kuplex t used for sale

Tecon 2/218-23-4272 TCI:2218D000 G1/2 Series:12.15 Voltage 24 V Type of installation : Standing magnet Unused

Wittmann TP-PRIMUS C:90 Tempering Unit (2x) (2005)

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Collating Machine TMF N14 1990 14 Stations Collating Machine Size A3 7 Stations Collating Machine Size A2 Panel Operation and Controls double-sheet and no-sheet control Pre-set counter - Full receiving Tray + Böwe Stitcher-Folder-Trimmer combination + Transport Channel K5 + Stitcher H5 + Folder F5 + Front Edge Trimmer S5 + Delivery Module A5 available: immediately in production location: Germany

press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

PIOVAN temp controller THW118-F (2021) tempering unit 400 - V 3 - Ph 50- Hz 20 - kW 5 - KA 31 - 31 A 120 kg

Years: 1x 2012 1x 2011 1x 2010 1x 2006 2x 2008 (Is possible to buy 6 pieces)

grinding diameter:3 - 150 mm grinding length:200 mm total power requirement:380V, 50Hz, 30 kW dimensions of the machine ca.:5 x 3 x 2,5 m

x-travel: 1250 mm mm y-travel: 1000 mm mm z-travel: 600 mm mm Control: total power requirement: 25 Kw kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 3300 mm turning height: 1900 mm workpiece weight: 15000 kg vertical adjustment of the crossrail: 1600 mm turning speed range - faceplate: 1 - 90 U/min main drive motor: 60 kW ram head swiveling: +/- 35 ° ram head - cross travel: 1200 mm ram head - vertical travel: 720 mm feed range: 1 - 4000 mm/min Control: total power requirement: ca 70 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 4,8 x 4,8 x 5 m Complete overhaul in 2025 - CNC FANUC 0i-TF - 1 ram on crossbeam - 4 clamping jaws for face plate - CE -- mechanical overhaul of all components (adjustment of the geometrical parameters of the machine according to ISO 3655) -- Grinding of the guides -- New telescopic covers -- FANUC main motor -- new electrics and CNC control -- new Fanuc servomotors -- ball screws dia. 50mm -- new hydraulics the machine image is an example imag ...

length in total:3000 mm weight of the machine ca.:600 kg dimensions of the machine ca.:5150 x 900 x 1250 mm

POLAR 137 ED AT 2000 Autotrim Program Air tables Polar lift Jogger RA Transomat

turning diameter over bed:930 mm turning diameter over slide rest:630 mm turning length:6000 mm turning dia. in gap:1250 mm spindle bore:95 mm turning speed range:8 - 800 U/min total power requirement:25 kW dimensions of the machine ca.:9 x 2 x 1,9 m faceplate 2 steadies coolant attachment taper turning attachment

workstation with dust exhauster

Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667

spindle diameter: 150 mm x-travel: 9500 mm y-travel: 2500 mm Control: Siemens type: 840 C ram: horizontal adjustment: 700 mm spindle travel: mm dimension of the ram: 400x400 mm Plate area: mm rotary table:: Table load: 25000 kg table travel: 2500 mm Table area: 2000x2500 mm angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

WE OFFER AN VERY NICE CONDITION TRUMATIC 5000R PUNCHING MACHINE WITH COMPLETE AUTOMATION 24000 WORKING HOURS ONLY MACHINE WILL BE AWAILIBLE IMEDIATELY

used fat baking appliance Treif Pegasus, overhauled, 50 Hz, 400 V, 0.9 kW, control system has been renewed, completely in stainless steel version, weight: 168 kg

Transnorm conveyor belt GF 2630-700-600 RA2242 Technical data: Conveyor length (NL): 2630 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): currently 1.36, subject to change Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2630 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW ...

We are currently offering for sale an almost new 50 kW CHP plant from Tuxhorn. Specifications: - Model: E50SW (Natural Gas Version) - Year of Manufacture : 2022 - Commissioning Date: February 2023 - Operating Hours (BH): 45 - Number of Starts: 59 Special Features: - Equipped with a second exhaust gas SD, reducing exhaust noise to as low as 35 dB(A) for quieter operation. Condition: - Excellent: The unit is in like-new condition with minimal usage. Applications: - Ideal for industrial or commercial operations requiring reliable and efficient combined heat and power. Find more here - / Contact us at -

Transnorm conveyor belt GF 1000-700-600 RA2058 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R17 DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...

Transnorm conveyor belt GF 1700-700-600 RA2059 Technical data: Conveyor length (NL): 1700 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,92 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1700 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,92 scope of d ...

length: 3000 mm width: 100 mm height: 260 mm The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 KW

After E70 about 4000h only walked. If you are interested, please contact us via WhatsApp at 004915229184328.

Transnorm roller curve conveyor right 180°-770-700 IR 800 RA2350 Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 0.1 to 1.0 m/s Weight: 210 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Kette Construction year: 1994 condition: gut Nominal / inner radius in mm: 800 Nominal / outside width in mm: 770 Roll width in mm: 700 angle: 180° Driven: YES scope of delivery: without s ...

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

Manufacturer: Telestack Model: TS 1042 Task: - Material: Wood chips - Max. Feed Piece Size: 0-80 mm, max. 100 mm - Max. Bulk Density: Approx. 0.4 t/m³, max. 0.5 t/m³ - Average Capacity: Approx. 225 t/h, max. 250 t/h - Moisture Content: 20% - Description of Use: Stockpiling of wood chips in storage boxes Technical Specifications: - Receiving Box: Designed for material transfer from screening, crushing, or belt systems - Pick-up Height: Approx. 3,000 mm (depends on the conveying angle) - Max. Feed Grain: 100 mm - Height Adjustment: Hydraulic height adjustment and telescopic device from the control panel - Belt Length: Up to approx. 42,720 mm - Max. Discharge Height: Up to approx. 14,520 mm - Belt Specifications: - Smooth belt, 1050 mm wide - Three-layer EP400 4:2 Electric Drive System: - Main Belt: 18.5 KW - Telescopic Belt: 2 x 5.5 KW - Telescopic Drive: 1.1 KW - Electro-hydrauli ...

Bread slicer/continuous machine/industrial version/creel machine Disc thickness 12mm possible product size width max 520 mm, height 140mm with lubrication with inlet belt Output approx. 30 loaves/min with material pusher

Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN

The output of the bagging machines varies from 300 – 400 bags/hour. The year yes 2020 uppersilo and weighing unit all performed in stainless steel Roboter und Palettierer 16kg-25 kg Sack Pneumatically actuated bag holders

Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle

Key data: 500 mm, 8

MACHINE CNC .

Screen Truepress 344N with Trueflow RIP and Trueflow imposition, using processless plates, Tehnotrans cooling and circulating system with automix, ca. 6 mio. impressions. In very good technical condition, under power in the printshop.

Schneider stream delivery tables. standard and extended. Both in production ready condition, for envelope delivery, etc.

degree: 0 working heigth: mm length: mm width: mm depth: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MBO T530 folding machine with stand up feeding with the following units: 1. MBO T 530 -1 53/4-R 2. MBO T530 -2- 53/4 3. MBO stream delivery table The machine is in production ready condition, with a huge amount of serial equipment such as guides, perforation wheels, etc. Available immediately, can ship worldwide.

Key data: 350 mm, 100 mm

Automatic with power gearbox also for high-alloy materials.

heavy gear, for interrupted cutting Cutting height 125 mm Cutting length 400 mm Mitre right + left by 60°

8008 CM Art. item / Anno/Year: 06-01/90, Hz 50, 380 V, 100 KVA 50%, 250 KVA, 8200 Amp 100%, 36000 Amp short circuit, 710 da N pressure, 300 l/h H2O Water Cooling - Made in Italy The spot welding machine was used weekly about 10 years ago and was fully operational at that time. The machine can be connected at any time and can be checked by qualified personnel by the potential buyer with the product to be manufactured in the future. The machine can be picked up at the current location – as it stands – without warranty and other services for 2800.00€ VHB or shipped plus shipping costs. Alternatively, we can have the machine checked by external specialists, in which case the price is approx. 4500,00€.

Manufacturer: TEDOM Model: FLEXI 250 Year of Manufacture: 2022 Type of Machine: Combined heat and power plant (CHP) Primary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 3.5 bar - Max. Permissible Temperature: 95°C - Category: II - Nominal Size: 100 - Fluid: Water-Ethylene Glycol - Volume: 350 L Secondary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 10 bar - Max. Permissible Temperature: 90°C - Category: Article 4, Section 3 - Nominal Size: 80 - Fluid: Water-Propylene Glycol - Volume: 56 L Reversible heat pump Manufacturer: Mitsubishi Model: NX2-N-G06 /A /0606 Type: Reversible, air-cooled heat pump Function: Heating and cooling Power Supply: 400V / 3-phase / 50Hz Find more here - / Contact us at -

faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 1750 mm slide adjustment: 1000 mm table load: 18 t turning speeds: 43,7 U/min Control: Siemens type: 840 D mm Rest: 2 chip conveyor: ram head dimension: 250x250 mm live tooling: 36 kw total power requirement: 85 KVA weight of the machine ca.: 64 t dimensions of the machine ca.: 8x5,8x8 m The machine is currently designed to machine rings, but can be converted again for machining large parts. The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the machine prior to the sale, our terms and conditions of sale apply exclusively. About us More than 400 own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then c ...

max. format 72 x 106 cm Built in 1967 automatic punching cylinder Letterpress cylinder converted to a punching cylinder Stack Feeder Shed Feeder Stack delivery Delivery date: immediately Price on request. We deliver and install worldwide!

Folding machine Make MBO Model T400X Year 1998 Maximum size 420 x 630 mm Configuration Feeder Flatpile feeder 1st station 4 plate buckles 420 mm 2nd station knife fold Delivery belt delivery Details with batch counter, noise hoods, vacuum pump, HSS glue computer only Available direct

We are offering for sale a Chamber belt system with shrink tank. LikeNEW! Barey used CHAMBER BELT VACUUM MACHINE Model: Conveyor Pro 1065 Packable Products - Meat - Sausages - Cheese - Fish - Fruits - Vegetables - Ready meals - Mechanical components - Electronic components Technical Data - Structure: Stainless Steel AISI 304 - Control Panel: 7" PLC Touchscreen - Dimensions (L×W×H): 2741×1237×1645 mm - Weight: 900 kg - Inner Vacuum Chamber Size: 1110×840 mm - Usable Lid Height: 250 mm (Optional: 150-200-320 mm) - Sealing Bars: 1 or 2 × 1000 mm - Distance Between Sealing Bars: 670 mm - Sealing Type: Monoseal or bi-active, double seal or wide sealing - Conveyor Belt Speed: Variable, up to 40 m/min - Vacuum Pump: 1 or 2 × 300 m³/h (7.5-15 KW) + Booster 500 or 1000 m³/h (5.5 KW) - Final Vacuum Degree: 1 mbar absolute - Power Supply: 400V - 3PH + N + PE - 50Hz - 3KW (without pum ...

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3466 Löffler TB800-CNC3 year/Year of construction 1994 Bridge saw with Pellegrini rotary table and roller tilting table Bridge saw with Pellegrini turntable and roller tilting table