krones tri bloc used for sale

Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR-500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 8 mm polypropylene strapping Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue

1 of un-used power supply, Schroff MPS Triple, type MPS 022, Vin 110-230 VAC (3 A), 50-60 Hz., Vout 5 V DC (23 A) / 12 VDC (3,5 A) / 12 VDC (2 A). Also known as KHKS/Kisters part numbers: 003192946 / X003192946 / K003192946

Working width: 300 mm Number of rollers: 2 St. Feed speed: 20 m/min. weight: 300 kg Dimensions (L/W/H): 4000x600x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Fully Automatic filling and storage systems with WITTMANN security PLC.

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in the automotive industry. Hydraulic Pressure: - Max Pressure: 180 bar - Operating Pressure: 150 bar Power: 25 kW Operating Frequency: 50 Hz Connection Voltage: 3 x 400 V Full Hydraulic System Installation Dimensions (L x W x H): 4700 mm x 2790 mm x 4850 mm Weight: 18,000 kg Find more here - / Contact us at -

Working width: 120 mm Working height: 1200 mm : 6000 mm Number of cylinders: 12 St. 1 pc. LAMINATION PRESS Type SLV - H - 6.0 - 1.2 - 120 - 6V - II -P -------------------------------------------------------- Technical specifications -------------------------------------------------------- working dimensions: Length: 6000mm Height: 1200mm Gluing thickness: 20 - 120 mm Number of pressure cylinders: 12 pcs. Cylinder type: Ø 63 x 120 mm Max. force per pressure cylinder: 50 kN Specific pressure: 7.5 kg/cm2 Number of hold-down devices: 6 pcs. Cylinder type: Ø 40 x 100 mm Max. force per hold-down device: 20 kN Number of sections: 2 Max. pressure: 160 bar Power: 3.0kW Pump flow: 10L/min Manual control with hydraulic valves every work surface in contact with glue is covered with INOX Materila covered each pressure cylinder and the hold-down device can be locked separately equal pressure in each ...

STEP-TRIGGERING CARD RS - 12404591

We offer Peri Trio Elements 270 x 240 with 50% discount newly covered with original Peri Finply formlining 32 x Peri Trio Element TR 270 x 240 á 3409,00€ - 55% Discount = 1704,50€ / Piece Net price You bid on 1 element Peri Trio 270 x 240 sold separately. Subject to sale Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Manufacturer: Trittgitter, FREETEXT1: ca. 1.790 x 1.200 mm, FREETEXT2: 35 Stück,

A complete Ernst Nagel brochure machine is sold Composed of Foldnak 8 SP Plus Online Trimmer Machine is used and fully functional. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded Price is net, VAT can be claimed.

Roll wrapping and settling Trima BA1000 - Manufacturer: Trima Triebeser Maschinenbau GmbH - Type: BA 1000 - Year of construction: 2014 - Voltage: 400 Volt / 50Hz - Fuse: 16A - Power: 1.9 kW - Weight: 680kg - External dimensions approx. 220x105x215cm WxDxH

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible.

A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Countertop sweeper TRILETY used condition, see pictures Type LKM Sweeping body for Multicar vehicle Year of construction 1998 Dimensions: 330/190/190 cm Negotiation price: € 2.590,- net Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.3 screens available (9-15 mm) Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), INSTALLED POWER: 45 kw, rotor size: 800x450 mm.

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

Inv. Num. : 8573 Type: VC 1810 Producer: TRIMILL Created: 2015 Parameters: Control system: Heidenhain iTNC 530 HSCI Work table length: 2000 mm Work table width: 1370 mm Maximum table load (uniform): 10000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14000 1/min X-axis travel: 1800 mm Y-axis travel: 1000 mm Travel Z axis: 700 mm Maximum feed speed axis X: 30000 mm/min Maximum feed speed axis Y: 30000 mm/min Maximum feed speed axis Z: 30000 mm/min Cone: HSK – A80 Number of all tools: 10 pieces Maximum tool diameter: 110/125 mm Max. tool weight: 12 kg Machine weight: 18000 kg Equipment: Tools Thermal clamps

We have the following equipment available for sale immediately. Two FRANCE TRANSFO SCHNEIDER ELECTRIC 1250 kva and 850 kva cast resin dry type voltage converter. years of construction 2003. Transformers they have hood which has been dismantled to facilitate extraction which are available in our warehouse

We offer for sale a copper cable crushing and separation line consisting of the following components: 1. VOTECS Machine - Model: EZ 611 - Manufacturer: Votecs - Rated Voltage (Nennsp): 400 V - Control Voltage (Steuersp): 230 V - Hydraulic Pressure: 160 bar - Year of Manufacture: 09/2007 - Rated Current: 38 A - Fuse: 50 A - Frequency: 50 Hz 2. SIDMA Overband - Type: Magnetic - Model: OVB 5620 - Manufacturer: SIDMA - Weight: 680 kg - Consumption: 1500 W - Residual Induction: 400 Gauss - Width (A): 200 mm - Conveyor Belt Speed: 1.5 m/s - Year of Manufacture: 2016 3. MITECO - Manufacturer: Miteco - Rated Voltage: 400 V - Full Load Current: 127 A - Frequency: 50/60 Hz - Phases: 3 + PE - Short Circuit Rating: 35 kA - Enclosure Type: IP54 - Year of Construction: 2015 - Normative References: IEC 60439-1, EN 60204-1 Find more here - / Contact us at -

5-axis portal machining center Type: VU 2313 Manufacturer: Trimill Year: 2010 Control: Heidenhain iTNC 530 X: 2300 mm Y: 1300 mm Z: 1000 mm Machine in good condition, under power. Find more here - / Contact us at -

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical machining center Type: VC 1110 Manufacturer: Trimill Year: 2005 Control: Heidenhain iTNC 530 HSCI X: 1100 mm Y: 1000 mm Z: 550 mm Table: 1300 x 1370 mm Max table load: 8000 kg Chip conveyor Machine weight: 16000 kg In good condition, under power Find more here - / Contact us at -

Measuring range: 1.000 mm error limit 20°C +/- 1°C: 3 + L(mm) / 300 µm repeatability: 2sec: 2 µm Resolution: 0,01 / 0,001 mm adjustment speed: max. man. 1 m/s Power: 0,7 - 1,6 N temperature: +10 .. +40 °C total power requirement: 15 W weight of the machine ca.: 15,0 kg dimensions of the machine ca.: 0,4 x 0,4 x 1,30 m Documents: Transmission: RS 232 Height Measuring Device TRIMOS - V 1002+ - Application area: 1.235mm - Max. angularity deviation: 12µm - Autonomy with air cushion: 30h - Autonomy without air cushion: 100h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Steel Bracket Insert Fabr. Tripan, Type 431 Kj Uregwt Ucehyxkonb Please request the respective quantity individually.

WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA

Manufacturer: Triventec Type: Dry ice blasting machine (exact type not known) Number of units available: 2 pieces Condition: used Use: Cleaning and surface treatment by dry ice blasting Location: Bremen

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Trimos TVM 602

Trimos V 604 +

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad

Tripet TST201CNC nr 3520.17.137 BJ.1987

General SKU212T513 LocationBarneveld MakeBuss Mach.No.60429-1 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure vapour evaporator9 Bar Main Features Surface5.7 m2 Specified Features - Falling film evaporator Condenser:trickling film cooler MakeBuss SMS Mach.No.60429-1 Year of construction1994 Heating surface5,7 m² Tube capacity400 Ltr. Number of tubes:61 Tube diameter25 mm Tube length1250 mm Shell capacity65 Ltr. Max. temperature-10/200 °C MaterialStainless steel 1.4571 (316Ti) Information Year of construction1994 Extra Specificationswith vessel: ø600x1000 mm, 280 ltr., outlet: DN80Falling film evaporatorsBuss-SMSColumns > Falling film evaporatorsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU212W134 LocationBarneveld MakeTricom Frimafa SWM Typeschudbed VFB 10./3 No.00064-01 Year of construction2000 Main Features MaterialStainless steel Motor22 KW Surface9.36 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface9,36 m² Bed sizes7800x1200 mm Product inletDia. 1000 mm and 600 mm Product outletDia. 600 mm (3x) Number of sections:1 Air inletcheck Air outletcheck Vibro motor2x Motorcheck With fan3x A&N, type CHAE 4-170 and CMBF 400 Motor15+22+22 kW, 400/690 volt With dust filtercheck MaterialStainless steel 1.4301 (304) Information Total height2,60 m Weight6170 kg Floorspace8,50x1,80 m Extra SpecificationsWith filter installation, 3x fan, total dimensions 6200x2300 mm, height 2820 mm, with inlet and outlet.The filter unit is equipped with 2 heat exchangers.Fluid bed dryers continuousTricom FrimafraDryer ...

General SKU379W1588 LocationBarneveld MakeTrivac TypeD65B Mach.No.11296 20200007866 Main Features MaterialStainless steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 230/400 volt, 1390/1695 rpm Information Year of construction2005 Total height0,40 m CEcheck Floorspace0,80x0,40 m Weight90 kgVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Control screening machine Tripette & Renaud model 21 M2 Conical strainer basket 300-360/ 800 Power 3 kw V-belt drive Wire covering MW 1.2 Outlet funnel is included Good condition

Inv. Num. : 8874 Type: TRIATHLON 1487 V Producer: HOLZHER Created: 2003 Parameters: Binding height: 55 mm Machine dimensions: 7500 x 1300 x 1800 mm

Laminator Triplex solventbased  Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min

Demonstration machine:Technical data:Grinding width 450 mmmax. Workpiece thickness 125 mmmin. Workpiece thickness 8 mmFeed infinitely variable 2-6 m/minGrinding roller diameter 82 mmSanding belt dimensions 457 x 1003 mmMotor output power 3 kW S6 (2.2kW S1 100% ED)Suction nozzle 100 mmDimensions L x W x H 1030 x 1000 x 1740 mmWeight 215 kg

This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine.

TRIA GRANULATOR XT 9042, (machine offered totally reconditioned - photos taken before reconditioning), 900 mm wide rotor, Infeed dimensions : 1000 x 550 mm., Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, now mounting a 12 mm.screen, prepared for extraction through blower, control panel, constructed in 2016, information given by previous owner, the machine is offered totally reconditioned with new knives and general reconditioning, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber ...

General SKU408X1220 LocationBarneveld CEcheck MakeTrivac Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 200/400 V 3~, 1450 rpm Hydraulic drivecheck MakeOerlikon TypeAR 40-65 Mach.No.18922 Year of construction2016 InletDN40 KF OutletDN40 KF Information TypeD65B Mach.No.31001371345 Year of construction2016 Floorspace0,80x0,50 m Total height0,50 mVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

TRIA type 32-20 / JM granulator / crusher in excellent condition New engine installed last month Year: 2010 Shredding chamber dimensions: 320 x 200 mm Power: 4 kW / 5.5 hp Fixed blades: 2 Rotating blades: 3 Rotor diameter: 180 mm Hourly shredding capacity: 40 to 60 kg