129,242 used machines on RESALE, but how to find them? Machine Search
Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 yom: 2010 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen
; Power [PS]: 1822; Gross weight [kg]: 10293; Engine: Cummins KTA50-GS8; Accessories: Battery, Control Panel, Cummins C1675 D5A, Cummins KTA50G, , Incl. Coolant Heater and Battery Charger
Used Ruehle tumbler. Model MKR 600. Last service in 2021. RUEHLE MKR600 The RUEHLE drum tumbler-mixer combines many technical functionalities in the field of plasticizing technology. It is used, among others, in: - massaging - mixing - pickling - dry salting The RUEHLE tumbler model MRK600 is equipped with a highly efficient cooling unit and a very high-performance vacuum pump. In the computer software, we can determine the degree of product cooling. The band available to the user ranges from -15 ° C to + 15 ° C. The mass input determines the vacuum level, which can be changed at any time. The possibilities of plastic processing are just one of the advantages of the machine. It has also been equipped with a mixing function - thanks to which the raw material processing time is shortened to 10 minutes. Despite the typical massaging or mixing functions, the device ...
Alfa Laval FOPX 613 used
Vacuum pump Manufacturer: Pfeiffer Type: DUO 2.5 (PK D41 602A) Built: 2003 Pw: 0.13 kW For further data see also type plate photo All information without guarantee
Make: BOCK Type: HGX4/650-4 Max current consumption: 27A Power: 56.6 m3/h Low pressure: 19 Bar High pressure: 28 Bar Price on request Contact details can be found under Contact
- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880
This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel
: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 18,5 kW speed of the cutting drum : 112 rpm dimensions of the machine (l x w x h) : ± 2.950 x 1.600 x 1.780 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 7.000 kg/h for blocks of max. ± 810 x 650 x 350 mm number of knives: 7 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in Dolav boxes 3 x 400 V, 50Hz weight : 1.860 kg
Totally overhauled Baader 695 Bone Separator is designed to provide a gentle separation of raw meat material from waste components such as bones and skin. The machine utilizes a flexible squeezing belt to transport the product to a perforated drum. The belt gently squeezes the softer particles like meat and fat through the holes, while the harder particles such as bones, sinews, and cartilage remain outside of the drum. Capacity: Can process up to 1800 kg per hour. The throughput may vary depending on factors such as drum hole size, product type, pre-treatment, and choiceed pressure. The Baader 695 is a user-friendly machine that is easy and quick to clean. It is built in accordance with globally recognized sanitary standards. The pressure system ensures gentle product processing and reduces machine wear. Additionally, the machine is equipped with castors for easy handling.
Alligator scissors JMC 640-240 with hydraulic holder (Used machine) The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Manufacturer: Mc Intyre Knife length: 640 mm Measuring opening: 355 mm Cutting capacity: 240 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 opening: 60 / min Dimensions (LxWxH): 3200x1000x1800 mm Weight: 4000 kg Drive: 18.5 kw /400 V +1.5 kw Electric motor cooler Operation: foot pedal
Baader 694 Bone Separator Condition: Perfect, after complete overhaul Baader 694 Bone Separator is designed to provide a gentle separation of raw meat material from waste components such as bones and skin. The machine utilizes a flexible squeezing belt to transport the product to a perforated drum. The belt gently squeezes the softer particles like meat and fat through the holes, while the harder particles such as bones, sinews, and cartilage remain outside of the drum. Capacity: Can process up to 400 kg per hour. The throughput may vary depending on factors such as drum hole size, product type, pre-treatment, and choiceed pressure. The Baader 694 is a user-friendly machine that is easy and quick to clean. It is built in accordance with globally recognized sanitary standards. The pressure system ensures gentle product processing and reduces machine wear. Additionally, t ...
Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP
approx. 10.000 pieces, SSI Schaefer, EF 6420, Euro stacking boxes - used -: Price from location (net): 144 Piece(s) = 8,50€ / Piece Truckwise (792 pieces) = 7.50 € (net) / piece Complete purchase: 6.-€ (net) / piece Minimum purchase quantity: 144 pieces = 6 pallets Manufacturer: SSI Schaefer Type: EF 6420 VB S 5 Colour: grey Bottom: ribbed • Load [kg] 600 • Outer width [mm] 400 • Exterior height [mm] 420 • Exterior length [mm] 600 • External dimensions L x W x H [mm] 600 x 400 x 420 • Closed floor design • Closed walls design • Weight [kg] 4.18 • Handle pass-through handle • Basic dimensions 600 x 400 • Content [l] 83.8 • Inner width [mm] 353 • Interior height [mm] 416 • Inner length [mm] 553 • Internal dimensions L x W x H [mm] 553 x 353 x 416 • Material: Polypropylene (PP) • Usable height in stack [mm] 396 ...
Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator
Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine
Item number 68450-0101 Karte Step Motor PT8/10 Alu o. PE Stepper Motor Driver for Tetra Pak PT 8, PT 10 (pull tab applicator)
3000 pcs plastic box SSI Schäfer 60x40x12cm New goods, see pictures Payload per crate 30 kg Outer length: 60 cm / Inner length: 56.4 cm Outer width: 40 cm / Inner width: 40.0 cm Exterior height: 12 cm / Interior height: 10.2 cm Various colours Material: Polypropylene (PP) Dimensionally stable and robust Stackable on top of each other Negotiation price: € 4,90 net per piece from stock P10275 80 pieces per pallet, size, quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. Constantly over 5000 linear metres of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock)
YANMAR 6SHL-ET - 610 HP 1500 RPM SN 1319 FJG RUNNER EXCELLENT CONDITION VIDEO OF RUNNING AVAILABLE ON REQUEST
The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...
MAK 6M20 crankshaft Condition: Refurbished Part number: 1.13.7-25.1001-01 and 1.13.7-25.1000-11 - all base pins are standard size (180mm) - all connecting cones are 1st stage undersize ground (151,50mm) - incl. gear and counterweights - incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We are happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
CUMMINS MARINE GENSET 6BT5.9 1M 92 KW 1500 RPM - SN 87381266 -MAGNA PLUS DYNAMO MP-75-4 Reference number 20014 Brand generator CUMMINS/MAGNA PLUS Model generator 6BT5,9 RPM 1500 Serial number 87381266 General condition EXCELLENT NEW CONDITION Status AVAILABLE GENERATOR Brand generator MAGNA PLUS Model generator MP-75-4 Kva 93,8 Serial number generator 36229 Voltage 400 Frequency 50 Phase 3 SPECIFIC INFORMATION Governor N/A Starter N/A Exhaust system N/A Turbo YES Cooling system SEAWATER PUMP/HEADER TANK SPECIFIC FEATURES Panel YES Expansion tank YES Radiator NO Skid YES Soundproof box NO Weight (kg) 600 KG
DEUTZ SBV 6 M 628 - 882 kW - 1200 HP - 926 RPM Reference number 20116 Brand DEUTZ Model SBV 6M 628 Power 1200 HP 882 KW RPM 926 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor HYDRAULIC Exhaust system DRY Turbo WET Cooling system WATER COOLED Starter YES- AIR Remarks RUNNING ENGINE FEATURES Raw water pump INCLUDED Expansion tank Heat exchanger DIMENSIONS LxWxH (cm) 3200 mm x 1500 mm x 2450 mm Weight (kg) APPROX 11000 KG
High-performance double-sided contact cooking. The Formcook Contact Cooker is excellent for cooking boneless products such as chicken fillets, meat patties, steak, bacon, pancakes, fish fillets, shrimp and vegetables. This cooker has been used to fry vegan products like buns and steaks. The machine was last used in February 2025. Fat-free contact cooking with non-stick belts seals the natural juices and fats in the product for the highest eating quality and minimum cooking losses. The cooking time is adjustable. The Formcook Contact Cooker is manufactured by JBT Corporation in Sweden. More information is available at JBT’s homepage. A conveyor machine manufactured by Ilpra is included. The contact cooker and the conveyor are complete and ready for use.
Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...
Installation 2020 Plant shut down after 6 months and short test runs Original price 166.000,00 € Dosing and screening station Products - Product Name: Spices - Bulk density: approx. 0.4 - 0.7 kg/itr (AZO assumption) System characteristics Electrical characteristics Operating voltage: 230/400 V; 50 Hz. Control voltage: 24 VDC Degree of protection: IP 54 Compressed air characteristics Operating pressure: min. 5 bar /max. 6 bar Connections > 1/2" Compressed air quality class according to ISO 8573-1 Solid impurities: quality class 1 Humidity - at ambient temperature > 3°C: quality class 2/3 - at ambient temperature 10 mJ - KST value < 200 bar m/s - ignition temperature > 300 °C - Smoldering temperature > 275 °C - Contact Resistivity > 10° Ohmm
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
RECON Charging air cooler ready To be delivered also used
used
Key data: 2188 KW, 2702 kVA, 6300 V
CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL | YOM 2004 | Power 2,188 kWe | Natural gas Generator AVK 2,702 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset crankshaft it is turned periodically. ✓ Run test is possible but with some associated costs: necessary filling lub oil circuit with new clean oil, and some minor checkings. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...
used
SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 92cm Width: 164cm Height: 150cm Electric power: 1.5kW Delivery time: After the payment, from the stock
New machine BÄKO SPECIAL OFFER with 3 year warranty BÄKO Item No. 821189 Benefits: + TOP value for money + robust, mobile socket roll-out machine + Operation with lever sand sand sands and pedals possible + suitable for all types of dough for rolling out and touring + PVC conveyor belts, easy and quick to clean + therefore even suitable for marzipan and roll fondant + integrated electric motor + large digital display of the roller setting, instead of a mm scale on the lever + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Dough collection sheets made of stainless steel, on both sides of the table, pull-out + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 650 mm - Table length: 1,320 mm each = 2,640 mm - Roller adjustment: from 0.5 mm ...
Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm
used
Key data: 2745 KW, 3400 kVA, 6300 V
CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL (GS-J11 engine) | YOM 2016 | Power 2,745 kWe | Natural gas Generator Leroy Somer 3,400 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV ✓ Step-up transformer EFACEC 6.3/15 kV 3,500 kVA (YOM 2017) | Auxiliaries transformer ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset is kept hot and crankshaft it is turned periodically. ✓ Genset is ready to run. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...
; Gross weight [kg]: 3254; Engine: Cummins 6LTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 525
New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + with dough collection plates on both sides + fast spare parts supply within 1-2 business days
Key data: 48 KW, 60 kVA, 400 V
MODEL NO.: EQ-P6048 ENGINE: Perkins 1103A-33TG2 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V POWER: 60(kVA) / 48(kW) CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1179kg DIMENSIONS L/W/HEIGHT (MM): 250010001250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For ...
New machine Stainless steel model 12-month warranty Benefits: + Machine completely in stainless steel + with automatic reel + Dough tape is shaved up without significant tension + with automatic flour spreader + with automatic roller adjustment + with integrated electric motor + high quality synthetic tapes, easy to clean + easy to drive, with steering wheels and locking feet for stable grip + Operation with touch panel + Computer control (100 programs) and manual operation via push-buttons possible + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Hand reel supports left and right + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Piece of do ...
Key data: 64 KW, 80 kVA, 400 V
MODEL: EQ-P8064 ENGINE: Perkins -64 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V POWER: 80(kVA) / 64(kW) FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1357kg DIMENSIONS L/W/HEIGHT (MM): 260010001250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or individual advice on ou ...
maximum number of results exceeded
please refine your search
