height1,05 m CEcheck Floorspace0,69 x 1,32 m Weight450 kg Extra SpecificationsHeat Transfer Circuit Design temperature: –20 °C to +80 °C Design pressure: –1 bar to +6 bar(g) Delivery pump: WILO Type: BL32/210 ...

General SKU397X1104 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.HSK07001 Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity25 KW Temp.70 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Heating medium:Water / Glycol 80:20 Heating capacity25 kW Electric capacity51 kW, 400 volt With coolingcheck Capacity15 kW at 0 °C Temperature0/70 °C Tank capacity30 Ltr. With pumpcheck Capacity6 m³/h Motor3 kW With temperature controllercheck (PID controller SR 500 - as is) Information Year of construction2007 Mounted on framecheck Total height2,24 m CEcheck Floorspace1,2 x 1,9 m Weight1100 kg Extra Specifications Connections (outflow/return): :DN 32 Compressor: Hermetic piston compressor Delivering pump: 6 m³/h Pump motor: 3 kW Filling volume (heat carrier circuit): approx. 30 L Refriger ...

General SKU397X1129 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.B14 730 Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With coolingcheck (Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace1,14 x 1,5 m Weight950 kg Extra Specifications Connections (outflow/return): :Flanges DN50: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos C ...

General SKU397X1130 LocationBarneveld MakeGWK Typeweco 15 WZTX (weco e z 8 w m10p7 pt 6v aa X) Mach.No.290201-01-01 Pressure Working pressure12.2 Bar Main Features Capacity8 KW Temp.7 °C Specified Features - Temperature control unit Temperating machinecheck (chiller) Water heatercheck Electric capacity.. kW, 230/400 volt With coolingcheck Capacity8 kW Temperature7 °C Information Year of construction2011 Mounted on framecheck With switchgearcheck Total height1,8 m CEcheck Floorspace1,3 x 1 m Weight450 kg Extra Specifications Cooling medium: R404A Maximum refrigerant fill weight: 1.42 kg Compressor volumetric flow: 22.1 m³/h Temperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

General SKU397X1165 LocationBarneveld MakeLauda TypeSUK 250 W Mach.No.HKS10 047 Pressure Working pressure shell10 Bar Working pressure tubes16 Bar Main Features Heating (medium)Oil Capacity18 KW Temp.200 °C Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4306 (304L) Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity18 kW Electric capacity18 kW With coolingcheck Capacity10 kW at –20 °C Temperature-30/175 °C Tank capacity50 Ltr. With pumpcheck Capacitymax. 15 m³/h Motor5,5 kW With temperature controllercheck (PID controller (LAUDA SR 600) as is) Information Year of construction2010 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace0,78 x 2 m Weight1300 kg Extra SpecificationsGeneral Design Power supply: 400 V / 3 Ph / PE / 50 Hz Power consumpti ...

General SKU332X713 LocationBarneveld MakeIgefa Weinbrenner Type061U-600-600 No.50467 Year of construction2014 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface41 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface41m² Tube capacity582 l. Number of tubes:178 Tube diameter33,7 mm Tube length2200 mm Wall thickness tubes2 Max. temperature0°C/+200°C Shell capacity252 l. Shell diameter600 Shell length2500 Max. temperature0°C/+200°C Shell connectionsDN80 Cover connectionsDN500 Information Mounted on framecheck Total height2,60 m Weight1959 kg CEcheck Floo ...

General SKU388X984 LocationBarneveld MakeRNA TypeProzesstank No.JRN-40411-B02 Year of construction1988 Pressure Working pressure1 Bar Working pressure jacket0 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure1 Bar Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity500 l Vessel sizesDia 800 mm x 1250 mm Dished topcheck Dished bottomcheck Top connections5 X (300 mm, 100 mm, 25 mm, 37,5 mm, 50 mm) Outlet50 mm With jacketcheck Information Total height2,2 m Weight160 kg Floorspace0,9x0,9 mVertical tanksRNA Ratio Norm AnlagensystemeTanks > Vertical tanksBrand > RNA Ratio Norm Anlagensysteme What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU382X963 LocationBarneveld MakePharmatech No.SL10244 Year of construction2001 Main Features MaterialStainless steel Motor2.5 KW Height3500 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting + tilting machinecheck Max. weight250 kg Lifting height3500 mm Mechanical drivecheck ( 0.25 kW to tilt the vessel) Hydraulic drivecheck (2.6 kW to lift the vessel) With hydraulic unitcheck Motor2.6 kW Suitable for product sizesDia 550 mm Lifting/tilting machines Capacity250 kg Information Mounted on framecheck With switchcheck Floorspace1 x 2 m CEcheck Total height3,8 m Weight1200 kg Extra SpecificationsThis hoist was installed in its original configuration with multiple accessories. - Pharmatech flexisieve 350 0.1m², SKU 382X961 (SOLD) - Pharmatech 2000 ltr double cone blender SKU 382X962 - Pharmatech floor scale, SKU: ...

General SKU373X904 LocationBarneveld MakeAse Apparatenbau GmbH Type16 m² Tantal No.00093 Year of construction2000 Pressure Working pressure shell8 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti), tantalum Heat exchangercheck Horizontalcheck Heating surface16 m² Tube capacity100 Ltr. Number of tubes:62 Tube diameter20 mm Tube length3000 mm Max. temperature-30 / 200 °C Shell capacity153 Ltr. Shell diameter300 mm Shell length3700 mm Max. temperature-30 / 200°C Shell connectionsDN110 Cover connectionsDN200, DN110, DN60 Information Total height0,75 m Weight580 kg Floorspace3,72 x 0,55 m Extra SpecificationsMaterial tubes HII/TantalShell and tube heat exchangersASE App ...

General SKU211N1317 LocationBarneveld MakeHTT TypeCPS 05-2-28-1-2-S Year of construction1998 Main Features Heating (medium)Oil Capacity28 KW Temp.280 °C Specified Features - Temperature control unit Thermal oil heatercheck Heating medium:Marlotherm LH Heating capacity28 kW With coolingcheck Capacity43 kW Temperature280°C With pumpcheck Capacity7,2 m3/hr With temperature controllercheck Information With switchcheck With switchgearcheck Floorspace1,2 x 0,4 m CEcheck Total height1,2 m Weight250 kgTemperature control unitsHTTHeat exchangers > Temperature control unitsBrand > HTT What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 58 mm

We can offer a Toshiba extruder. 58/40, year 2010, stopped, working condition.

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

General SKU373X900 LocationBarneveld MakeZürcher AG Type25 m² No.2934 Year of construction2014 Pressure Working pressure shell13 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Hastelloy Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L), Stainless steel 2.4602 (Hastelloy C-22) Heat exchangercheck Verticalcheck Heating surface25 m² Tube capacity300 Ltr. Number of tubes:199 Tube diameter23 mm Tube length1700 mm Max. temperature-30/200 °C Shell capacity260 Ltr. Shell diameter500 mm Shell length1900 mm Max. temperature-30/200°C Shell connectionsDN80 Information Total height1,90 m Weight650 kg CEcheck Floorspace1,10 x 0,90 m Technical specs Extra informationWithout side cover platesShell and tube hea ...

General SKU373X899 LocationBarneveld MakeZürcher Type25 m² No.2935 Year of construction2014 Pressure Vacuum possiblecheck Working pressure shell13 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Hastelloy Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L), Stainless steel 2.4602 (Hastelloy C-22) Heat exchangercheck Verticalcheck Heating surface25 m² Tube capacity300 Ltr. Number of tubes:199 Tube diameter23 mm Tube length1700 mm Max. temperature-30/200 °C Shell capacity260 Ltr. Shell diameter500 mm Shell length1900 mm Max. temperature-30/200°C Shell connectionsDN80 Information Total height1,90 m Weight650 kg CEcheck Floorspace1,10 x 0,70 m Extra SpecificationsWithout side cover platesShell and tub ...

Diagonal duct fan, 3x230V, 500mm, 9880m³/h, TDE 500 D4, Red Ring, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. Diagonal tube fan, 3x230V, 500mm, 9880m³/h, 1.5 KW, TDE 500 D4, Red Ring, as good as new -40% Aluminium housing and impeller 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and cond ...

WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt.

General SKU321T837 LocationBarneveld MakeTurbula TypeS 100 No.681129 Main Features MaterialMild steel Motor1.7 KW Specified Features - Tumbler mixer MaterialMild steel Tumbler mixercheck Barrel mixercheck Diameter520 mm Length/Depth745 mm With motor1,7 kW, 380 Volt With variable speed drivecheck Speed mixer14/19/28 rpm Information Mounted on mild steel framecheck With switchcheck With switchgearcheck Floorspace1,6x1,6 m Total height1,8 m Weight1000 kgTumbler mixersTurbulaMixers > Tumbler mixersBrand > Turbula What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU397X1103 LocationBarneveld MakeLauda TypeSUK 400 W Mach.No.HSK04075 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity30 KW Temp.160 °C Specified Features - Temperature control unit MaterialCopper Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity30 kW Electric capacity88 kW 400 V With coolingcheck Capacity20 kW Temperature-20/160 °C With pumpcheck Capacity5 m³/h With temperature controllercheck Information Year of construction2004 Mounted on framecheck With switchcheck CEcheck Floorspace0,98 x 1,9 m Total height2,3 m Weight1750 kg Extra SpecificationsCompressor: Semi-hermetic reciprocating compressor Operating temperature: -20°C … +160°C Temperature control: PID controller Temperature measuring element: Pt 100 Control deviation: less than 1 K Heat carrier: Therminol D12 Delivering pump: Sterling ...

General SKU428W1355 LocationBarneveld MakeGFKK TypeTKK Year of construction1998 Pressure Working pressure24 Bar Main Features Heating (medium)Ammonia Capacity22 KW Temp.160 °C Specified Features - Temperature control unit MaterialMild steel, Stainless steel Temperating machinecheck With coolingR507 / R23 Temperature-70°C/+160°C Tank capacity1,5 m3 With pumpcheck Information Mounted on framecheck With switchgearcheck Total height2,50 m CEcheck Floorspace6,0x2,5 m Extra SpecificationsWith 4x Bitzer cool compressors, type 6G-30.2 Y, volume 126,8 m3/h, 19/25 bar, : Alfa Laval plate heatexchanger, type TM10-BFM, 10 bar, volume 56,7 l., : Schmidt plate heatexchanger, type ST12-PE0085, volume 12 l., 25 bar, : 2x Textoris horizontal stainless steel tank, volume 1007 l., 1x Textoris horizontal vessel, volume 1500 l., pressure 2 bar, : 3-doors control/power cabinet ...

General SKU394U1134 LocationBarneveld MakeLauda TypeTR 400 HKT/KT-EX Mach.No.HKS08032 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) Information Year of construction2008 Total height2,5 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU394U1129 LocationBarneveld MakeLauda TypeTR400 HHKT-EX Mach.No.HKS08020 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity300 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heatercheck Therminol D12 Heating medium:Oil Heating capacity300 kW Electric capacity306,45 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck Capacityunknown Motor5,5 kW, 400/690 Volt, 2880 rpm (EX) Information Year of construction2008 CEcheck Floorspace2,15x1,0 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

General SKU429T1358 LocationBarneveld MakeBrabender OHG Duisburg Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extrudercheck (and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C Viscosity test machines MaterialStainless steel Information TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

Converters Frequency Converters, Frequency Converters, Drive Inverters -Manufacturer: Himmel Tübingen -Type: 2GL 132/175-1.JPG 132/240 -TUmformer No.: 393 733 A 12 -Input: 380V 50Hz -Output: 165V 300Hz -Power: 11 KW -Dimensions: L950/D440/H340 mm

Temperature control unit Jufeba TG 1-3 T Jufeba Model: TG 1-3 T Tabletop device with container Stainless steel Dry heating Manual temperature control Robust technology Connection 230V Used device cleaned with warranty + spare parts service Option: Maintenance contract Stainless Steel GM Tank Delivery Instruction & Commissioning

Temperature control unit Jufeba Tabletop Model: TG 2-2 T Container approx. 2 x 20 litres Stainless steel Dry heating Electronic temperature control Connection 230V, 1600 Watt Dimensions: 575 x 825 x 220 mm, WxDxH Used device cleaned We have many more temperature control units in stock!

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...

Demag 60 ton x 24 100 mm Kind of: overhead travelling crane Capacity: 60 ton Span: 24 100 mm Drop: 23 meter Tackle speed: 1 & 4 m/min Rotationspeed: 12,8 & 50 m/min Displacementspeed: 8 & 92 m/min Numbre of riggers : double rigger

ID3683 Deutz TT3 year/Baujahr 2003 13.390 hours/hours 6.9 t

Stroj je v dobrém technickém stavu, po předchozí dohodě možnost odzkoušení.

Offered is a high-voltage switchgear device ZK8 System Calor Emag from Peters & Thieding. Year of construction 1994, standard series VDE 0670 (IEC 62271), rated voltage 24.2kV, insulation level 50/125kV, rated frequency 50Hz, operating current 630A, short-time withstand current 20kA, short-circuit duration 1s. Viewing is possible by arrangement.

Key data: 900 mm, 5000 mm

Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system

General SKU392W1205 MakeSGL Carbon LocationBarneveld CEcheck TypeRS 77-1-295.40.1 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Mild steel Tube (Material)Diabon Surface100 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon, Mild steel Heat exchangercheck Verticalcheck Notified bodyTUV Heating surface100m² Tube capacity800 l Max. temperature200°C Shell capacity980 l Shell diameter814 mm Max. temperature170°C Shell connectionsDN250 Cover connectionsDN300 Information No.41038060/1 Year of construction2015 Floorspace1,7x1,7 m Total height5,8 m Weight3600 kgShell and tube heat exchangersSGL CarbonHeat exchangers > Shell and tube heat exchangersBrand > SGL Carbon What you can expect from Foeth: -- Machine is in working condition -- A ...

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power in our warehouse.

IWK TFS80-1/TZ204 tube filling line for processing tubes made of aluminium, PE, PP, PVC, PE laminate and aluminium laminate consisting of IWK TFS80-1 tube filling and closing machine for possible tube diameters 11 to 60.0 mm, total tube length from 60.0 to 285.0 mm, tube shell length (cylindrical length) from 50 to 250 mm, filling volume with corresponding dosing pumps from 1.0 to 400.0 ml, 26 tube holders, tube holder pitch 110.0 mm, tube orientation, pre- and post-gassing with nitrogen, double folding of aluminium tubes and hot air sealing for plastic tubes, Domino D Series CO2 laser coder for marking the tube fold with the variable data with DPX 1000 laser extraction system, electrical connection 3x400V/50Hz/3Ph, power 16.0 kW, machine net weight approx. 2400 kg, machine output up to 100 tubes/min., including IWK TZ 204 fully automatic tube feeder for cylindrical tubes, possible tube  ...

overhauled: 2025 Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 1800mm Table diameter ... 1600mm Max. table load ... 12000kg Max. workpiece height ... 1760mm Axis Z ... 1000mm Plunger Cut... 180x220mm powered tools ... 15 Number of positions in the tool changer ... 15 Axis C ... 360° cooling ... 20bar Main engine power ... 60kW Speed of the clamping table surface ... 2-200 rpm Speed of driven tools ... 8-3300 rpm Motor power of driven tools ... 19.5kW Machine weight ... 27200kg L x W x H ... 5700x7000x5900mm The machine is completely overhauled. More info on request. With one-year warranty.

Inv. Num. : 8852 Type: SKJ 8 CNC Producer: TOS Created: GO 2006 Parameters: Control system: MEFI CNC 859 Table diameter: 780 mm Motor power: 40 kW Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Weight: 9000 kg Equipment: Ant electric drives

Transtherm Industrial Table Cooler / Radiator for Generators – TD90W/HC – For Sale Upgrade your generator cooling capabilities with this robust Transtherm TD90W/HC table cooler, engineered for high-demand industrial applications. Designed and manufactured in the UK, this heavy-duty cooling unit delivers reliable thermal management, ensuring consistent generator performance under continuous or peak load. Any high-demand application needing reliable water-cooled radiator. This TD90W/HC unit is solidly built, reputable, and ready for immediate integration into your generator cooling system. A dependable piece of equipment from a leading UK cooling systems manufacturer. Key Specifications Manufacturer: Transtherm Cooling Industries Ltd Model: TD90W/HC Serial Number: C53911B Date of Manufacture: 13/08/14 Supply Voltage: 380–420V / 50Hz / 3-Phase Maximum Curre ...

Transtherm Industrial Table Cooler / Radiator for Generators – For Sale Boost the performance and reliability of your power generation setup with this high-quality Transtherm Cooling Industries table cooler, engineered for demanding industrial environments. Built in the UK and trusted worldwide, this unit provides efficient cooling for generator systems, ensuring stable operation even under heavy load. Any site requiring stable, heavy-duty cooling solutions This Transtherm table cooler is in solid condition and ready for integration into your generator system. A dependable, proven unit from a reputable manufacturer Key Specifications Manufacturer: Transtherm Cooling Industries Ltd Model: TD80WHA Serial Number: CE53911A Date of Manufacture: 13/08/2014 Supply Voltage: 380–420V / 50Hz / 3-Phase Maximum Current: 27 A Maximum Water Temperature: 110°C  ...

Thickness planer PANHANS type 425 510mm is optically and technically in very good condition, the machine comes from an assembly company and has been used only a little, everything is in its original condition, nothing has been repainted, the machine has only been cleaned everything works perfectly with non-return protection the planer blades can be adjusted very easily and very precisely, there are adjustment gauges that can be screwed onto the knife shaft, which ensures the highest precision the chips can be discharged very well through the closed system with 4-knife shaft for normal strip planer knives The thickness table is mounted on 2 trapezoidal spindles to prevent tipping and torsion. with protective cover that can be opened upwards max. planing width 510mm, max. planing height 250mm the machine will be delivered and demonstrated by us personally throughout Germany for ...