kuhne mm used for sale

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SECOND-HAND MUTILPLE HORIZONTAL MORTISER COMEC MOD. MMS/15-2000-CA - Automatic loader - Max. working length mm. 2000 - No. 7 spindles - Volt 380/50 - S/N 970406 - CE rules (year 1997)

BORING MACHINE Good condition Table dimensions 1300 x 1100 mm X axis 3100 mm Y axis 2000 mm Z axis 2200 mm W axis (bore tube) 600 mm Axis B (rotary table) continuous Horizontal spindle Tool change 30 seats Spindle revolutions 20 - 3000 rpm Spindle power 27 Kw Spindle cone ISO 50

First installation year 2010 - Bar capacity 52 mm - The machine has always worked with oil - Equipped with Lns Sprint S2 barfeed, front magazine type, and a lot of accessories (for both lathe / barfeed) - Fanuc 31i-A Control.

Vertical machining center FAMUP MMV 160 CNC Fanuc CNC Fanuc 18i Table 2000x600 X 1600 Y 600 Z 600 Quick: Z 30 m / min X, Y 20 m / min Spindle 10000 rpm ISO 40 13.5kW max 30 tools high pressure Weight: 8200 kgs The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 1600, Y axis: 600, Z axis: 600, CNC type: Fanuc 18i, Spindle speed RPM: 10000

x-travel: 660 mm y-travel: 510 mm z-travel: 560 mm CNC-control: Sinumerik 810 D ShopMill SIEMENS table-size: 900 x 485 mm max. table load: 450 kg spindle taper: SK 40 spindle turning speed range: 8.000 U/min feed stepless: 1 - 10.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 9,25 kW tool change unit: 20 Pos. coolant: chip conveyor: Spiralförderer voltage: 380 V total power requirement: 11,0 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,20 x 2,75 x 2,50 m - Serial-No.: 07010128 - control: Sinumerik 810 D ShopMill - electrical hand wheel - chip conveyor - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 999999 mm y-travel: 999999 mm z-travel: 999999 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Im Kundenauftrag: Die Maschine wurde 2015 von uns aus einem Vorführraum der Fa. Mahr gekauft und ist Baujahr 2013. Das Meßgerät war bei uns so gut wie nicht im Einsatz (deswegen auch keine aktuelle Kalibrierung) da das fertigungsbegleitende Messen zu aufwendig war. Die Hardware der Maschine ist in einem neuwertigen Zustand. Die Software arbeitet einwandfrei (Windows 7). Ein kompletter Tastersatz, sowie ein neuer Default-Taster ist mit dabei. Die Maschine arbeitet vollautomatisch. Man kann alle Form- und Lagetoleranzen sowie Konturen messen. Die Maschine steht auf einer aktiv schwingungsisolierten (Druckluftdämpfung) Granitplatte. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motors available -Price: per piece -Dimensions: 540/200/H250 mm -Weight: 50 kg/piece

Minimum quantity lubrication, coolant lubrication device, cooling spray device, oil spray device -pneumatic: driven -Tripping: electrical -Oilcontainer -Dimensions: 200/230/H375 mm -Weight: 2 kg

Gear motor, electric motor, electric gear motor -Manufacturer: CEG, geared motor -Speed speed: approx. 100 rpm -Engine: CEG type MM63B4-STDT -Power: 0.22 kW / 1200 rpm -Hollow shaft: Ø 18 x 65 mm -Design: B14 angle -Protection rating: IP 55 -Quantity: 3x motors available -Dimensions: 320/170/H170 mm -Weight: 7.1 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 44.46 -Drive motor: with frequency converter MM03D-503-00 -Speed: 31 - 6.3 rpm -Power: 0.37/0.075 kW -Shaft: Ø 25 x 50 mm on both sides -Protection rating: IP54 -Quantity: 1x geared motor available -Price per piece -Dimensions: 470/290/H210 mm -Weight: 26kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 106.38 -Drive motor: with frequency converter MM03D-503-00 -Speed: 13 - 2.6 rpm -Power: 0.37/0.075 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 490/290/H190 mm -Weight: 26 kg/pc.

PLC control, central assembly, RAM, CPU, central device, positioning assembly -Manufacturer: pilz, positioning assembly 6 axes -Type: P10-MMC6 304518 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.1 kg/pc.

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Lube central lubrication unit: MMX-W -Motor: 100 V/0.01 kW -Dimensions: 280/190/H230 mm -Weight: 9.3 kg

Sensor-actuator distributor, distributor strip -Type: SAI-8-MMS 4P M12 -8-way: distributor -Weight: 800 g

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: CSM -Pump type: -Digital clock: Type SPG-DIGI-B0400-B -Power: 0.55 kW 1360 rpm -Dimensions: 550/360/H380 mm -Weight: 34 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø mm -Number: 1x motors available -Price: per piece -Dimensions: 670/206/H245 mm -Weight: 51 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motors available -Price: per piece -Dimensions: 670/206/H245 mm -Weight: 50 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor, Permanent Magnet DC Servo Motor -Max. Speed: 2000 rpm -Shaft: Ø mm -Number: 1x motors available -Price: per piece -Dimensions: 685/142/H190 mm -Weight: 31 kg/piece

Gear motor, electric motor -with integrated frequency converter 0.37kW -Speed: 60 rpm -Power: 0.55kW -Construction: B3 angle -Diameter shaft: O 20 mm -Brake -Protection class: IP 54 -Dimensions: 380/160/H240 mm -Weight: 13.5kg

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 1,0 x 2,5 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SAF37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 105 mm on both sides -Protection rating: IP54 -Dimensions: 470/290/H210 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 360/250/H190 mm -Weight: 14.0 kg

DEA ALPHA STATUS COORDINATE MEASURING MACHINE New in 2008 Manufacturer Hexagon Metrology S.p.A. Type Gantry CMM Measuring Range (X/Y/Z) 5.000/2.500/1.500 mm. Measuring Head RENISHAW PH 10

Geared motor, electric motor, electric geared motor, spur geared motor, frequency-controlled geared motor, adjustable geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, adjustable geared motor -Type RF07 DRS71S4/MM03 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 25 to 280 rpm / i= 11.18 -Power: 0.37/0.074 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 360/250/H180 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, electric geared motor without gearbox -Type SA37 DRS71S4/MM07 -Drive motor: with frequency converter MM07D-503-00 -Motor speed 2900/597 rpm -Power: 0.55/0.055 kW -Shaft: Ø 10 -14 mm, spur gear see photos -Protection rating: IP54 -Dimensions: 240/186/H245 mm -Weight: 8.4 kg

Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake, frequency-controlled geared motor, adjustable geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, adjustable geared motor with brake -Type R17 DT71D4/BMG/MM05 -Drive motor: with Movimod frequency converter -Speed: 290-64 rpm / i= 4.51 -Power: 0.055/0.55 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Brake: 5 Nm -Quantity: 4x motor available -Price per piece -Dimensions: 430/145/H200 mm -Weight: 15 kg

Nakamura Take WT 300 MMY. 2 turrets. 2 twin heads. 9-axis controlled turning and milling center. Facing headstock machine. Upper turret with Y axis with +- 60 mm. Lower turret with C-axis driven tools. Both turrets with 12 stations each and all of them motorized. Possibility of setting with 24 tools in each turret. Motor power of both heads 15 Kw. Power of milling motors 5,5 Kw. Speed of both heads 4.000 rpm. Speed of motorized tools 5.000 rpm. Bars loader of 1,5 meters. Interface for any brand and model of loader. Front bucket type parts collector installed in the door. Rear parts collector gantry robot type with 3 Kg. capacity clamp. Cutting power 320 N/M. Distance between heads 980 mm. MQ system for tool clamping. Main spindle bar pitch 70 mm. Size of heads A2-6. Rapid traverse speed 25 m/min in X and Z axes. Indexing time for turret chan ...

swivelling range: 250 mm max. working diameter: 210 mm max. working lenght: 555 mm control: Fanuc 18i TB spindle taper: JIS A2-6 spindle diameter: 71 mm number of spindle speeds: 5.000 U/min CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with bar loader (Profimat) Equipment/accessories: - Bar loader - driven tool holders Further technical data: - Chuck size: Hainbuch collets - Distance between spindle end faces: 555 mm - Max. outside diameter for bar material: 65 mm - Spindle power 1 = 11 / 15 kW - Spindle power 2 = 7.5 / 11 kW - Max. torque: Nm 265 (kgf-m 27) The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: KRÖGER Greifertechnik Designation: Motor peel grab Type: 500 MMGM Year of construction: 2019 Capacity: 1 to. or 1 cbm Closing time: 7 sec. Opening time: 4 sec. Operating hours: approx. 2 h Weight: approx. 1,050 kg SPECIFIC COMMENT - As good as new

Key data: 1100 mm, 585 mm, 600 mm

Control Siemens 828D Shop Mill Travel X/Y/Z 1100/585/600mm Speed 8000rpm Tool magazine for 30 tools SK40 Coolant through the spindle High pressure / Air through the spindle Spindle Oil Cooler Conveyor 3D probe system M&H IRP 25.41 Electric. Handwheel

Fanuc CNC model Version of the CNC 18i - MB ISO 40 tool holder Spindle power 12.5 Kw Number of spindle revolutions 10000 Number of tools 30 X Axis Travel 1600 mm Y Axis travel 600 mm Z Axis travel 600 mm Linear axis rapid feeds X Y Z 30 m/min Table dimensions 2000 x 600 mm Table capacity 2000 kg Roller guides High refrigerant pressure yes Belt chip conveyor Presetting yes Working hours 11,000 MACHINE EQUIPMENT Spindle overhauled by SMZ in November 2016 New X-axis bellows shutters (PEI) November 2016 Replacement of the Z-axis motor May 2021 Marpos tool probe Kit of 4 skates for axis guards

The belt mixer is a dynamic product mixing system. It is based on a container or vat that houses inside a tree with spirals specially made to achieve a uniform mixture of the materials that are introduced into the vat. The mixer is driven by an electric motor and a direct transmission mechanism from the reducer. The mixers have an orthogonal or worm gear reducer. The shaft is solid stainless steel and the blades are made of plate, also in stainless steel. For its part, the tank and the shaft are in a mirror polished finish. The mixer has a product intake mouth, a central material outlet and an inspection window. Finally, the opening of doors is regulated with magnetic detectors. In processes where it is required to mix a considerable amount of material, the installation of this type of mixers is essential. MMG mixers are available in a wide range of models to cover the needs of all our c ...

Mecal MC 305 KOSMOS type TM MMI 4-axis CNC machining center for the processing of aluminum and light iron profiles. Equipped with 5 vices with automatic positioning, 2 angular heads for machining the heads positioned on a special tool changer, 8 tools positioned in the magazine with automatic UT change. Strokes mm X 4500, Y 500, Z 400. Spindle revolutions 18,000 with automatic oil spray lubrication. Year 2015. Used very little, to be seen on site. supplied with 8 chucks + 2 angular heads, see photo.

Useful capacity of the product tank: 50 liters Total capacity up to the edge of the tank: 80 liters Operating overpressure in the product tank: -1/+2.0 bar Maximum temperature in the product tank: 125 °C Operating overpressure in the double envelope: 4.0 bar Maximum temperature in the double envelope: 140 °C Stainless steel: 1.4435 1350 kg Variable speed of motors: Outer arm mixer: 11-44 rpm Inner arm mixer: 21-84 rpm Homogenizer: 1150-4350 rpm, Volume: 80 liters , Useful volume: 50 liters , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 liters , Double envelope pressure: 4.0 bar , Weight (kg): 1350

spindle passage: H: 65 / G: 51 mm numbers of positions in the tool changer: 2x12 control: FANUC 18i-T tool taper: BMT55 collet chuck: Hainbuch (RD65) CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1320 mm, 700 mm, 700 mm

From a current recycling, we can provide you with a gebr. BAZ. See pictures for details Sold without warranty in the condition shown in the pictures.

This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information.

CAST FILM EXTRUSION LINE SML winding unit This production line was professionally dismantled in 2017 Designed for COEX- cast foil production. Processing of thermo plastics in a temperature range of 150-300°C. The system can be operated with the following combinations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output max. 900 kg / h Main extruder: 105/33 L / D max. 650kg / h Extruder CO .: 90/33 L / D max. 250kg / h Foil width NET: 800-1400 mm Thickness: 25-530 µm Production speed 8-150m/min Roller width: 1600 mm Max. Roll weight: 2000 kg Version with Airnife and vacuum box One gravimetric dosing device with 3 stations per extruder Each extruder is equipped with a melt pump and a 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-cont ...

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Articulated arm drilling and tapping machine make KÜHNE GEFIX type P team machineYear of construction 1989Technical specifications:Thread sizes: M 0.8 - M 6Adjustable torque range: 0.1 - 2.5 NmStepless speed: 1000 - 3000 rpm.Spindle stroke: 85 mmDrive: Syncron servomotorPower connection: 220 V / 50 HzWith- Cross jointed arm Gefix type P- Micro sprayer- Cast iron plate 1000 x 1200 x 120/60 mm- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Key data: 75 mm, 24

Blown film extruder for mono films TOP version Manufacturer Alpine BJ 1989 has already been partially modernized. Screw length 24d Screw diameter 75mm Blowing head BF 14-36 internal cooling from Alpine Cooling ring HK 300 with peak Output approx. 175 kg depending on the product Film thickness 12my – 50my Dosing Dosing unit with 4 volumetric feeders Winder Kuhne 1300mm Tandem Pre-treatment available 1 time Slotting device is available Flat laying 840mm – 1200mm Thickness measurement is available

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

ManufacturerAngelType ES 80-25 HLS CC 100ControlCC 100Year of construction1997Closing unitClosing force t25Opening path mm330Installation height min/max mm150 /plate size280 x 470Injection unitScrew diameter mm22spray volume cm338Spray weight gr34spray pressure bar1500Dimensions and weightsMachine weight Kg1800Other

technical data: Purpose: Gate drive Dimensions: 85 mm (shaft) x2500 mm long Accessories: 3 bearings SNH 522 Pulley: 1 pc. 750 mmx260 mm/ 1 pc. 1060 mm x200 mm

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²