krones filler used for sale

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine

Krones Contiform S 12 with 12 cavities Capacity: approx. 18.000 bottles/hour on 2,0 litre bottles Year of manufacturing: 2006 Operating hours: only approx. 38.000 hours Including Gardner Denver Belliss & Morcom compressor WH29H3N with dryer and air receiver Bottle neck finish: 1881 The machine is currently still in production and will run until August 2026 Dismantling and removal must take place at the beginning of September 2026 Location: United Kingdom

Overview  This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Capacity: 30,000 bottles/hour (500 bottles/min) Sleeve Applicators: 2-head sleeve feed system Shrink Tunnel: Steam-operated (Shrinkmat) Bottle Formats: 300 ml / 500 ml / 1,500 ml Condition: Very good, low operating hours Operating Hours: 1,563 Scope of Delivery Krones Sleevematic sleeve applicator 2-head sleeve feed system Shrink tunnel (steam) Bottle format parts for 300/500/1500ml PET bottles

Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system  

Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

Bottle filler with great Division for special filling

with 130 filling valves and 26head crown corker Year of manufacturing: 1994 capacity: approx. 50.000 bph Control system to Siemens S7 - 02/2011 Reconstruction capper to crown cork and Twist off, both is possible without conversion of the capping elements

Pressure filler Krones Mecafill type: VK2V K126-308 with 96 filling valves and 18head crowner with short filling tubes with double pre-evacuation with HDE (hot water injection) complete reconditioned in 2009 by company Krones clockwise direction - from left to right capacity: approx. 35.000 bph by 300 ml softdrinks products: beer, alcohol free beer, long drinks, cocktails, cider, softdrinks, carbonized water, still water with Siemens S7-300 PLC and HMI touchpanel including all available spare parts The filler is still in production until September 2025 and can be inspected during procduction

Krones can filler blocked with Ferrum can seamer Krones Mecafill with 30 mechanical filling valves Year of manufacturing: 1991 Ferrum can seamer F 308 R (with 6 seaming heads adapted / modified by Imetta / Italy that the can plates are also turning with the machine). Capacity: approx. 14.000 cph by 500 ml standard cans approx. 18.000 cph by 330 ml standard cans can type: standard cans / can type: 211 / 202 with Siemens S 5 with CO2 injection system before seaming The machine was in production until October, 15th 2025 in a brewery in "South Tirol" / Italy. It was professionally dismantled by a German comany and it's now on our stock

Glass bottle filler Krones 66 / 11 with 66 filling valves and 11head screw capper year of manufacturing: 1997 Capacity: 22 000 bph by 0,5 ltr. bottles 24 000 bph by 0,33 ltr. bottles with 66 filling valvesand 11head crown capper, short filling tubes work direction: left to right double evacuation system crown cork transport system with PLC Siemens S5, incl. changeover parts for 330 ml and 500 ml filling products: beer, alcohol free beer, long drinks, cocktails, cider, soft drink, carbonized water, still water The machine is still in production until January 2026 and can be inpsected.

Overview The Kosme / Krones Barifill is an isobaric filler that is currently in operation in a German brewery and can be seen in operation. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour and the rated speed of the manufacturer is 7,000 bph. The system is designed for 26 mm crown corks and has 30 filling stations. Technical details  Output: 8,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0,5 NRW 0,5 Longneck 0,5 Lochmund 0,33 ALE 0,33 SUD 0,33 Steinie Bügel Filling stations: 30 Electrical specifications: Max. Voltage: 3x400 V + N + GND 50Hz Power consumption: 13,00 kW Operating hours: 18393 (March 2025) Spare parts included: Drives Gearboxes Cardan Shaft others Serviced by Kosme/Krones each year Lifting cylinders in 2024 Valves and capper in 2025 Features: Bottle shower High pr ...

Consisting of: - Rinser 20 nozzles - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Technical Specifications & Performance Data The Used Can Filler Krones 50V and Seamer Angelus 62H up to 30000 cph is a robust filling monoblock designed for high-speed beverage production in aluminum cans. As a second hand solution from a leading OEM, it suits operators upgrading a used bottling line in industrial packaging environments. Monoblock configuration: Krones VCC-50-136 can filler with Angelus 62H can seamer Manufacturer and year: Krones, 1996 Production speed: up to 30,000 cans per hour Filler: 50-valve isobaric filling carousel for carbonated beverages Seamer: Angelus 62H, 6 heads, for 202 ends with 211 body compatibility Container type: aluminum can Formats handled: 0.35 L and 0.55 L Product types: soft drinks and other carbonated beverages Electrical: 575 V, 60 Hz, industrial panel with operator interface Condition: in production, ready for integration into a used bottling  ...

Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic ...

CAP.: 10 000 L/H

Tray labels

We offer the labeler after comprehensive overhaul and modernization (including cabinet). The machine is designed for bonding three paper labels on glass bottle. Implementation of fully stainless steel. Labeller is equipped with two stations: - adhesive label front, neck and back label. Scanning system and label transfer is based on the pallets, which select a label from a magazine, transfer it onto the gripper drum and then onto bottle. The machine is extremely stable and reliable. Support comes down to refill glue and charge labels into magazine. Capacity: max. 24 000 b/h. We provide 1 set of equipment designed for a customer bottle. Machine has full 12-month warranty.

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

fully automatic Wasserentgaser, CIP capable, autom. Valves, Hilge pump, Sihi vacuum degassing, 40,000 litres / h

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

Model: KRONES Solomatic Type: K018-xx1 model: 1200-25-480-6-5-160 Year of construction: 2003 Capacity: 36,000 to 40,000 fl./h Running direction: Left machine Feeding: Linear, straight Unit: fuselage PWL300, back PWL300 Glue roller: Steel glue roller Guide: 1x inlet star, 1x outlet star Label-L=: min. 40mm, max. 160mm Bottle-D=: min. 50mm, max. 125mm Voltage: 220/380 V Tags: Torso, Chest, Back Machine dimensions : 2.80 x 2.85 meters. The dimensions refer to the base frame without procors of the units and spout extension, as well as electrical cabinet (80x40x240cm). Price ex location: "As Is" Condition please inquire Price ex location: in refurbished condition on request.

KRONES Canmatic Running direction: left Continuous linear/normal Performance about 40,000 bottles / HR Including format sets for 1.5 liter, 1.0 liter, 50cl. and 33cl PET bottle Spray system by ROBATEC The machine is in good condition and is available from November 2015.

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

Krones Solomatic Right-to-law machine Ma-No. 018-D53 Torso-chest back labeling Hot melt device for sealing labels Central lubrication Height GDB program + 0.75 / 0.25 excl. Gluing via lifting motor 2 label magazines 2 aggregates external control cabinet Heuft Spectrum TX with Pusher Format parts, gripper heads and screws available Krones Solomatic Right-hand machine Ma-No. 018-D53 Body-chest-back labeling Hot melt gluing device for sealing labels Central lubrication Height adjustment GDB program + 0,75 / 0,25 excl. Gluing via lifting motor 2 Label Magazines 2 aggregates external switch cabinet Heuft Spectrum TX with pusher Format parts gripper heads and screws available

Year of Make: 2007 Capacity: 60 tact./min.

Used machine: Kettner / Krones Blitzpac JUNIOR – carton and crate packer with 3 packing heads Manufacturer: Kettner / Krones Model: Blitzpac JUNIOR Capacity: up to 300 cycles per hour Packing system: 3 packing heads Efficient packer for cartons and crates The used Blitzpac JUNIOR packaging machine is a proven solution for the automatic packaging of bottles or containers in crates and cartons. It is ideal for medium-sized and large bottling companies in the beverage or food industry. Technical features: • Robust design for continuous operation • 300 cycles/hour – high efficiency in the packaging process • 3 packing heads for flexible handling of different formats • Compatible with common crate and cardboard dimensions • Proven Krones/Kettner quality Applications: • Beverage filling (beer, water, soft drinks) •Food industry • Packaging of bottles ...

Used blow moulding machine made by KRONES model Contiform S18. New 2004. It has 18 blow moulding stations. The maximum blow moulding speed is 24,000 bottles per hour for the 2.0 l format and 28,000 bottles per hour for the 1.5 l format. In February 2024, the machine was upgraded to support the PCO 2622 thread. The blow moulding machine has an integrated control system with visualisation in Polish, English and German. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic glycol cooler, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air transport conveyor.

Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension

Model: 1240-20-6-4-180 Year of construction: 1996 Capacity: 8000 direction: right machine Feeding: Linear - straight Aggregate: Agg. 1: 6pcs PWL 370, AGG. 2: 4pcs PWL 210 Aggregate self adhesive: 2 x Glue roller: Steel Management: 1 x capsule infeed star orientation, 1 x outlet star Voltage 230/400 V Etikettenl: Hull, back Machine dimensions: B = 2, 90 m, L = 2, 70m, H = 2, 40 m

Complete non-returnable glass bottling line for hot fill and cold fill Krones / KHS Capacity: up to 33.000 bph by 500 ml glass bottles (the capacity depends on the product, the product temperature and CO2 content) Products: juices like orange juice, apple juice, tomato juice, etc. but also cold fill products like CSD with CO2 Bottle sizes: 250 ml - 1000 ml Capping type: 28 mm aluminium 33 mm aluminium twist-off cap 43 mm aluminium twist-off cap (the twist-off capping machine is included in the scope of supply) Labelling: paper labels with cold glue on the bottle Packaging: wrap around packaging (full carton) or tray packaging but without foil shrinking station Depalletizing and palletizing: full automatically Year of manufacturing: 1999 - 2007 This line was in production until end of 2025 in a German fruit juice and CSD company. It is stil ...

Aggregate repairs for any type of KRONES cold glue aggregate. Any spare parts for cold-glue units. Please enquire. We offer complete overhauls in-house at fixed prices within a week.

PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors

Manufacturer: KRONES Type: K405-xxx Model: 960-16-5-5 YOB: 2003 Performance: 16,000 bottles/hour Running direction: RM clockwise feeding: linear - straight Aggregates: Agg 1 PWL460, AGG 2 PWL 300, AGG 3 donation unit Bottle table: servo Guiding: 1 x retaining infeed starwheel, 1 x discharge retaining starwheel Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, wrap around Machine dimension: L = 3, 00 m x W = 2, 20 m without partly overlapping of the unit and discharge extension.

PET-Filler-Rinser-Bloc, make Krones, type: Variojet / VKS-120/10, with 55 rinsing sites, with 120 filling valves and 10-head screw capper, with large pitch, for up to 2,0 liter bottles, built 1992 / 2001, already dismantled.

Type: K728-1xx Model: 720-12-4-4 YOB: 1997 Performance: 18,000 bottles/h Running direction: clockwise feeding: straight parallel Aggregates: Agg 1 PWL 370, AGG 2 PWL 300 Bottle table: cam Guiding: infeed 2 x, 1 x discharge Label L =: min. 40mm, 130mm Bottle diameter: min. 50mm, 110mm Bottle height (H): min. 150mm, 350mm Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, neck Machine dimension: L = 2, 40m x W = 2, 30 m without partly overlapping of the unit and discharge extension.

KRONES Air conveyors used- in very good condition Price: Euro 475,-- / per meter Complete with cable, stand, motor

Krones Contiroll HS Labeller 50 000 b/h

Krones Canmatic labeling machine Capacity: 24,000 b / h

Modular station Krones Contiroll HS

1. Qty. 1 Second-hand labeller Mfc.: Krones Type: Universella 723-931 Built: 1993 15 labelling stations Number of labels: 8 labels per bottle Number of grippers in the cylinder: 6 Capacity: 18 000 Btl./h Size of bottles: 0.5, 0.7, 0.75 & 1.0 Ltr.

2. Qty. 1 Second-hand labeller Mfc.: Krones Type: Universella 723-844 Built: 1991 10 labelling stations Number of labels: 4 labels per bottle Capacity: 12 000 Btl./h Size of bottles: 0.5, 0.7, 0.75 & 1.0 Ltr. 2 glue stations

Labeling machines fully automatic Krones Etima Solomatic Machine Krones Labeliernaschine Solomatic Chest torso back 3- leimagregate 3- cold glue pump Power 28,000 FL/h Control Siemens S7

Cardboard packer with 3 heads

1987 Krones Starmatic with many parts

For sale: electrical cabinet producer Krones 400 V 50 Hz 103A ICW/ ICU : - / 35k A

PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Closing heads Krones for aluminium screw caps suitable for several types of closing machines like Alcoa, Adelski, Arol, etc. tested and ready to work