ku used for sale

Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg

New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

Model: SFLE Blastfreezer Cooling capacity: 10,3 kW (-18 °C) Year of manufacture: 2018 Options: with electric defrost Tube volume: 20,1 dm³ Number of fans: 2 pcs. Distance between lamellas: 12 mm Air flow: 13 520 m³/h Dimensions: 1813 x 1963 x 1210 mm Weight: 168 kg Product quantity: 2 pcs. Condition: new

Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.

New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.

Sheet deburring machine make KUNZ type K 2Machine -No: 3126Max. Sheet thickness: 8.0 mmBrushes: 2Brush diameter: 300 mmMotor power: 2 x 2 kVADimensions L x W x H: 1000 x 700 x 600 mmWeight approx: 150 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engraving milling machine make KUHLMANN type GM-1-1Make -No: 19.1.0011 year of manufacture 1982Technical specifications:Pantograph setting: 1 to 100Working table: 500 x 200 mmTable length adjustment: 320 mmTable cross adjustment: 200 mmTable height adjustment: 280 mmTemplate table: 500 x 400 mm6 spindle speeds: 4200-20000 rpm.Drive power: 0.25 kWPower connection: 380V, 50HzDimensions L x W x H: 1200 x 1000 x 1400 mmWeight approx.: 250 kgMachine color: greenneededSpecial price, as in stockPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding robot make KUKA type KR 6 ARCYear of construction 2008Technical specifications:Load capacity 6.0 kgNumber of axles 6Repeatability +-0.1mmMax Reach 1823.5mmWeight around 235 KGWith- Control KR C2used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spot welding machine make KUKA type K 15 / PFactory no. 177, built in 1972Rated power at 50% ED: 15 kVAElectrode force of: 50 - 200 kpNominal primary voltage and frequency: 380 V, 50 HzDischarge: 320 mmConnected load: 32 kVAOpen circuit voltage: 1.7 - 3.0 VOperating current at 50% ED: 5 kASecondary short-circuit current: 18 kAusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

90° angular gearbox from Kumera Norgear, model KV1V-DB 450kW Input 1422 Ratio 2.4:1 ~700kg With all standard attachments

1 KUSTERS finishing foulard type 222.54-4600, face roller width 4.800 mm, working width 4.600 mm, the upper roller is S-roll, year 1969 and fully overhauled in 2011, AC motor with frequency inverter, entry with ERHARDT & LEIMER KF selvedge spreaders and scroll rollers, exit with banana roller and dancing roller for speed adjustment

Manufacturer: KUPER Type: FWQ 1800 Techical data of the overall machine: Overall dimension: 3150 x 1750 x 2100 mm (height) Max. working width in grain direction: 1900 mm Min. working width in grain direction: approx. 550 mm Veneer strip width across the grain: from approx. 65 mm Veneer thickness: approx. 0,4 - 2,5 mm Working speed of transport aggretate 2 settings: approx. 40 or 75 m/min. Infeed speed of transport belt: approx. 25 m/min Working height taken from floor: 900 mm Operating voltage, standard: 380 V, 3 Ph, 50 cycles Total connection value, incl. stacker: approx. 8 kW Power consumption, effective: approx. 2 kW Air pressure connection: 7 - 14 bar Operating power: 7 bar

x-travel: 500 mm y-travel: 360 mm z-travel: 420 mm control: Heidenhain 355 handwheel: tool taper: SK 40 weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Palletizing system for sacks, trays or similar products. Kuka palletizing robot type: KR 180-2 PA Kuka was built in 2004, gripping tool and the recording tape are NEW

Veneer gluer Kuper Stand unloading 630mm Feed approx. 7m/min Drive electric motor 25Watt, 190Volt Connection voltage 220Volt

Fully automatic slicer / packaging line with marking system Cutting / Depositing / Packaging / Weighing / Marking KUCHLER S.A.M. PX3 Specifications: Type slicer: SAM PX3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Weighing & Labeling Unit: Mettler Toledo PAZ UC-GTT-M, 3/6 kg 400 volts / 50 Hz / 3.8 A Year of construction of cold cuts & packaging line: 2018 Year of construction of weighing & labelling unit: 2018 Film size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Performance up to 150 packages per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, teflon coated including original knife grinder including original knife lifter including original operating instructions Original price in this version approx. EUR 52.000, ...

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

With the device, upper and lower parts were previously joined together and pressed. Components are Kuka Scara KRC2sr Robot BJ 2010 Pneumatic control Electrical control with frequency converter 4 conveyor belts Description Robotor Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point Working space Intersection of axes 3 and 4 Weight approx. 20 kg Datalatt Robot

number of controlled axis: - workpiece weight: - kg throat: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mobile robot cell with base frame and aluminum acrylic glass protective cabin - Solid aluminum clamping table for horizontal and vertical clamping - High-precision KUKA robot KR 120 R2700 extra HA with robot manual control panel - Spindle for milling - Control cabinet for KUKA robots - Control cabinet for milling spindle Robot INTERFACE INTERFACE Parallel Safety X11/X13 INTERFACE implementation X51 INTERFACE Ethernet 1xRJ45 X66 INTERFACE reference switch X42 DIGITAL I/O 16/16/4 MCC-30.1S KR C4 Docs & Parts Standard KSS 8.3 KUKA.ProfiNet Controller/Device 3.2 KUKA.SafeOperation 3.2 KUKA.PLC ProConOS4-1.1 ltd KUKA.CNC 2.1 KUKA.DiagnosticSafety 2.1 KUKA.WorkVisual KUKA smartPAD 10 m KUKA smartPAD holder Cable set 7m CON X20 Refe ...

Hot forging press Kurimoto C2F-16 Year: 2002 Capacity: 1600 ton Stroke: 200 mm Stroke per minute: 60 Die height: 707 mm Bolster area: 1265x890 mm Adapter area: 930x1065 mm Main motor: 75kW, 480V

Industrial robot Manufacturer: Kuka Type: KR10 R1100 sixx Year of construction: 2016 Reach: 1100 mm Weight: 55 kg Payload: 10 kg Kuka KRC4 compact controller Kuka Software KSS 8.3 KUKA. SafeRangeMonitoring 3.2 KUKA. RemoteService 1.2 KUKA. WorkVisual Weight: 33 kg Kuka SmartPad KCP4 Kuka connection cable Robot originally packed ! Operating hours: 0

Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.

Feed screw stainless steel used Manufacturer: KOMEN & KUIN D.V. Diameter approx. 500 mm, Conveying length approx. Mm Stainless steel Drive 3 kW 380 / 420 V Total dimensions approx. 4 x 1.6 x 1.6 m. The screw was mounted on this screw blancher Changes and errors in the technical data and information excepted.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Rip-off saw for cutting waste material (SLABS). Suitable for processing waste after an angle circular saw. Combined woodworking machine for processing waste material. It offers a two-in-one solution. In one pass, the machine cuts a board from a semicircle (slab), which cuts the spreading unit to the desired, quickly adjustable size. The machine can be used for cutting/deburring prismatic materials, but also for waste processing with one machine. The configuration of the machine and its parameters is carried out by arrangement. Technical parameters of the horizontal unit: Main engine power: 2 x 11 kW Feed motor power: 1.1 kW Minimum height of the starting material: 15 mm Minimum material length: 2000 mm Maximum material length: unlimited Maximum height of the starting material: 100 mm Technical parameters of the vertical unit: Main engine power: 2 x 7.5 kW Minimu ...

The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.

REF-1107 S.A.M. AUTOMATIC SLICER WITH OUTFEED CONVEYOR Automatic slicer with outfeed conveyor belt. Manufacturer: S.A.M. Kuchler. Model: IL-4-220 Serial number: 100525 Year: 2004 CE marking. 230 V. 50Hz. 0.43 A. 6-7 bar pressure. Manual cut adjustment. Product outfeed by conveyor belt. Complete with a packing machine. 4 types of slice arrangement: - Stacked - In a circle - Shingled horizontally - Shingled stack Machine dimensions without the outfeed belt: width 700mm, length 950mm, height 700mm. Packing machine dimensions: 750mm length, 400mm width, 380mm height.

Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2009 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated including original knife grinder including original knife lifter Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Used Kuba CAV L08-2x4C condenser. Complete with 8 fans - 50 Hz - 0,9/1,2 kW - 620/720 RPM - Diameter 800 mm and a total airflow of 143.040 m³/h. No. 13476 Brand Kuba Type CAV L08-2x4C Product type Air Cooled Condensor kW 587,3 (Freon) Number of Fans 8 RPM of the Fans 620/720 Air Flow in m³/h 143.040 diameter fans Ø 800 mm Surface (m2) 1.778 Tube volume 288 dm³ Sizes 8600x2370x2100 mm (LxWxH) Weight 2100 kg Remarks | Y.o.b. 2003 Amount in stock 1

The facility comes from a university school and is in very good condition. General: Year of construction 1999 Weight 222 kg

throat: 900mm; feed: 15 m/min;

Industrial robots Brand: Kuka Model: KR 150-2 Series: 2000 Year of construction: 2007 Nominal payload: 150 kg Reach : 2700 mm Number of axles: 6

Description GUK reversible table from 2009 mobile height adjustable frequency controlled

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing

Veneer assembly machine model FW 1100,