119,374 used machines on RESALE, but how to find them? Machine Search
Two twin machines available Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a return lock and an open nozzle. Closing system: Clamping force: 5000 kN Mold opening force, max.: 280 kN Movable pressure plate Sliding force Opening: 137 kN Movable pressure plate Sliding force Closing: 116 kN Mold plate size (hxv): 1270mm x 1200mm Distance between columns (hxv): 900 mm x 800 mm Mold opening stroke: 1170 mm Min. mold height: 480 mm Maximum opening path: 1650 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejection force: 92548 kN injection unit Screw diameter: 90 mm Injection pressure: 1742 bar Injection volume : 1953 cm³ Injection weight, PS: 1777 gr Injection rate: 649cc/sec Screw spee ...
Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 x 1250 Clearance between columns (hxv) [mm] 1120 x 1000 min./ max. mold height [mm] 600 - 2000 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 130 Injection volume [cm3] 6172 Injection weight [g] 5617 Injection pressure [bar] 1296 Dimensions and weight Net weight with control cabinet [t] 55 Dimensions (L x W x H) [m] 10.50 m x 2.65 m x 2.40 m
Krauss Maffei KM 125-390 C2+ injection molding machine Year of production - 1999 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit – Mold clamping force: kN 1250 – Mold opening force: kN 70 – Dimensions of the mounting plate (h x v): mm 745 x 770 – Clearance between columns (h x v): mm 470 x 470 – Mold opening stroke: mm 600 – Minimum mold height: mm 300 – Opening width: mm 900 – Ejector stroke: mm 150 – Ejector force forward/reverse: kN 22 / 10 injection unit – Screw diameter: mm 40 – Ls/D ratio: – 20 – Injection pressure: 1860 bar – Injection volume: cm3 204 – Inject ...
Clamping/injection matrix Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Shot weight [g] 1304 Injection pressure [bar] 1829 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 36 Dimensions and weight (approximately) Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6,91 m x 2,20 m x 2,41 m
Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2 Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878
Krauss Maffei KM 300-1000 CX injection molding machine Year of production - 2010 Fully hydraulic closing system. MC 5 control system with color monitor, integrated control panel and built-in disk drive. SP 1000 plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 50 mm, with a return lock and an open nozzle Nozzle radius 15 mm, nozzle opening 3 mm. Closing unit – Mold clamping force: kN 3000 – Mold opening force: kN 169 – Dimensions of the mounting plate (h x v): mm 995 x 1050 – Clearance between columns (h x v): mm 630 x 630 – Mold opening stroke: mm 820 – Minimum mold height: mm 330 – Opening width: mm 1150 – Ejector stroke: mm 200 – Ejector force forward/reverse: kN 58/28 injection unit – Screw diameter: mm 50 – Ls/D ratio: – 22.0 – Injection pressure: bar 2304 – Injection volume: cm3 432 – Inje ...
Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ″ control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 55 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2000 kN - Mold opening force: 101 kN - Mounting plate dimensions (h x v): mm 915 x 915 - Clearance between columns (h x v): mm 560 x 560 - Mold opening stroke: mm 700 - Minimum mold height: mm 350 - Opening width: mm 1050 - Ejector stroke: mm 200 - Ejector force forward / reverse: 58/28 kN Injection unit - Screw diameter: mm 55 - Ls / D ratio: - 20.0 - Injection pres ...
Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1530 x 1450 Clearance between columns (hxv) [mm] 1000 x 930 min./ max. mold height [mm] 400 / - Maximum opening width [mm] 1550 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1543 Injection weight [g] 1404 Injection pressure [bar] 2205 Electric-hydraulic equipment Pump motor rated power [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] approx. 45.7 Dimensions (L x W x H) [m] approx. 9.98 x 2.78 x 2.43
Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 600 x 600 Clearance between columns (hxv) [mm] 370 x 370 min./ max. mold height [mm] 200 / - Maximum opening width [mm] 600 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection weight [g] 35 Injection pressure [bar] 2500 Electric-hydraulic equipment Nominal power of the pump motor [kW] 11 Heater power [kW] 6.3 Dimensions and weight Net weight with control cabinet [t] approx. 2.7 Dimensions (L x W x H) [m] approx. 3.53 x 1.41 x 1.96
Krauss Maffei KM 110-520 C1 injection molding machine Year of production - 2004 Fully hydraulic locking system. MC4 control system with color monitor, integrated control panel and built-in disk drive Plasticizing system 1 complete plasticizing system for thermoplastics, abrasive version, 45 mm screw diameter, with backlatch and open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit: - Mold closing force: 1100 kN - Mold opening force: 70 kN - Movement force of the movable plate clamping the mold - - - opening: 35 kN - closing: kN 28 - Mounting plate dimensions (h x v): mm 745 x 770 - Clearance between columns (h x v): mm 470 x 470 - Way of opening the mold: mm 600 - Mold development height: mm 300 - Opening width: mm 900 - Ejector stroke: mm 150 - Ejector force: 22/10 kN Injection unit: - Screw diameter: mm 45 - Injection pressure: 1878 bar - In ...
MC5 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Mold clamping force: 1760 kN - Mounting plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Way of opening the mold max: mm 450 - Height of the mold development min./max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: 49 kN Injection unit - Screw diameter: mm 50 - Ls / D ratio: 20.2 - Injection pressure: 1892 bar - Injection volume: cm3 393 - Injection weight for PS: 357 g - Injection capacity: cm3 / s 314 - Number of screw revolutions, max: rpm 320 - Nozzle clamping force: 29.4 kN Electrical parameters - Connection value: kW 38 - Heaters power: kW 15.6 - Number of cylind ...
Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping force 6500 kN Tool opening force, max. 346 kN The size of the plates (height x height) 1620 x 1470 mm clearance between columns (height x height) 1000 x 930 mm mold opening path 1150 mm mold mounting height min. Opening width 540 mm 1690 mm Ejector stroke 250 mm Ejector force forward / reverse 226 kN Injection unit Screw diameter 90 mm Ls / D ratio 20 Injection pressure 1742 bar shot weight 1742 g Plasticizing flow max. 83 g / sec nozzle pressure 173 kN Electro-hydraulic devices Rated power of the pump motor 90 kW Installed heating power of 36 kW Cylinder heating control zones 7 Oil filling 1240 ltr. Dimensions and weights Space requirement approx. 9.06 x 2.85 x 2.60 m Gross weight is 30,870 kg Tool weight 11400 kg
Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1310 x 1200 Clearance between columns (hxv) [mm] 800 x 800 min./ max. mold height [mm] 580 - 1600 Maximum opening width [mm] 1020 injection unit Screw diameter [mm] 70 mm Injection volume [cm3] 1047 Injection weight [g] 953 Injection pressure [bar] 1778 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 30 Dimensions and weight Net weight with control cabinet [t] 22 Dimensions (L x W x H) [m] 6.38 m x 2.33 m x 2.48 m
KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Height of the form [mm] -600 Max. mold height [mm] -1150 Column spacing (hxv) in the light (mm) - 1000 x 930 Mounting plates size - 1490 × 1440 Ejector stroke (max) [mm] -250 Screw diameter [mm] -90 Injection weight [g] -2500 Oil quantity [liter] -1000 Injection sequence in mold -2 Number of hydraulic cores S / R- 0/2 The maximum distance between the plates [mm] -1500
Closing unit Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Injection weight [g] 1304 Injection pressure [bar] 1829 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 36 Dimensions and weight Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6.91 m x 2.20 m x 2.41 m Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380
Clamping force [kN] 20000 Dimensions of mounting plates (hxv) [mm] 2650 x 2400 Clearance between columns (hxv) [mm] 1870 x 1620 min./ max. mold height [mm] 800-1700 Maximum opening width [mm] 3600 injection unit Screw diameter [mm] 150 Injection volume [cm3] 11928 Injection weight [g] 8469 Injection pressure [bar] 1445 Electric-hydraulic equipment Pump motor rated power [kW] 160 Heater power [kW] 109 Dimensions and weight Net weight with control cabinet [t] 111 Dimensions (L x W x H) [m] 14.75 x 4.10 x 3.41
Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1270 x 1310 Clearance between columns (hxv) [mm] 900 x 800 min./ max. mold height [mm] min 480 Maximum opening width [mm] 1650 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1543 Injection weight [g] 1404 Injection pressure [bar] 2205 Electric-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 44 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (L x W x H) [m] 7.65 m x 2.55 m x 2.55 m
Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156 Shot weight [g] 142 Injection pressure [bar] 2429 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02
Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 x 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156
Krauss Maffei KM 420-3000 CX Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1232 Shot weight [g] 1121 Injection pressure [bar] 2389 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 29 Dimensions and weight (approximately) Net weight with control cabinet [t] 22,3 Dimensions (L x W x H) [m] 7,32 x 2,49 x 2,38
Krauss Maffei KM 150-520 C2 with the LR 100 robot Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 780 x 790 Clearance between columns (hxv) [mm] 500 x 500 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 7.1 Dimensions (L x W x H) [m] 4.66 x 1.51 x 2.19
Clamping force [kN] 800 Dimensions of mounting plates (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 25 Injection volume [cm3] 52 Injection weight [g] 47 Injection pressure [bar] 2500 Dimensions and weight Net weight with control cabinet [t] 2.2 Dimensions (L x W x H) [m] 3.3 x 1.2 x 1.9
Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380 Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 393 Injection pressure [bar] 2304 Electric-hydraulic equipment Pump motor rated power [kW] 75 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 6.79 x 2.17 x 2.25
Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19
Krauss Maffei KM 160-750 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Shot weight [g] 357 Injection pressure [bar] 1892 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] 4,6 x 1,6 x 2,1
Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Injection weight [g] 358 Injection pressure [bar] 358 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0
Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19 Additional equipment: Single-phase plastic feeder Picker
Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0
Clamping/injection matrix Clamping force [kN] 3500 Mounting plate dimensions (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 Min./max. mold height [mm] min 380 Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Shot weight [g] 393 Injection pressure [bar] 2304 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 6,79 x 2,17 x 2,25
Krauss Maffei KM 160-380 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 1250 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 201 Shot weight [g] 183 Injection pressure [bar] 1860 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] m 4,6 x 1,6 x 2,1
Closing unit Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 x 1530 Clearance between columns (hxv) [mm] 1120 x 1000 Min./max. mold height [mm] min 600 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 3367 Injection weight [g] 3064 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 90 Heater power [kW] 61 Dimensions and weight Net weight with control cabinet [t] 55 Dimensions (length x width x height) [m] 10.5 x 2.65 x 2.4 Hydraulic auger drive with permanent motor (with torque limitation in the upper speed range). The screw drive is adjustable on the monitor screen. For independent and parallel plasticization when opening and closing the mold, a screw drive with an electric motor or a second pump unit is used Single pneumatic valve on movable mold mou ...
Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0
Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0
Krauss Maffei KM 450-3500 C3 Closing unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./max. mold height [mm] min 480 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical and hydraulic equipment Rated power of the pump motor [kW] 90 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 26.3 Dimensions (length x width x height) [m] 7.98 x 2.35 x 2.51m Pressure tank for increased injection power. The screw is driven by an electric motor Air core Hydraulic core 10 x rotameters Euromap 67
Krauss Maffei KM650-5700CM Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1550 X 1440 Clearance between columns (hxv) [mm] 1000 X 930 Min./max. mold height [mm] min 600 Maximum opening width [mm] 1750 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 2956 Injection weight [g] 2111 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 39.5 Dimensions (L x W x H) [m] 9.36 x 2.65 x 2.43
Clamping/injection matrix Clamping force [kN] 5000 Mounting plate dimensions (hxv) [mm] 1270 x 1310 Clearance between columns (hxv) [mm] 900 x 800 Min./max. mold height [mm] min 480 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1543 Shot weight [g] 1404 Injection pressure [bar] 2205 Electro-hydraulic equipment Power rating of the pump motor [kW] 90 Power rating of barrel heating [kW] 44 Dimensions and weight (approximately) Net weight with control cabinet [t] 7.9 Dimensions (L x W x H) [m] 7,65 m x 2,55 m x 2,55 m
Clamping force [kN] 3000 Dimensions of mounting plates (hxv) [mm] 995x1050 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] min 330 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 523 Injection weight [g] 476 Injection pressure [bar] 1904 Dimensions and weight Net weight with control cabinet [t] 12.5 Dimensions (length x width x height) [m] 5.97 x 2.04 x 2.36
Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 490 x 440 Clearance between columns (hxv) [mm] 370 x 320 Min./max. mold height [mm] 150 - 450 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection weight [g] 35 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 6.1 Heater power [kW] 6.3 Dimensions and weight Net weight with control cabinet [t] 4 Dimensions (length x width x height) [m] 4.2 x 1.44 x 1.85
Closing unit Clamping force [kN] 1200 Dimensions of mounting plates (hxv) [mm] 640 x 590 Clearance between columns (hxv) [mm] 470 x 420 Min./max. mold height [mm] 180 - 550 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 201 Injection weight [g] 183 Injection pressure [bar] 1860 Electrical and hydraulic equipment Rated power of the pump motor [kW] 13.8 Heater power [kW] 11.5 Dimensions and weight Net weight with control cabinet [t] 6.9 Dimensions (length x width x height) [m] 5.3 x 1.6 x 1.88
Producer KRAUSS MAFFEI Type KM 250/1400 CX Year 2010 Clamping unit Clamping force 250 ton Opening stroke 820 mm Distance between tie bars 710 x 630 mm Mould height min. 480 mm Opening width 1300 mm Injection unit Screw diameter 55 mm Injection volume 570 cm³ Shot weight 519 g Injection pressure 2387 bar Measurements and weight Dimensions 6.1 x 2.2 x 2.3 m Machine weight 15000 kg
Seller: AMARON s.r.o.
Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg
Seller: AMARON s.r.o.
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
Seller: PLASTDECOR
Screw diameter; 105 mm Injectable volume: 3611 cm3 Injection pressure: 1580 bar Column width: 1000 x 930 mm Minimum mould thickness: 600 mm Opening stroke: 1150 mm Cores: 6 Robot Interface: Yes Options: Robot Interface 20 mold heating zones Sequential Injection
Seller: Surplex GmbH
450 € add to watchlist
Description: Machine number: 44314 Operating voltage: 400 V Frequency: 50 Hz Rated current: 50 A Closing force: 50 to Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 2,000 mm, weight approx.: 3,000 kg
Key data: 550 mm, 1200 mm
BERSTORFF GmbH Mixing mill for all types of rubber compounds Roll width 120 cm Roll diameter 55 cm Machine in very good condition !
Seller: B&A MACHINERY
B&A REF: 9024 TON: 160 SHOT WEIGHT: 343 SCREW DIAMETER: 50MM STROKE VOLUME: 3477CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR CIRCUIT: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE
Seller: B&A MACHINERY
B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES
Seller: GINDUMAC GmbH
This Krauss-Maffei 150-700 C2 Injection moulding machine was manufactured in the year 2003 in Germany. It is equipped with a clamping force of 1500 kN, a SP 700 injection unit with a screw diameter of 50 mm. Shot weight for PS is at 343g. See video gallery for more impressions. The injection moulding machine has 76901 cycle hours and 90924 machine on hours.
Seller: GINDUMAC GmbH
This Krauss Maffei 1300/14700 MC Injection moulding machine was manufactured in the year 1998. It is equipped with a Siemens S7 control unit. The machine has a clamping force of 13000 kN and a screw diameter of 130 mm. See photo and video gallery for more details.
Seller: GINDUMAC GmbH
This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced performance. Key features include a comprehensive electrical installation, a detailed locking unit, a robust machine bed design, and a state-of-the-art cooling system. Additionally, it includes a hydraulic ejector system and transport lock for safety and reliability. Operating instructions are available in Spanish and German. Seize the opportunity to buy this Krauss-Maffei KM 300-1400-390-3-CZ injection moulding machine for top-notch manufacturing efficiency. Contact us for more information.
