krone used for sale

Krones Lavatec Year of Make: 1999 Output: 24,000 bph. Retrofit: 2014

Krones Variopac Pro FS 45 Type: Film only Output: 45 cycles/min. Year of Make: 2008

Krones Pressant Universal Year of Make: 2020 Neuglass Pusher Output: Operates at 45,000 bph

Krones Topmatic Year of manufacture: 2018 Output: 45,000 bottles/pc / 500ml

1 of used blow-moulder, make Krones, type Contiform S12, new 2006. With generic moulds for 2.0, 2.5 and 3.0 liter PET bottles with 1881 neck finish. Capacity 18.000 bph on 2.0 liter. With pre-form feeder and Gardner Denver Belliss Morcom high-pressure compressor type WH29H3N with air dryer and receiver. Operating hours approx. 40.000. In operation through August 2026. Also available from the same line: pneumatic conveyors, Krones rinser/filler/capper tribloc, Ocme Vega film-only shrinkwrapper, interconnecting bottle and pack conveyors.

Used juice bottling line. LINE WITH A CAPACITY OF UP TO 12,000 BOTTLES/HOUR – production capacity for 330 ml bottles 1. Round bottle with a capacity of: - 250 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 330 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 750 ml - line capacity 5,000 bottles/hour - round bottle 2. Twist-off cap: - diameter 43 mm - diameter 38 mm 3. Label types: - cold glue (two-piece) Line configuration: 1. DNB-15 semi-automatic bottle depalletizer. 2. PBSz – 01 - 40 bottle rinser. 3. STORK VS 32 bottling monoblock. 4. AUTOMATIC TWIST-OFF CAPSULATOR with steam injection function, automatic, in-line capping machine (capsulator) model GG100. 5. KRONES BONOMATIC rotary labeler for cylindrical products. 6. VENUS APB-15 automatic bottle packing machine. 7. Videojet CIJ printer – model VJ 1620 8. LOB- ...

Krones bottle washer built in 2001 676-039 6000 bottles/h 0.2l-1.0l bottles Machine will be available in December 2026

Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel

A wet glue rotary labeling machine Krones for bottles is available. Bottle formats: 1l/0.75l. Including various format parts and variable label magazine. An on-site inspection is possible.

Krones AG Smartpac / Smartpak U 1400 T Unpacker Efficient Unpacking Solution for Beverage Production Lines General Information Manufacturer: Krones AG Model: Smartpac / Smartpak U 1400 T Machine Type: Unpacker (Depalletizing / Case Unpacking System) Factory Number: KR66147 Year of Manufacture: 2011 Technical Specifications Nominal Voltage: 400 / 230 V Machine Size: 1400 (single-column design) Output Capacity: up to approx. 520 cycles/hour (depending on configuration) Machine Overview The Krones Smartpac U 1400 T is a single-column unpacking machine designed for efficient and gentle removal of containers from crates, cartons, or trays. It is part of the proven Smartpac series, widely used in beverage production for its flexibility and reliability.

Height=0.94 m, Overall length= 0.85 m, Overall width= 0.59 m, Net weight= 191 kg,

Height=0.92 m, Overall length= 0.93 m, Overall width= 0.86 m, Net weight= 166 kg,

Height=1.65 m, Overall length= 1 m, Overall width= 4.06 m, Net weight= 504 kg,

Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

· Krones Monobloc VK2V 066-103/KK, serial number K090031, built in 1999, capacity 24,000 bottles per hour. · Krones labeller, model 720-18-86-130, serial number K090-C31, built in 1999, output 28,000 bottles per hour. · ZM Jerzy Robak, rinser, model PBSz-01-60, serial number 3.184, year of construction 2014. · Fischer pasteurizer, model 10Pl, serial number 99096, year of manufacture 1999. · Krones crate washer, model KKW-50, serial number 690-095, built in 1995. · Krones crate packer and unpacker, model Linapac, serial number K462-137, built in 1999. · Krones bottle washer, model KES-1-1-190/19-80, serial number 671-214, built in 1998, capacity 28,000 bottles per hour. · Krones conveyor belts with associated control cabinets and control panels

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

with 2 stations photo-oriented working direction: left-right Capacity: 8000 bph

Consisting of: - Rinser 20 nozzles - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Overview This self-adhesive labelling machine was manufactured in 2011 by the German company KRONES. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. We dismantled it properly and store it in our warehouse.    Technical data Labelling method: Self-adhesive Capacity: Up to 42,000 bottles/hour Number of Autocol stations: 6 Bottle formats: 0,25 l Heineken 0,33 l Heineken Food 0,65 l Heineken 0,33 l Desperados 0,65 l Desperados

KRONES Contiform 312 – PET Blow Moulding Machine (Year 2019) High-performance PET blow moulding machine designed for efficient production of PET bottles for beverage applications. The KRONES Contiform 312 features advanced 3rd generation blow moulding technology, combining high production capacity, energy-efficient infrared heating, and servo-driven stretching for precise bottle quality. The machine is currently still under power and available for inspection. General Information Manufacturer: KRONES Model: Contiform 312 Year of Manufacture: 2019 Condition: Still under power Documentation: Manuals available Technical Specifications Production Capacity: 24,000 bottles per hour Blow Moulding Cavities: 12 Bottle Neck Finish: 38 mm Conversion to 28 mm neck finish possible by buyer Bottle Formats / SKU Volumes: 235 ml 780 ml Operating Data Working Hours: approx. 5,300 ...

Kronen KUJ Cube Cutter Vegetable Slicer Machine in very good, well-maintained and rarely used condition with 5x5mm and 10x10mm pair of cutting rollers with shelf trolley for the cutting rollers as well as tools for changing and removing Video of the test run and more pictures available

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) Application: Depalletising of new glass containers Configuration: Z-arrangement with pallet infeed and upper-level container discharge Pallet handling: Pallet lifting unit with automatic empty pallet discharge Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Sweep-off system: Four-sided centring carriage, servo-driven Layer handling: Integrated handling module with suction gripper system for layer pads and top ...

60,000 CPH 330ml, 500ml 200/211

Overview The labeler was manufactured in 2012 by the German manufacturer Krones. The machine was regularly maintained by OEM and is still in operation till early 2027. As the selling mineral water company is receiving a completely new bottling line, they are selling the used machines of their current line, which are still in good shape. With the two labelling stations, the machine can label front, back and neck. A date coder is included and installed on the machine. Technical Details Output: 20,000 bph Formats: 0,25l Vichy 0,5l 0,7 and 0,75l GDB and Schlegl Pitch circle diameter: 600 mm No servo drive of the plates Infeed and output direction 90° Rotation: counter clockwise 36,000 operating hours Glue pumps included working direction: counter clockwise

Overview This Krones Robot 3A unloading robot, manufactured in 2003, is designed for the automatic handling of full beverage crates on Euro pallets. The system is used for unloading complete crate layers from pallets. The machine handles actually 1.0 l PET crates in an 8-crate layer pattern and is configured for crates with dimensions of 400 x 300 x 310 mm on Euro pallets measuring 1200 x 800 x 144 mm. During operation, a mechanical gripper head lifts a complete layer of beverage crates from the pallet and transfers it horizontally within the unloading area. The system is equipped with an MTS 10 operator panel, showing program operation and pallet handling status. The working area is protected by safety fencing and access doors. Technical Data Manufacturer: Krones AG / Kettner Machine Type: Robot unloading system / crate depalletising robot Machine Designation: Kettner Robot 3A Year of M ...

Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical ...

Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data Capacity: 40,000 bph (at 0,25L) Bottle Formats: 0.25L, 0.33L, 0,5L Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  Application: beer, CSD, or other beverages in non-returnable glass bottles Hygienic design Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or ...

Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                         ...

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

Inspection machine for detecting damage and contamination in glass bottles, as well as for identifying foreign bottles., Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

Labelling machine for applying paper neck, chest, belly and back labels to glass bottles using cold glue labelling., Additional title: cold glue labeling, Nominal capacity of filler: 50000 b/h, Formats: Neck-/ breast-/ body-/ back-labels, Running direction: left -> right, Operation / Control: Siemens S5, Features: 2 cold glue stations

Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h, Additional title: Bottle washing machine, Capacity: 39000 Bottles/h, Length: 12700 mm, Width: 4700 mm, Height: 3500 mm, Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW, Operation / Control: Simatic S7-300, Position: free standing, Base construction: Single-end machine, self-supporting housing on dome feet, Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station, Layer patterns: 22 bottles per basket row

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

Overview This sleeve labelling and shrinking system was manufactured in 2017 by Germany Krones. The system consists of a Krones Sleevematic sleeve applicator and a Krones Shrinkmat shrink tunnel, designed for the application and shrinking of sleeve labels on bottles and containers of various formats. Technical data Formats: Various bottle and container formats Application: Sleeve labelling and sleeve shrinking Configuration: Krones Sleevematic sleeve applicator + Krones Shrinkmat shrink tunnel Labelling technology: Sleeve labels Scope of Delivery Sleeve applicator | Krones | Sleevematic | 2017 | Sleeve label application machine Shrink tunnel | Krones | Shrinkmat | 2017 | Sleeve shrinking system

Overview:  The ALWID KRONE-D is a semi automatic dosing filler. The machine is suitable for volumetric filling of not carbonated liquids (low viscosity up to high viscosity) for the pharmaceutical, chemical and food industry. Procedure: The ALWID KRONE-D is a semi automatic machine. The operator places the bottles on the height-adjustable worktable manually and presses the START switch at each filling valve. That way, also single bottles can be filled. As soon as the START switch has been activated, the filling valve moves down and opens. The bottle is filled. Then the filling valve closes and automatically moves up, when the adjusted volume has been reached. Now the filled bottle can be removed.The machine can be used for several different liquids, bottle shapes and bottle sizes without requiring additional format parts. As the construction is solid and clear, the format change only n ...

KRONES ROUND GLASS LINE Features: • Year 2003 • 500/600BPM @ 700ml, 750ml, 1 Litre • Wraparound Boxes • 6 & 12 Pack • Cold Glue Front, Back & Tax Strip Labeller Asset List: 1 Waste compactor; 2006; Orwak; 9020; 54414; 415/50 2 De Palletiser; 2003; Krones Kettner; Prress Uni Abscheiber;22/0142/012; 415/50 3 Rinser 72 heads; 2003; Krones; Variojet; K563-291; 415/50 4 Filler 108 heads; 2003; Krones; Isofil; 2880 072-126; 415/50 5 Capper 18 heads; 2003; Krones; Topmatic/ Zalkin; 734-203; 415/50 6 Label check; 2015; Logics & Control; Logilook; 2359; 240/50 7 Case packer; 2003; Krones Kellner; Wrapapac W60; K95-044; 415/50 8 Laner; Krones; Multidivider 9 Robot; 2003; Krones/Kettner; Robogrip Entlander; 22/0795/008; 415/50 10 Spiral Case Elevator; Amberflex; 415/50 11 Bottle coder; 2017; Linx; 7900; AN135;240/50

Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 19 ...

Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robust ...

Overview This isobaric PET bottle filling and capping machine was manufactured in 1996 by German company Krones. The block machine includes an ALCOA capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 132 number of capping stations: 30 isobaric filling system suitable to carbonated soft drinks capping system: ALCOA Kupi 30/1080 for screw caps  cap feeding system: Gassner  capacity: 36.000/h at 1,0L  including neck handling system  bootle lifting cylinders direction: left-right / clockwise

Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. Th ...

Used combiblock KRONES contiform S8 + mecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: Clockw ...

Used blow molding machine KRONES CONTIFORM 310 PRO year 2020 Structure and Production Capacity The Used blow molding machine KRONES CONTIFORM 310 PRO year 2020 operates with 10 rotary blowing stations, specifically engineered for the continuous production of PET containers. Consequently, the machine delivers a maximum output of 18000 bottles per hour, providing high throughput even during demanding operations. It efficiently processes bottle formats of both 0.5 liters and 2 liters, ensuring flexibility in production. Heating System and Preform Handling The system uses a type 06 heating module with a 36.4 mm chain pitch, designed to process preforms with neck ring diameters up to 35 mm. As a result, it handles a wide range of packaging formats. Eleven heating elements raise the preform temperature, while motorized reflectors adjust their height to optimize energy use. Moreover, a dedicate ...

Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thr ...