kuchler sam used for sale

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. Processing of the cable pages at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are is carried out in the two-blade system either both knife independently to adjust continuous or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

Toothed sticking knife for packing machine. 10 pieces approx. 260 mm long handle recording according to drawing or sample. Please separately request.

Blades for industry (sewing machine spare parts) Cutting blades Stitch cutter Circular blades, upper knife Sewing machine parts According to drawing or sample. Price on request.

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

The BV tests are intended for the detection of biological substances, including botulinum neurotoxins A, B, E and F, staphylococcus enterotoxina A and B, ricin and anthrax spores. BV tests use a sandwich immunoassay format. An anticoerper specific to the pathogen to be measured is immobilized on microparticles. The other anticoacher is labeled with BioVeris' BV-TAGTM label. The sample is mixed with these reagents. When the specific pathogen to be measured is present in the sample, both anticoerpers bind to it and effectively connect the microparticles, the organism and the BV-TAG marker. The reaction mixture is then transported with an assay buffer to a flow cell with an electrode that stimulates the bound BV-TAG label to emit light. Only BV tests provide this unprecedented sensitivity and accuracy. BioVeris M1M Analyzer Incl. Toughbook Panasonic Mod. CF-29HTP44BM Kunstoff Tra ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...

Hünnebeck BOSTA 70 facade scaffolding Hünnebeck BOSTA 100 Masons scaffolding / scaffolding of clinker Available in various designs, sizes and quantities. The photos are sample photos, the inventory changes daily. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. -> Note also our other ads <-we can give you several thousand square metres used scaffolding (E.g. by Layher, Plettac, Rux and Hünnebeck and compatible) offer - ask us!

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

Work area: 1.5 x 3 m or 2 x 4 m Standard equipment: self-focusing cutter 2 kW laser cooling unit, astringent and purifying air system, security, automatic twin transfer table, CAD/CAM software (Metalix, Lantek, Almacam) control unit with 15 "-touch screen, conveyor belt, warning light, nozzle set All CAD/CAM programs such as Lantek, Metalix and Almacam are usable. Options: Linear drive technology, laser light source optionally available with 3, 4 or 6 KW Sampling device, safety light barrier, air conditioning for automation Panel. 24 months warranty The price refers to a 1.5 x 3 m facility with 2 KW

Aboveground, double-walled stainless steel tanks used according to DIN 6616/2 for the storage of liquid fertilizer ASL/AHL - emptied, cleaned- incl. 2 saddle feet, 1 DOM, 1 leak detector-test report Size: 50.000 litres Diameter: 2,500 mm Length: 10,700 mm Weight: 9,200 kg The tank has a brand new, suitable for liquid fertilizer (ASL/AHL) plastic inner sleeve. This plastic sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL/ASL, as well as NOx reduction agent AUS 32 (AdBlue). Also, we can provide the container with an internal coating of epoxy resin. This coating is also approved for liquid fertilizer (ASL/AHL). In addition, the container if necessary is outside completely sand-blasted, primed and then painted in an any RAL color. The container can be equipped additionally w ...

Bearing platform 8,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions floor area: 8,000 x 5,000 mm Floor area: approx. 40 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: Ok minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 Mounting angle 3 Cross Associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, red, fire Ral 5003, sapphire blue (Other colors on request!) Main and cross beams galvani ...

Bearing platform 12,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions floor area: 12,000 x 5,000 mm Floor area: approx. 60 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 8 stand, one side 100 x 100 x 3 mm 6 main beam C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross member S+300 x 2 mm, L = 4,800 mm (closed) 26 Mounting angle 3 Cross Associations 24 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000 fire red Ral 5003 sapphire blue (other colors on request) Main and cross bea ...

1 pc. stainless steel tank with large inspection flap and 3 sampling points, staplerfaehig and stackable additional staplerfaehiger catcher in stainless steel (not pictured) Fasungsvermoegen 1,000 litres Operating pressure 0.1 bar For hazardous substances of class 3 6.1 b and Weight Tank 212 kg Collecting pan approx. 240kg Special price

Bearing platform 16,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions floor area max.: 16,000 x 5,000 mm Floor area: approx. 80 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 10 stand, one side 100 x 100 x 3 mm 8 main beam C+300 x 3 mm, L = 3,990 mm 18 cross member S+300 x 2 mm, L = 4,800 mm 36 Mounting angle 4 Cross Associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000, red, fire Ral 5003 sapphire blue (other colors on request) Main and cross beams galvanized  ...

Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...

They are offered from a working measuring machine Electronic components and Heidenhain External impulse formers All prices VB or against bid 1st 1St Renishaw Autochange Control Unit ACC2-2 Closing at the back: Pics in ; Pics out ; RS232 ; CMM ; Rack Price 890.-EUR 2. 1 Pcck Renishaw Probe Head Controller PHC 10 Serial K14908 Connection at the back: output ; IEEE ; RS232 ; Head ; PHD10 Price 490.-EUR 3. 1 Pcs Renishaw Sample Interface Price 490.-EUR 4. 3 Stueck Heidenhain External Pulse Converter Electronics (Measured value converter) EXE 610 C with manual Price 190.-EUR / Stck Special price

Two-roller gluing machine for the processing of cold glues. Same glue application by changing the distance between the two rollers to each other. width 350 mm. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Storage Tank/ Wine Tank in V2A Volume: 4.000 litre used - in very good condition Measurement and Weight: Total Height: 3650 mm Cyl. Height: 2700 mm Diameter: 1300 mm Weight: kg Material: V2A - AISI 304, 1.4301 Surface marbled outside Upper body: with torispherical bottoms 1 x thread connection DN 50 central Cylinder tank: 1 x ladder hook 1 x manhole 400 x 300 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve 1 x level indicator with bar and scale 1 x clap 1 x thread connection DN 50 side with blind cap Lower bottom: with torispherical bottoms 1 x forwards pulled rest outlet with butterfly valve DN 50 4 x calotte feet height adjustable

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2  ...

Complete range of well-preserved stamps and dies in the same number and diameter as in the brochure shown.

Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW

6-Achsenmessgelenkarmsystem Manufacturer: Zett-mess Type of machine: AMPG - 36 p Year of construction: 2003 2 same facilities are available. The price is for a plant. All information without guarantee

Storage tanks outside marbled for wine, water, fruit juice, schnapps 1.000 liters NEW! Measurement und weight: Diameter: 920 mm Total height: 2150 mm Cylinder height: 1500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 3.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

- 1 x Onyx type 6252 inserting machine Sn. 35226-2 - 1 x main product shuttle feeder typ 289.0400 (signature feeder) - 1 x opening station - 3 x insert feeders - 1 x 'special product' feeder (eg. pen, CD, cosmetic samples etc inserts) - 1 x Safir typ 6270 filmwrapping machine (individual wrapper) Sn. 35226-1 - conveyors

Lawn Sweeper for PTO 540 rpm, working width 180 cm, double Sweeper roller system, hydraulic high dump, electrical. Remote control acting on solenoid valves, ew 1 hydraulic connection required. Tank contents approx. 3 m ³, rear axle 6 x frosted. Drawbar adjustable in height, illumination device com. StVZO. Machine is relatively little used, brushes and Tin in good condition with paint defects inside the tank and signs of use. Incl. operating instructions, parts list, and ABE. Type same Kugelmann KDH 150 (150 cm working width) also available and more with working widths from 90 to 170 cm. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 5.100 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3357 mm Cylinder height: 2500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

FOR SALE... NEW GENUINE PARTS OF CAT 3512D & CAT 3406 CAT 3306 TO WHOM IT MAY CONCERN; WE VE LISTED NEW GENUINE SPARE PARTS OF CAT 3512D / CAT 3406 CAT 3306 AT OUR STOCK PLS REFER LIST OF PARTS ON PICTURES AND SOME SAMPLE PICTYRES OF PARTS ON ATTACHá IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Best of Regards; Aliaga Marine Services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Storage tanks outside marbled for wine, water, fruit juice, schnapps 6.150 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Description Brand GPG TECHNICAS DE PANIFICACION SL Model GFH-60 ID TR296 Status Active Price 1.300 € + VAT Year of manufacture 2009 Fuel Altele Location Oradea (RO) Gas heat generator for baking ovens GPG GFH-60, 2009, designed for STATIC furnaces from the same manufacturer. Heat exchange is based on thermal fluid (Marlotherm SH). Heat output: max. 80,000 kcal / h, fuel: gas, operating mode: automatic, direct monitoring, max. operating pressure: 4 bars, maximum temperature: 3500C, thermal efficiency: 85-90%. Connection type: DN-50 / PN-16 DIN 2633. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 )  ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Marudhar, Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Storage tanks outside marbled for wine, water, fruit juice, schnapps 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

We have 6 Hongyuan HY-6 texturizing machines for sale,V-type,manufacture year:2011,240 spindles,with airjets,unitens,pneumatic yarn feeders PU discs,godets drawing,same like Barmag EFK texturizing machine..still working now.Very good condition.Sirous buyers contactus,please.

Your contact person in our company: Lord: Andre Evering Lord: Marcel Brahms Lord: Simon Blank We offer you a used pallet rack here manufacturer Hovuma. Specifications for the pallet shelf traverse: Shelving system: Hovuma Included in the scope of delivery are: 01x Pallet rack trusses, used Material color: green Design: ground/head traverse INP profile: 100 x 50 mm Agraffe: 2 hooks clear width: 3,380 mm max. load per truss pair 2,250 kg, at the same time. distributed load 02x Safety pins, used Execution: complete. Galvanised To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of the BGR 234 visual  ...

Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations

Eurolux Beer Tanks / Fermentation Tanks in AISI 304 test pressure: 1,5 bar, operating pressure: 0,99 bar with Cooling Jacket with Isolation - Capacity: 1000 Litres NEW Material: V2A (AISI 304) 1.4301 Upper bottom: with Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 with over- and underpressure valve Tank Body: with Cooling Jacket 600 mm wide with inlet 1” external thread with Isolation Lower bottom: With Conical Bottom and rest outlet underneath with a forklift and pallet truck Measurements and weight: WxH: 1150 x 1950 mm Zyl. height: 850 mm weight: 170 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock Butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 Immersion socket for temperature control Temperatur ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

We rent and sell storage containers, shipping containers, site containers, overseas container, double Office container plants. Offering transport possible - please contact us. Sample images - sightseeing by appointment possible. Check our other offers.

A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...

We rent and sell storage containers, shipping containers, site containers, overseas container, double Office container plants. Offering transport possible - please contact us. Sample images - sightseeing by appointment possible. Check our other offers.

Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. outside marbled 4.500 liters UNI-DACH Measurement and Weight: Total Height: 2900 mm Cyl. Height: 2000 mm Diameter: 1750 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: - with manhole round DN 500 with hanger - with 2 cran eyes - with thread connection 2 x DN 25 and 1 x DN 65 - with CIP spray head Cylinder tank: - ladder hook - with sample valve - with level indicator with bar and scale - with temperature indicator analog - with thread connection DN 80 Lower bottom: - with conical bottom - with forward pulled outlet pipe with butterfly valve DN 50 - with 4 calotte feet height adjustable

with manometer, with butterfly valve, sample valve 31 x candles L x W: 560 x 70 mm Threaded connection from above: DN 80, DN 50, DN 40, DN 80 Below DN 32 Perm. Operating pressure 10 bar Perm. Operating temperature 140 ° C 12 staple screwdrivers M16-L2-8 Content: 198 liters Year of construction: 1996 Type: 802A.500-31x3-00 Measurements and Weight: Diameter: approx. 700 mm Height: 1970 mm