128,849 used machines on RESALE, but how to find them? Machine Search
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm
The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...
Cooler CUBA Type: SGBE 56-F82 Cooling capacity: 32.8 kW at DT8, 26.2 at DT 7 Surface: 193 m2 Air flow: 14 600 m3/h Fin spinning: 7 mm Electrical heating Fans: 2 x 560 mm Dimensions: 2700 mm x 900 mm x 1000 mm Refrigerant: Freon Volume: 44.7 l Pieces in stock: 3 Reference number: CH221 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
Plastic Modular Belts/ Belt Conveyors Condition: Used Year of construction: 2016/ 2017 Total length: approx. 6500 mm Total width incl. motor/feet: approx. 1950 mm Total width without motor: approx. 1320 mm Conveyor width: approx. 1190 mm Conveying height (height-adjustable): approx. 410 to 450 mm Material: Steel/ Plastic Strap Type: Plastic Colour: Light Grey/ Dark Grey Including SEW motor (0.75 KW) with Movimot (speed adjustable) Feet included (height adjustable) Stock: 7 pieces Price per piece Internal Article Number: 2026021103 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for ...
number of controlled axis: unbkt. workpiece weight: unbkt. kg throat: unbkt. mm total power requirement: unbkt. kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m
VAKONA energy-saving cooling tumbler ESK 850 STL-B Year of Make: 2017 Equipment: – Container, machine cabinet and frame made entirely of stainless steel – Machine fixed – Touch screen control for operation in manual and automatic operation – Storage space for up to 99 recipes with freely programmable parameters: total, working and break time, rotation speed, Temperature, vacuum height, ventilation intervals, container position and container swivel operation – Rotational speed of the arm infinitely variable from 3-18 rpm – Direct cooling system with powerful cooling unit, heat exchanger in double-jacketed tank made entirely of stainless steel – Vacuum system including high-performance vacuum pump, fully automatic, programmable ventilation cycles, – sterile filters for disinfection of ventilation air, hygienic automatic water separator – electric infinitely ...
Cooling cell with quail cooling motor Year of construction 2011 Coolant: R134a 2207 Height: 250cm Width: 90cm depth: 225cm
New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.
Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.
; Gross weight [kg]: 1005; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140
; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110
Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.
Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg
Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake
Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg
Quick Snap brush segment, brush, plastic brush, nylon brush, weed brush, conical brush -Brush: Steel/plastic bristles -Wooden ring: Ø 490/328 mm -Quantity: 1x brush included -Price: per piece -Dimensions: Ø 760 x 260 mm -Weight: 9.2 kg/piece
Crawler axle, crawler chassis, mini excavator, tracked excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -tensioning cylinder
Bezel, setting stick, lynette -Bench: for crankshaft grinding machine -Max. flow rate: Ø mm -Peak height: 225 mm -Technical drawing: see photos -Dimensions: 385/115/H265 mm -Weight: 20 kg
Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg
New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.
KÜBA evaporator type SHB 127 with 3 fans diameter 710mm, lamellar distance 8mm, with new defrost heater. 107 liters capacity. 3 pcs.
Polycarbonate, plexiglass, acrylic glass, acrylic glass -Plastic panels: transparent -the panels are covered on both sides with protective film -the panels can be cut with guillotine shears -the panels are flexible but not suitable for bending -Length: 3000 mm -Width: 2000 mm -Thickness: 2 mm -partly slight damage to the edges -Number: 20x pieces available -Price: per piece -Weight: 14.5 kg/piece
New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg
Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit for: Power chuck -with: transport trolley -Drive: Siemens 220/380 V 1.5 kW 1405 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1330/510/H1200 mm -Weight: 170 kg
Bezel, setting stick, lynette -for: Crankshaft grinding machine -Technical drawing: see photos Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg
Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg
Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg
Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools
Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg
Slip ring, slewing ring, rotary transmitter, slip ring rotor, slewing ring slip ring, column slip ring, slip ring transmitter -with: rotary outlet -for: electricity 9x -Dimensions: 390/220/H190 mm -Weight: 11.6 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 (Ø 106 mm) -Through hole: Ø 80 mm -Weight: 82 kg
New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.
Stick electrodes 3.2 x 350 -Type: Phoenix SH copper 1K -Price: per package -Number: 5 packages available -Weight per package: 4.4 kg
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 19 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 260/180/H150 mm -Weight: 6.1 kg
Bezel, setting stick, lynette -for: Crankshaft grinding machine -Max. flow rate: Ø mm -Peak height: 245 mm -Technical drawing: see photos Quantity: 1 piece available -Weight: 22 kg
Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools
Electric motor, three-phase motor -Power: 4.0 kW -Speed: 2880 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Number: 1x available -Price: per piece -Dimensions: 390/300/H230 mm -Weight: 43 kg
Water softener, water softener tank -Bank: approx. 200 liters -Incl. Regeneration salt for water softeners -Dimensions: 640/640/H880 mm -Weight: 172 kg
New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.
PLC control, digital output -Manufacturer: KUHNKE -Type: 653.000.43 -Quantity: 1x power supply unit included -Dimensions: 260/135/H235 mm -Weight: 3.2 kg
Timing relay, reverse power monitor, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KPW 20 5/1A 400V -Price: per piece -Number: 4x available -Weight: 0.7 kg
maximum number of results exceeded
please refine your search
