128,857 used machines on RESALE, but how to find them? Machine Search
Koppens” contact cooker Type BG 6000/400 continuous teflon belt grill all stainless steel suitable for thermo oil heated with lower and upper belt - bottom and top grilling temperature of the belts is separately adjustable nett length 6000 mm belt width 400 mm adjustable speed product height electrically adjustable total length 8.500 mm total width 1.450 mm total height 2.250 mm (closed)
approx. 14 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 14 running metres Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 06 x Stand approx. 650 cm x 110 cm, disassembled. 30 x traverse approx. 270 x 14 x 5 cm, D30. 60 x locking pins. Levels: Floor + 3 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2400,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece. ...
RECON Part number: 1213 6232 / 1230 9413 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Plansifter MIAG LM 655-155- Maize run, six passages, cleaned Broken frame inserts have been repaired. Good working condition. We also offer a similar machine with nine passages.
approx. 11,20 running meters, H: 650cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial racks, Shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 650 cm x 110 cm, disassembled. 24 x traverse approx. 270 x 14 x 5 cm, D30. 48 x locking pins. Levels: Floor + 3 48 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1960,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...
RECON Part number: 1214-0114 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
approx. 8.40 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 8,40 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 04 x Stand approx. 650 cm x 110 cm, disassembled. 18 x traverse approx. 270 x 14 x 5 cm, D30. 36 x locking pins. Levels: Floor + 3 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1520,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
RECON Part number: 1230 2774 -Diesel -even 604 new version ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Siemens Simoreg 6RA26 C98130-A1012-C242 Main drive with compact controller The above is on the board
approx. 5.70 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy-duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 5,70 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 03 x Stand approx. 650 cm x 110 cm, disassembled. 12 x traverse approx. 270 x 14 x 5 cm, D30. 24 x locking pins. Levels: Floor + 3 24 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1080,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Ground precision ball screw, D50 x 10/6mm, 892 mm, Eisenmann, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 20070616, D50 x 10/6 mm, 892 mm, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 615 mm Length of ball screw nut 164 mm, Max. total stroke 451 mm, Total length of the spindle 892 mm Diameter for coupling with motor 40 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit d ...
RECON Part number: 1213 7288 + 1213 7778 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net ...
RECON Part number: 1213 6235 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Type: 6SE7031-3FG20-Z Description: SIMOVERT MASTERDRIVES SIMOVERT VC, CONVERTER CHASSIS UNIT, IP00 3 500-575V AC, 50/60HZ, 128A NOM. POWER RATING: 90 KW .
30,06 running meters shelf racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 60 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4199,00 € net plus lega ...
RECON Part number: 1202 7073 / 3.601.0.170.601.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Type Grinders / Mincers Height 1580 Width 980 mm Length 1100 mm Voltage Electrical: 400V 50Hz 3N Installed Power 4 kw Main material Stainlees Steel Time of realisation 2-3 weeks Throat Diameter mm Grinder Type Feeding System Hooper
RECON Part number: 1213 6967 B-side / F21 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
DEAR'S SALE, MAK 8M601 SPARE PARTS 8CYL STD CRANKSAFT, LINER, PISTON, CONROD, FULL COVER ANY SPARE PARTS Brgds Hakan KUSCU +905323642509 info@kscege
5,06 m shelving racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 60 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 728,00 € net plus legally valid VAT ...
RECON Part number: 1213-6966 A-side / F7 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
Crankcase (engine block) Deutz TBG 620V12K
RECON Part number: 1230 2775 for diesel engine ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Fuel oil tank, storage tank, steel tank, diesel tank, tank system with 60,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, cleaned, overhauled and equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011 - steel blue. L = approx. 12.80 m / D = 2.50 m / weight approx. 11.5 tons. ...
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price
RC GROUP GLIDER FREE 630 V2 Y5 Brand:RC GROUP Type:GLIDER FREE 630 V2 Y5 Stock number:M23-4609 Cooling capacity:500 kW Application:Cooling Number of fans:12 Refrigerant:R134a Refrigerant Content:2x 107,5 kg Voltage:400 Volts Dimensions:7484 x 2310 x 2605 mm Weight:7,001 kg Year:2013 Number in stock:2 piece(s) Price:Quotation Request Description: Nice air-cooled RC Group water chiller with 2 screw compressors distributed over 2 cooling circuits. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C (Q= 602 kW at Tw= +15/10°C and Tamb= +40°C). Free-Cooling: Q= 536 kW at Tw= +15°C and Tamb= 0°C. Visit our website: used-refrigeration
EWD HDN/SV with width adjustment TOP ZUSTAND ! (1982/2009) WATER-CLOSED FUEHRS, SIDE BRETTERKAPPSAEGE... Through width 735 Passage shoe710 Hub 600 Speed max. 300 Feed speed 0-15 m/min Feed capacity 8.5 m/min Total weight 12 t SPALTKEIL ARTA C WITH SIDE WAREKAPPSAeGE Very well maintained facility little cut ! HDN-SV STATUS: VERY GOOD
Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg
used
tool adaptor: VDI 40 weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available
Komatsu 6D95L-1, 6-cyl. Diesel engine water cooled, 4,900 cc displacement, complete, runs. Diesel engines 1-6 cyl., various products: Deutz, Daedong, Hatz, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5 kw upwards, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.
Technical details drive: - Propulsion: Yanmar L100N - Starter: E-start (starter) - Number of cylinders: 1 - Fuel type: Diesel - Fuel tank capacity: 24 litres - Engine oil: 1.65 litres - Forced lubrication - Forced cooling - Fuel consumption at 75% load: 1.4 l/h - Sound pressure level (Lp): 67 dB(A) - Sound power level (Lw): 93 dB(A) Technical details Power generator: - Nominal voltage: 230 / 400 V - Apparent power at LTP: 3,200 / 6,900 VA - Active power at LTP: 2.5 / 5.5 kW - Apparent power at COP: 3,000 / 5,600 VA - Active power at COP: 2.4 / 4.5 kW - Generator protection class: IP 23 - Sockets: 1 x 230V Schuko / 2 x 230V, 16A / 1 x 400V, 16A - Protection class of sockets: IP 44 (LTP = time-limited generator power (max. power of the generator within 500 h/year with a continuous operation of the generator of 300 h), COP = aggregate continuous output with unlimit ...
Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use
Type: 751 carton sealing machine top Type: 651 carton sealing machine below Machine is to the close of folding cartons with tape (top/bottom).
RS Simulators Here we offer a temperature test chamber. Water cooling Temperature range: -45°C to +180°C External dimensions: width 1300 mm x height 2100 mm x depth 2250 mm Test area dimensions: width 840 mm x height 840 mm x depth 840 mm Aggregate part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating speed: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.
Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg
DEAR'S SALE, STD CRANKSAFT ABC 6DXC-720-100A Good condition, report... Liner, Conrod, piston etc.. main parts Brgds Hakan KUSCU +905323642509 info@kscege.com
This sturdy workbench is perfect for do-it-yourselfers and professionals who need a sturdy work surface with storage space. The work surface consists of a 38 mm chipboard on which a high-quality edged flat sheet is placed, thus providing a solid foundation for any type of project. Under the work surface there is a shelf rack with 12 pull-outs (6 pull-outs per side), which offer plenty of storage space for tools, materials and accessories. The scope of delivery includes: 01x Workbench, used/ new System: SSI Schaefer Type: PR 600 Dimensions: approx. W 2,900 x D 800 x H 940 mm consisting of each: 02x Workbench stand, second choice (new) Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x Workbench trusses, new Material color: blue Box profile ...
Machine type: Test mandrel Manafacture: System 3R Type: 3R-606 Year of construction: unbek. Condition: Used Offer will only be sent if a complete imprint is provided! Price 800 Euro incl. 19 % VAT and shipping within Germany Location Warstein , Germany Reference M-HIR-0623-1 DESCRIPTION We offer you to buy a used mandrel from the manufacturer System 3R, as shown in the pictures. Availability: Immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!
Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.
new
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: on request Power: 576 KW G3 Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 / Diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 F Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.060 Height approx. mm ...
maximum number of results exceeded
please refine your search
