kuhn used for sale

Ground precision ball screw, D40 mm, 1200 mm, Kuhn, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Ke.Nr. 16000855, Sp.Nr. 5830, D40, 1200 mm, Fa. Kuhn Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1015 mm Length of ball screw nut 70 mm, Max. total stroke 945 mm, Total length of the spindle 1200 mm Diameter for coupling with motor 20 mm Diameter bearing seat A 25 mm, Diameter bearing seat B 30 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you  ...

Ground precision ball screw, D63mm, 1730mm, Kuhn, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Ke.Nr. 14000988, Sp.Nr. 2471+17, D63, 1730 mm, Fa. Kuhn Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 1455 mm Length of ball screw nut 143 mm, Max. total stroke 1312 mm, Total length of the spindle 1730 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 45 mm, Diameter bearing seat B 45 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give y ...

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

Deze extruder lijn van Kuhne staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 2008 en verkeerd in prima staat. Merk: Kuhne GmbH Model: K 60E - 33D Typen schroef: enkelschroef Bouwjaar: 2008 Schroef Ø: 600mm L/D-verhouding: 33 Hoogte cyclinder: 425 mm Bls Ud Dou Etygevycep Kegelhoogte: 325 mm Total height: 750 mm

This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information.

Kuhse control cabinet for CHP incl. breaker 800A

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

PLC control, digital output -Manufacturer: KUHNKE -Type: 653.000.43 -Quantity: 1x power supply unit included -Dimensions: 260/135/H235 mm -Weight: 3.2 kg

For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!

Manufacturer: Kuhnke Steuerung, FREE TEXT: mit CPU Karte, Free text 1: mit RAM Karte, Free text 2: inkl Einsteckmodule,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Type: Schleifmaschine,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Control: CECC 75101-801-C064MS-G1A-3G, Serial number: B5282-B1300-G963, Axis card: 140.642.01,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.69,

Hersteller : Kuhnke Siemens Streckenkarte, Spare part from machine: Heesemann, Type: PC 612, Control: B5282-B1300-C963, Serial number: CECC 75101-801-C064MS-C1A-3G, Axis card: 657.452.69,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: Siemens PC 612 C B5282-B1300-C963,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Type: Siemens PC 612 B5282-B1300-C963, Control: 657.452.69, Serial number: CECC 75101-801-C064MS-C1A-3G,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Kuhnke Steuerung, Type: KUAX 653,

Manufacturer: Kuhnke, Type: KUAX 653, war verbaut inMaschine: Heesemann KSA, Standort: Lahde,

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Find more here - / Contact us at -

A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible.

Centering Machine - KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering Length - Endless -Clamping unit with self-centering vice -Spindle drive 1.8 KW -Drill chuck -Chip tray -Connection cable -Forklift insertion for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg

Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. ...

Belt/ozilierend swiveling Roll in the table

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps

Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

Timing relay, reverse power monitor, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KPW 20 5/1A 400V -Price: per piece -Number: 4x available -Weight: 0.7 kg

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,

throat: ca. 300 mm stroke: ca. 200 mm pressure capacity max.: 35 t die cushion hydr. pressure/stroke: 15 t total power requirement: 5,6 kW weight of the machine ca.: ca 2,5 t dimensions of the machine ca.: 1 x 0,9 x H 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kuhn GA 13231 Giro rake – 4 rotors – built in 2023 – very good condition Powerful 4-rotor gyro gyro rake for professional applications Year of manufacture 2023, model year 2024 Working width approx. 12–13 m 4 rotors for high area output and uniform swath placement Technical data: Drive speed: 750 rpm Tyres: 600/50-22.5 R Wheel dimension: 16x6.5-8 Road legal: 40 km/h Air brake system available ISOBUS control (without terminal) Technology: Uniform swath placement High area performance Robust Kuhn construction Condition: Very well maintained Low usage Ready to use Auction-ID: A7-46606-1015

Kuhn RM 610 R Mulcher – 6.1 m – Year 2024 – New machine High-performance large area mulcher for professional applications Year of Build 2024, New Machine Technical data: Working width: approx. 6.1 m Transport width: approx. 2.5 m Power requirement: approx. 180 – 350 hp Rotor diameter: 630 mm Number of mallets: 68 hammer mallets Back-up roller: Ø 220 mm Machine weight: approx. 3,200 kg Equipment: Hydraulically foldable side panels Robust flail rotor Large-dimensioned trailing roller Three-point hitch Protective flaps and safety devices Kuhn Heavy-Duty Construction Technology & Application: Uniform mulch pattern even with high growth High area performance due to large working width Auction-ID: A7-46606-1017

Kuhn Pro-Longer GII 7483 TP – Embankment mower – Year 2023 – Exhibition machine Professional boom mulcher for slope and ditch maintenance Year of manufacture 2023, exhibition machine in very good condition Ideal for municipal companies, contractors and large companies Technical data: Horizontal reach: approx. 5.7 m (extended to 7.4 m) Mowing head width: approx. 1.2 m Drive: ECO-Drive 800 rpm Power mower head: approx. 67 kW / 83 hp Rotor speed: for intensive shredding Hydraulic system: approx. 80 l oil volume Machine weight: approx. 2,130 kg Transport height: approx. 3.78 m Equipment: Wood shredder with 16 hammer flails XTREM Back-up Roller (Ø 140 mm) Adjustable protective cover VT31 operator terminal with touchscreen Collision protection Boom kinematics (Z-kinematics / circular motion) Telescopic arm (1.5 m extension) Closed rotor hydraulics Technology & Application: For tractors ...

Kuhn RW 1410 C Bale Wrapper – Year 2022 – Model Year 2023 – Exhibition Machine High-quality round bale wrapper for professional applications Year of manufacture 2022, Model year 2023 Exhibition machine in very good condition Technical data: Machine weight: approx. 850 kg Bale weight: up to approx. 1,100 kg Category: Trailed Round Bale Wrapper Hydraulic drive Equipment: Self-loading arm for bale pick-up Bale Placement Bale counter Lighting system Film pre-stretcher / wrapping unit Stable transport axle Technology & Application: Fast and uniform wrapping of round bales Suitable for silage and hay bales Easy operation via tractor hydraulics High efficiency in the field Condition: Exhibition Machine Auction-ID: A7-46606-1018

KUHN HR 4504 DR rotary harrow from 2019 with a working width of 4.50 m, ideal for intensive soil preparation. Equipped with an integrated Farmflex roller ensuring optimal consolidation and excellent soil finishing. Robust machine with 15 rotors and 30 reinforced 32 cm tines for efficient work even in difficult conditions. Rear hitch and transmission 1000 rpm, material in good general condition with normal wear and tear. Ideal for operations looking for performance, reliability and high efficiency. Auction-ID: A3-43539-38082

For DMG HSC 75

Machine that was used for demonstrations Auction-ID: A3-43534-35522

With middle deposit, equipped with swath cloth. Auction-ID: A1-40139-226

Auction-ID: A1-46943-9

Auction-ID: A3-43539-5000

Auction-ID: A3-43539-11014

Auction-ID: A1-40140-137