ku used for sale

Engine Brand: KUBOTA, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 56 Kw, Rated Speed: 2700 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/273131, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: V2403; Transport weight [kg]: 240

Engine Brand: KUBOTA, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 56 Kw, Rated Speed: 2700 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/273132, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: V2403; Transport weight [kg]: 248

Engine Brand: KUBOTA, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/273089, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: V1305; Transport weight [kg]: 140

Engine Brand: KUBOTA, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219162, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: D905D; Transport weight [kg]: 110

Engine Brand: KUBOTA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 12 Volt , Rated Power: 41 Kw, Rated Speed: 3600 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/295213, , = More information =, , Type: Engine, Type of fuel: LPG, Empty weight: 500 kg, Type number: WG1605

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

Calender consisting of: (Version: 2024-02) Manufacturer: Eduard Küsters Maschinenfabrik_Krefeld Thermobonding calender, type 413.50 YOC: 1985 Nominal width: 3700 mm Fabric width: 3500 mm / conversion to 3200 mm Total force: 555 kN Line force: 150 N/mm Production speed: 10-150 m/min Roller Equipment: 1 Küsters floating roller (S-roller) 1 Raculan 1 steel roller Non-binding information from the manufacturer. Technical documentation and electrical documents available Special feature: Heat exchanger included in scope of delivery. Electric heater no longer active, therefore conversion to heating via external thermal oil system (not included). Sale: as seen, without further warranty Condition: ready for use Find more here - / Contact us at -

2004 Kuka KR 125L90-2 TJ Operational hour: 36.700 Controller: KRC1 KR 125 L90-2 TJ | KR C1 Year of manufacturing: 2004 Controller type: KR C1 Maximum reach: 2.410 mm Payload: 125 kg External axes: Spare parts: robot type discontinued, spare parts availability limited Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - / Contact us at -

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chip belt dryer, Kuvo belt dryer, length 15.5 meters+7 meters

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 7 kW weight of the machine ca.: 1.8 t required space: 2.3x2x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kuka robot LBR iiwa 14 R820 + controller Sunrise Cabinet Including KUKA robot KRC4 SmartPad Control Panel Payload: 14 kg Reach: 820 mm Year of construction: 06/2016 The device can be demonstrated on site before purchase. Find more here - / Contact us at -

Two-side evaporator GEA KUBA Type: DRS 44637 Cooling capacity: 60.7 kW at DT7, 58 kW at DT8 Fin spinning: 7 mm Fans: 4 x 630 mm Dimensions: 4500 x 1550 x 700 mm Block made of stainless steel Refrigerant: NH3 Volume: 72 L Weight: 650 kg Quantity in stock: 3 Reference number: CH 535 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

I sell the veneer assembly machine KUPER FLI. Built in 2007. Very good condition. Available the same.

Deburring of sheet metal edges using rotating stainless steel brushes up to sheet thickness 6 mm

Kuka KR 16-2 Year of Make: 2010 Payload: 16 kg Reach: 1611 mm Control: KRC2ED05

Evaporator GEA Kuba Type: SGL 102 Cooling capacity: 14.95 kW at DT8, 11.85 kW at DT7 Fin spinning: 12 mm Fans: 2 x 500 mm Dimensions: 2430 x 950 x 720 mm Refrigerant: Freon Volume: 26.1 l Weight: 123 kg Quantity in stock: 3 Reference number: CH 509 Condition: Used in good condition Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Vacuum cutter Manufacturer: Laska Model: KUX 500 Made of stainless steel Dimensions: 4170x3280x2850mm Electric power: 199kW Voltage: 3 x 400V 50Hz Weight: 6000 kg

x-travel: 350 mm y-travel: 200 mm z-travel: 350 mm table surface area: 700 x 280 mm spindle taper: SK 40 : 150 - 1660 U/min feeds: 25 - 285 mm/min rapid traverse: 1 m/min quill stroke: 80 mm milling-head swivable +/-: 45 ° total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

500 plastic pallet boxes Used goods, see pictures Manufacturer: Uni-Pak Colour grey/black Dimensions: 1200x800x765mm 500 pieces available. Negotiation price: € 30,- net from stock P10271 Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks

KSS8.5.46, Axes 6, 90 hours, load capacity 10 kg, reach 901 mm, repeatability 0.03 mm Weight 52 kg,Controller 33 kg, smartPAD4, KSS 8.5,incorporated 2x Pneumatik air 1x cleanair, 100 Mbit Busconector, 2x extern axis conector Resolver Input, Datacable,Motorcable

Controller KRC 4, KSS 8.3.42, range 2896mm, nominal load capacity 240 kg, weight 1145 kg, IP65, data cable, motor cable, smartPad 4, tested, warranty

6 axis mechanics/manipulator, max payload 10 kg inline, reach 1101 mm, IP 54, weight approx. 55 kg, controller KRC 4 compact 33kg, KSS 8.5.43, incorporated 2x Pneumatic air, 1x cleanair, 100 Mbit Busconector, 2x extern axis conector Resolver Input. smartPAD 4-2, Warranty.

Standard, IP 65, A4-A6, weight 99 kg, max. load capacity 240 kg, warranty

As good as new, controller KRC 2 edition 2005, KSS 5.6, Teachpendant KCP 2 ed 05, nominal load capacity 15 kg, reach 1570mm, weight 235 kg, IP 64, warranty.

Unused, stock item, Model Standard, A4- A6, IP 65, max. load capacity 30 kg, weight 99 kg, warranty

Unused, stock item, model standard, IP 65, A4- A6, IP 65, max. load capacity 210 kg, weight 81 kg, warranty

Controller KRC 2 ed 05, XP, KSS 5.4, X11, Profibus card, nominal payload 16 kg, max reach 1611 mm, IP 65, motor cable, data cable, teachpendant KCP 2 ed 05, warranty

Continuous veneer press panel size 3200/1400mm External and inner hydraulic cylinders Press pressure can be adjusted separately Panel heating steam and electricity

thickness: . mm width: . mm length: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: KUKA Model: KR 100-2 PA Year of Manufacture: 2009 Weight: 1240 KG Work Area Dimensions: - A: 2,180 mm - B: 3,037 mm - C: 3,200 mm - D: 2,160 mm - E: 1,040 mm - F: 1,350 mm Total Volume: 72.7 m³ Techincal Details: - Maximum Reach: 3,200 mm - Payload Capacity: 100 kg - Additional Load on Arm/Swing/Carousel: 50 kg / ~200 kg - Maximum Arm & Swing Load: 50 kg - Total Maximum Load Capacity: 350 kg - Number of Axes: 4 - Mounting Position: Floor-mounted - Design: Standard - Position Repeatability: ±0.25 mm - Path Accuracy: Not specified - Controller: KUKA KRC2 Edition 2005 - Weight (Without Controller): Approx. 1,200 kg - Operating Temperature Range: +10°C to +55°C - Protection Class: IP65 (Dust & Water Resistant) - Installation Footprint: 1,006 mm × 1,006 mm - Power Supply Requirement: 13.5 kVA - Noise Level: < 75 dB

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Roboter Kuka Quantec-2 KR 120-3100-2/FLR, Type: Quantec-2 KR 120-3100-2/FLR, Year: 2021, Control: Kuka Smart Pad/KukaVisual 6.0, Achsanzahl: 6, Bodenmontage: yes, Saugsystem: Vakuum, Year :2021

Manufacturer: KUKA KR 180, Year: 2004, Max workpiece weights kg: 180, Year :2004

Manufacturer: Kuper Schrumpffolienanlage Duplex, Year: 1993, Foil wrapping machine mm: 2 Fach, Welding frame dimensions mm: 1500, Intermediate transport mm: 1900, Shrinking tunnel mm: 4600, Outlet conveyor mm: 2500, Total connection value in kW: 65, Foil 1 width mm: 1500, Through running hight mm: 1150 X360 , Required space L x W x H mm: 4600 X 2100 X 1400, Year :1993

Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Manufacturer: Kuhnke Steuerung, FREE TEXT: mit CPU Karte, Free text 1: mit RAM Karte, Free text 2: inkl Einsteckmodule,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Type: Schleifmaschine,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Control: CECC 75101-801-C064MS-G1A-3G, Serial number: B5282-B1300-G963, Axis card: 140.642.01,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.69,

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,