krone used for sale

Krone VarioPack V1800 MC with tandem axle, tyres 19.0/45-17, two conductors compressed air system, net binding, 17 knives rotor header with knife group circuit 17/15/7/0, hydraulic to swing out, variable bale chamber from 1 - 1.8 m wide pick-up, five-tine row pick-up, bar chain elevator with automatic tensioning device, low drive power due to simple construction and ease of movement, toothing effect leads to maximum rotational reliability of the bale even with short/wet forage, press pressure indicator incl. Left/right direction indicator for even bales. Headquarters Chain lubrication, comfort operation. This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the info ...

Towing jaw: K80 ball head ; Including PTO shaft ; Krone round baler CV 150 XC X-treme version, rotor header 26 blades, knife group switch 13/13, reinforced Novo-Grip rod belt elevator, roller hold-down, net binding, Delta comfort electronics, tandem axle, two conductors DL brake system, tires 620/40-22.5 Tyres, double arm wrapper with 750 foil stretching, with WW drive shaft, with K80 Ball Head Hitch with Bottom Hitch, Unadjusted Tine Pickup, Hydraulic Support leg STVO Lighting, Central Chain Oiling, Grease Central Lubrication Points, Storage Cloth, Total Bale Number 13656, Wrapped 6373 Dimensions: L x W x H 7100 mm x 2600 mm x 3300mm This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given ...

This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-152

Crown Comprima F125 XC Round baler Krone Comprima F125 XC - , bale chamber fixed, lowerable cutting floor, cutting rotor, 26 blades, net binding, cutting unit, roller hold-down, WWGW, Central lubrication, tires 500/55-20, hydraulic brake system, 25 km/h ; This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-5

With quick blade coupler and wide distributor. This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-14

nameplate not readable ; This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-21

Crown Comprima V150XC with 17 knife screams, approx. 27500 bales Pressed, Hydraulic Swivel Floor, Hydraulic System, Beta Comfort Control, 19.0/45-17 AS Tyres, Mesh Binding, Unsteered EsayFlow Pick up with Tracking Wheels, Roller Hold-Down, Tool-Free Height adjustment, cutting and conveyor rotor with forced cut for the best cutting quality, single knife safety, hydraulically lowerable knife cassette, knife grinding, V-shaped Tine arrangement, NovoGrip roller floor. Central chain lubrication Auction-ID: A1-47343-158

This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-16

31851 bales; Krone VarioPack V1500 MC with tandem axle, tyres 15.0/55-17, two conductors compressed air system, net binding, 17 knives rotor header with knife Group circuit 17/15/7/0, hydraulic for swinging out, roller hold-down, five-tine row pick-up, rod elevator with automatic clamping device Low drive power due to easy removal and easy movement, toothing effect leads to maximum rotation reliability of the bale even with short/wet fufter, press pressure indicator incl. left/right direction indicator for even bales. Headquarters Chain lubrication, comfort operation. Auction-ID: A1-47343-159

This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-19

Technical details Manufacturer: Krone Model: DA06 Type: Curtainsider semi-trailer with tarpaulin Year: 2017 Identification number (VIN): WKESD000000755222 Ownership: First owner (purchased new) Axles: 3 Maximum authorised weight: 39000 kg Maximum authorised payload: 32389 kg Fifth-wheel load: 12000 kg Maximum authorised rear axle load: 12000 kg Unladen weight: 6611 kg Dimensions: - Length: 13860 mm - Width: 2550 mm - Height: 4000 mm Configuration: - Curtainsider body with tarpaulin - Three-axle trailer configuration - Pallet box included Application: - General freight transport - Palletised goods transport - Logistics and distribution operations - International and domestic road haulage Condition: Used Observed condition: - First-owner trailer - Reported in good working condition - Operated only for external/community transport - Tyres reported approximate ...

This trailed rotary rake from Krone is a robust and reliable machine for efficiently raking grass, hay and straw. It is a Krone Swadro 461, built in 2004, equipped with a single rotor with double tine arms and a working width of approximately 4.60 meters. Thanks to its solid construction and proven Swadro concept, this rake is known for neat swath formation and high capacity during harvesting operations. The machine is equipped with a transport chassis, PTO drive and an adjustable swath screen, allowing the crop to be accurately brought together for further processing. The rotor has multiple tine arms with double spring tines that ensure even crop intake and a clean raking result. Thanks to its compact construction and good manoeuvrability, this rake is suitable for both smaller and medium-sized farms. Visually, the machine is in used condition with normal signs of wear commensurate wi ...

This Krone EasyCut AM 283 disc mower is a robust and reliable machine for efficient mowing of grassland and forage crops. Thanks to Krone's proven EasyCut cutting system, this mower guarantees a clean cut, a smooth crop flow and a high capacity under a wide range of conditions. The machine has a working width of approximately 2.80 meters and is equipped with a heavy cutter bar with several cutting discs with freely rotating blades. The side suspension ensures that the mower follows the soil contours accurately, resulting in an even cut and limited contamination of the crop. The mower is equipped with a protective tarpaulin over the full working width and can be folded up compactly for transport. According to the nameplate, it is a Krone AM 283 CV. However, the machine is offered without a conditioner unit, which makes it function like a conventional disc mower. This makes the machine p ...

This Krone EasyCut 320 CV is a mounted disc mower with integrated conditioner, designed for efficient and high-quality mowing of grassland and forage crops. Thanks to the working width of approximately 3.20 meters and the conditioner device, the mowing and pre-drying of the crop is combined in one pass, resulting in faster drying and a more efficient harvesting process. The machine is equipped with a robust mowing bed with several mowing discs, a side mounting construction and a mechanical soil relief via spring system. The protective cloths are present but show wear and damage. The mowing bed, drive and construction show normal signs of wear appropriate to age and use. Based on the available photos, the machine seems to be fully equipped with PTO drive, conditioner and protective caps. The general condition has been used, with visible wear, paint damage and superficial corrosion on va ...

Equipped with tow bar; removable side panels; tailgate; PTO drive Auction-ID: A1-42630-361

Refrigerated trailer with cooling engine, rear axle steered, hydraulic tailgate. Auction-ID: A1-42630-217

swap body, manufacturer Krone Length approx. 7.45 m Removable swap body on support legs Roller shutter at the front Interior with lashing/perforated rails on the side walls Used condition with age-related wear and corrosion Auction-ID: A1-47153-2120

Used KRONES - KHS 60,000CPH complete CSD lineTechnical Specifications & Performance DataThis used bottling line is a high-speed, complete canning solution for carbonated soft drinks, engineered with premium components from Krones, KHS, Ferrum, and other leading manufacturers. It delivers robust performance for industrial packaging and beverage production, combining dependable filling, seaming, pasteurization, and end-of-line automation for second hand operations seeking reliable throughput.Production speed: up to 60,000 cph (0.33L); recently running at 53,700 cph (0.5L)Container type: Aluminum cansFormats: Compatible with 0.33L and 0.5L can formatsMain equipment: KHS Innofill EMD 108S can filler; Ferrum F812 seamer; KHS Innopas tunnel pasteurizerInspection: Krones Checkmat and additional fill height inspectionPackaging: Kisters tray and shrink packing (overhauled 2015), Krones Robobox gr ...

Technical Specifications & Performance Data The Used Complete Bottling Line Krones, from the year 2015, is engineered for high-efficiency operations within the beverage production industry. Designed to process up to 48,000 bottles per hour, this second-hand machinery is ideal for medium to large-scale production needs. Production Speed: 48,000 bottles per hour Compatible Bottle Formats: 0.38 L, 0.55 L Container Types: PET Neck Type: 30/25 Machine Components: 12 items Advanced Automation & Control Systems This used bottling line is equipped with advanced automation capabilities and a user-friendly control panel, ensuring high precision in filling, labeling, and capping processes. The line includes integrated safety features, adhering to stringent industrial packaging standards, making it a reliable asset for operators. The electrical systems and automation technologies ensure streamlined  ...

Technical Specifications & Performance Data Line type: Used complete bottling line (second hand) configured for PET still water Manufacturers: Krones and Gebo Cermex Year of build: 2013 Nominal speed: up to 31,500 bottles/hour (0.35 L and 0.50 L) Bottle formats: 0.35 L, 0.50 L Container type: PET with 29/25 neck Product type: Still water (non-carbonated) Main modules: Krones Contifeed preform feeder, Krones Preform Check Inspector, Krones Contiform stretch blow molder, Krones ErgoBloc L 40-15 blow–fill–cap monoblock, Krones Checkmat cap inspector, Krones Contiroll roll-fed labeler, Gebo Cermex shrink wrapper, Gebo Cermex case packer Line condition: In production Documentation: OEM manuals available Safety: Safety features and guarding included Advanced Automation & Control Systems This used bottling line leverages Krones’ integrated line control for synchronized blow moldi ...

Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 ...

Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomod ...

Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a s ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Q ...