ku asy used for sale

KUKA KR 180 Series 2000 robot with 3m process axis max. weight: 180 kg Max. reach: 2700 mm Max. Payload: 180kg Dimensions: 2700mm Number of axes: 7 Year of Make: 2001 Scope of delivery: robot, controller, cable, teaching panel, circuit diagram In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Palletizing Robot KUKA KR40PA KRC2ed05 Control: KRC2ed05 Number of axes: 4 Max. load capacity: 40 kg Max. working range: 2091 mm Year of manufacture: 12/2009 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams, floppy disk drive for data backup In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot KUKA KR240 R2700 prime KRC4 - mechanics only Max. load capacity: 240 kg Max. working range: approx. 2700mm Scope of delivery: robot mechanics without accessories In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

KUKA KR 22 R1610-2 Industrial Robot Approx. 500 operating hours, serial number 1304963. 6-axis industrial robot with 22 kg rated payload and maximum reach of 1,612 mm.

KUKA KR200 comp Series 2000 robot with traversing axis, 4 meters long Control: KRC2ed05 Number of axes: 7 Max. load capacity: 200 kg Max. working range: 2400 mm Year of Make: 2009 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot KUKA KR10 R1100-2 / SEL KRC4 2 pieces available 1x 135 and 1x 82 operating hours Year of construction: 10/2021 Number of axes: 6 Max. load capacity: 6 kg Max. working range: approx. 1100 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

KUKA KR150L110 robot Number of axes: 6 Max. load capacity: 110 kg Max. reach: approx. 3100mm Year of manufacture: 8/2009 Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

General SKU355W953 LocationBarneveld CEcheck MakeKurt Schneider TypeSHD 75 KW Main Features MaterialStainless steel Motor75 KW Specified Features - Dissolver Dissolvercheck Shaft length800 mm Disc diameter600 mm Between shaft and frame800 mm With covercheck Motor75 kW, 380-420 volt, 1478 rpm Speed mixing shaft141/1300 rpm With hydraulic liftingcheck Motor1,5kW, 400V, 1690 rpm MaterialHard chrome, stainless steel 1.4000 (aisi 429) General No.00340 Year of construction1999 With switchgearcheck Floorspace2,70x1,90 m Total height2,50 m Weight2600 kgOils & fatPaints & coatingsDissolversOintmentsFine chemicalsOther chemicalCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicKurt Schneider SulzheimIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMixers > DissolversInd ...

Robot KUKA KR10 R1100 sixx KRC4 complete (white) Year of Make: 2014 Number of axes: 6 Max. load capacity: 10kg Max. working range: approx. 1100 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot KUKA KR10 R1100 sixx KRC4 - orange Serial number 508436 only 267 operating hours Serial number 508438 only 273 operating hours Year of manufacture: 03/2017 Number of axes: 6 Max. load capacity: 10kg Max. working range: approx. 1100 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot KUKA KR6-2 KRC2ed05 Control: KRC2ed05 Year of Make: 2010 Number of axes: 6 Max. payload: 6kg Max. working range: approx. 1611mm Profibus Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot KUKA KR3 R540 sixx KRC4 complete profinet only 582 hours Year of Make: 2016 Number of axes: 6 Max. load capacity: 3 kg Max. working range: approx. 540 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Robot KUKA KR16L6-2 KRC2ed05 Control: KRC2ed05 Number of axes: 6 Max. load capacity: 6 kg Max. working range: approx.:1800 mm Year of Make: 2012 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Robot KUKA KR 60L30/2 Robot Complete ZH 3 Year of Make: 2003 Load capacity: 30kg Reach approx.: 2429mm Control: KRC2 KUKA Zentralhand ZH3 installed In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

cutting capacity: 2,5 mm mm throat: 750 mm round blank diameter max.: ca. 1500 mm weight of the machine ca.: ca. 800 kg includes on set of new replacement tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUKA KR 3 robot Control: KRC3 Number of axes: 6 Max. load capacity: 3 kg Max. intervention: 680 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teach panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

With double lifter for 200L tote bins and unloader, Bowl capacity: 750 litres, Knife speed: variable, 60 - 3300 RPM, Mixing speed: 150 RPM, Bowl speed: 4, 7, 10, 14 RPM, Power: 3 x 380V, 50Hz, 273kW, Compressed air: 6 - 10 Bar, Water: 2 - 6 Bar, Dimensions: 4330 x 3700 x 3050 mm (open lid), Weight: 7900 kg

Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging / Weighing / Labeling KUCHLER S.A.M. P3 Technical data: Slicer type: SAM P3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Scale/Labeler: Mettler Toledo PAZ UC-GTT-M 400 Volt / 50 Hz / 3.79 A Year of Make: 2015 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated New price in this version approx. EUR 45,000 The display of the P3 cutting machine is defective. Therefore, sold as DEFECT / SPARE PARTS SPEDNER! Condition, see original pictures! If you have any questions, email or call.

Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement.

Year of manufacture: 2024 Maximum Load Capacity: 62kg Nominal Load Capacity: 50kg Maximum Reach: 2501mm Controller: KR C5 Number of axles: 6 Range of motion: A1: ±185° A2: -175° / 60° A3: -120° / 170° A4: ±180° A5: ±125° A6: ±350°

DMG MORI Kühlmittelanlage 980 l | 40-80 barYear of manuf. : 2018 Control : Sonstige ____________Description:In General:Manufacturer:DMG (Bürener Maschinenfabrik)Year of manufacture:2018Total number of pumps:5High-pressure pumps:2 (40 and 80 bar)Filter:Paper belt filterTank capacity:approx. 980 l

Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V

Leonhard Kurz Model H Book Edge Gilding Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Leonhard Kurz Model H Book Edge Gilding Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Leonhard Kurz Model H Book Edge Gilding Machine Price: 2500 EUR Download PDF Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V.  ...

This 3-axis KUNZMANN WF9 CNC was manufactured in 1999. It features a reliable Heidenhain TNC 410M control system, ensuring precision and efficiency in operations. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF9 CNC vertical machining centre we have for sale. Contact us for further details.

Automatic perforator Kugler 340-2R - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Automatic perforator Kugler 340-2R Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Automatic perforator Kugler 340-2R Price: 11250 EUR Download PDF Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shel ...

General SKU212T530 MakeKuehni TypeSR 4 m² No.43608 Year of construction2002 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface4 m2 Tube capacity24,5 Ltr. Number of tubes:1 Tube diameter25 mm Tube length± 5000 mm Wall thickness tubes1,5 mm Max. temperature0/200 °C Shell capacity175 Ltr. Shell diameter492 mm Shell length629 mm Wall thickness shell4 mm Max. temperature0/200 °C Shell connectionsDN50 (2x) Cover connectionsDN25 (2x) MaterialStainless steel 1.4571 (316Ti) General Floorspace0,7x0,5 m Total height1 m Weight180 Kg CEcheckOils & fatConsumer wa ...

10,500 litre RIEGER mash tank with cooling coils Features: Volume 10500 L Material No. V2A Total height 3400 mm Overall length 4350 mm Cylinder length 2300 mm Diameter 2200 mm permissible. Operating overpressure 2 bar Operating temperature 30 °C Description: Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

General SKU013X058 MakeKühni AG Allschwil No.220850 Year of construction1983 Mounted on legscheck Specified Features - Stainless Steel Reactor Material finishMirror polished With jacketcheck Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume480 Ltr. Motor1 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity480 Ltr Vessel sizesdia. 800x900mm, Vessel insulated Dished bottomcheck Dished top sidecheck Manholedia. 260mm Top connectionsdia. 250mm + dia. 40mm + dia. 25mm With jacket(50 Ltr) Max. temperature200 Degr. C. With propellor stirrer:Viscojet: stirrer Motor1,0 KW, 220/380 Volt, With variable sp. drive Speed mixing shaft± 113-1130 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) General LocationBarneveld With switc ...

12,500 litre RIEGER mash tank with cooling coils Volume 12500 L Material No. V2A Total height 3700 mm Total length 3500 mm Cylinder length 2400 mm Diameter 2250 mm permissible. Operating overpressure 2 bar permissible. Operating temperature 30 bar Description Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

General SKU212T550 MakeKuehni No.227480 Year of construction1990 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface6.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface6.3 m² Tube capacity17,5 Ltr. Number of tubes:1 Tube diameter30 mm Tube length± 13,1 m Wall thickness tubes2 mm Shell capacity41 Ltr. Shell diameter190 mm Shell length2490 mm Wall thickness shell2,6 mm Max. temperature200 °C Shell connectionsDN 25 (2x), DN 15 Cover connectionsDN 80, DN 40 MaterialStainless steel 1.4571 (316Ti) General Floorspace2,6x0,55 m Total height0,35 m Weight160 kgOils & fatConsumer waste ...

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

This 6-axis KUKA KR 60-3 was manufactured in 2008. It features a payload capacity of 60 kg and a reach of 2033 mm, making it suitable for various applications. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 60-3 robot arm we have for sale. Contact us for further details.

Manufacturer: KUKA Year of manufacture: 2014 Model: KUKA flexible Cube Type of machine: Welding robot Drawing number: 89.009-14 Weight: 2900 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 6-axis KUKA KR30-3 robot arm was manufactured in 2014. It features a payload capacity of 30 kg and a reach of 2033 mm, making it suitable for various automation tasks. If you are looking to get high-quality robotic capabilities, consider the KUKA KR30-3 machine we have for sale. Contact us for further details.

This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information.

Centering Machine - KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering Length - Endless -Clamping unit with self-centering vice -Spindle drive 1.8 KW -Drill chuck -Chip tray -Connection cable -Forklift insertion for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg

Sturm Coating System Description: For sale is a used coating plant from the manufacturer Sturm, formerly used at the Mercedes-Benz plant in Hamburg for the machining of rear axle beams. Technical data & scope of delivery: Manufacturer: Sturm (plant) / KUKA & Yaskawa (robot) Year of construction main plant: 2019 Former operation: 3-shift (age-appropriate condition) Plant components: Aggregates, dryer and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several replacement KUKA robots (models KR 210L 150-2 / KR 210 2, model years 2006–2012) Related Robot Control Cabinets 2x Yaskawa Robot EPX 2900 1x Thermal aftertreatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to plant maintenance, it is state-of-the-art Electrics & mechanics: Mostly in an age-appropriate or good con ...

This KUKA KR140-3 COMP was manufactured in 2012. It includes a KR C2ed05 controller, enhancing its functionality. Primarily used as part of a cutting system, this robot arm comes with a control panel but without the robot head. Ideal for projects requiring robust automation support. Contact us for more information about this machine.

Table size: 3000 x 1000 mm Drive power: 4.0 kW Sanding belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Sanding belt lengths: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: -Two sanding belts for pre-sanding and finishing sanding -Triangle guide of the straps for a clear view and freedom of movement -Pneumatic abrasive belt clamping with ball guides -Adjustable belt speed -Tilting of the sanding belts up to 90° -Self-centering abrasive belt -Pneumatically opening belt channels -Manual workpiece movement in 3-axis -Each axle with brake or lock -Vacuum tension for the workpieces

This 6-axis KUKA KR 16-2 with KRC 4 was manufactured in 2014. It features a maximum reach of 1611 mm and a rated payload of 16 kg. The machine includes an articulated robot arm, KRC4 control cabinet, KUKA smartPAD teach pendant, and an end-effector/gripper unit. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 16-2 with KRC 4 robot arm we have for sale. Contact us for further details.

x-travel: 7000 mm y-travel: 2800 mm z-travel: 1100 mm spindle turning speed - stepless: max. 4000 U/min spindle drive motor: 30 kW column daylight: 2550 mm table-size: 8000 x 2000 mm tool taper: ISO 50 feed range: 1 - 15000 mm/min c-axis: +/- 105 ° b-axis: 360 ° Control: Siemens 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 14,8 x 7,9 x 5,4 m Retrofit end of 2026 - CNC control Siemens Sinumerik 840 D - ATC for 40 tools (ISO 50) - 2 axis universal Milling head - Coolant - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis KUKA KR 16-2 with KRC 4 was manufactured in 2012. It features a load capacity of 16 kg and a range of 1611 mm, making it suitable for various applications. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 16-2 with KRC 4 robot arm we have for sale. Contact us for further details regarding this machine.

Belt Curve Conveyor, Curve Conveyor, Belt Curve 90 Degree Year of manufacture: 2023 Manufacturer: Vanderlande Model/ Type: Belt Condition: used Total length outside: approx. 2370 mm Total length inside: approx. 1170 mm Conveyor width: approx. 600 mm Belt type: Belt with fabric insert Including side guide: approx. 100mm Including SEW motor 0.75 KW Total weight: approx. 350 kg Colour: dark grey/light grey/black Including Frequency Inverter North The conveyor technology ran until dismantling. Submission of an offer only with a valid imprint, sale only to commercial customers. Internal Article Number: 2026071903 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inc ...

This 6-axis KUKA KR30-3 robot arm was manufactured in 2015. It features a payload capacity of 30 kg and a reach of 2,033 mm, making it suitable for various applications. With a teach panel and KR C4 controller included, this machine offers flexibility and efficiency. If you are looking to get high-quality automation capabilities, consider the KUKA KR30-3 robot arm we have for sale. Contact us for further details.

Key data: 3050 mm, 800 mm, 850 mm

From location: CNC Bed Milling Machine Manufacturer: TOS Kurim Type: FSS 80 Year of Make: 1991 Control: Heidenhain TNC 407 Two-spindle H-V head that rotates automatically programmatically (horizontal/vertical) • Table clamping surface 800x3000 mm • X-axis working stroke (longitudinal) 3050 mm • Transverse stroke 800 mm • Vertical working stroke 850 (790) mm • Spindle taper ISO 50 • Spindle turning range 9 - 2000 rpm -1 • Working position. continuous 1 - 3000 mm / min -1 • Fast feed .. 8000 mm/min -1 • 22 kW spindle motor • Machine dimensions 7660x3470x2740 • Total machine weight 14400 kg

This 6-axis KUKA KR 30 L 16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. With 4 units available, each comes with a optional teach panel, KR C4 control unit, and cable set. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30 L 16-2 machine we have for sale. Contact us for further details.

Packing: ? mm Shipping weight: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2013. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details.

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2017. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details.