krauss maffei 150 used for sale

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

KRAUSS MAFFEI KM450-4500 CS PET (450 ton) year `2010 for PET preform Location : Korea

Krauss Maffei KM 50 / 160 C2 Operating hours approx. 47,500 Core train Operational data collection (function uncertain, was not used by us) Various power connections Screw diameter D=30mm Condition: good / Ready to use without funnel

Manufacture Krauss Maffei Type KM 350-1900C2 Year prod../ no. manufacture 2001/354332 Diameter of screw mm 60 Shot volume g 700 Presure bar 2420 Clamping force kN 3500 Mould fixing platen size mm 1060 x 1095 Distance between tie bars mm 710 x 710 Mould height - max. mm 380 Opening stroke mm 920 Max odległość pomiędzy płytami mm 1600 Control MC 4 Weight kg 16.000 Additional Hydraulics cores - 4 pcs. // Bottle with ntrogen

Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW

Used hydraulic pump, Voith IPH 5/64 gear pump, for sale in good condition. Capacity 92 l / min.

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

Key data: 110 , 198 , 40

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530160170cm + hopper - Extrusion axis 1200mm

Oil cooler from KraussMaffei, model UKTM. In good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Doors for KraussMaffei injection molding machine. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pai ...

clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Krauss Maffei KM 450-2700 C3 Clamping force 450 Ton Distance between columns : 900 mm x 800 mm Number of working hours : 55.000

thermosetting injection molding machine - BMC, included in the sale are 2 pcs Tool-Temp TT-162-E temperature device, LRX 250 manipulator, conveyor, vacuum pump Busch R5 RA 0025 F 503, possibility of conversion to thermoplastic

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing the screw up to a diameter of 35 mm.) Number of hours worked: 20,068 h

Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line

Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm

Manufacturer Krauss Maffei Model KM 350-1650 B1 Year 1995 Located in Turkey Machine can be seen in working condition 350 Ton

Injection moulding machine Krauss Maffei KM200-750CX Machine is in good condition Clamping force 200 Ton

110 Ton Distance between columns : 470 mm x 470 mm 250 gram

110 Ton Distance between columns : 470 mm x 470 mm 250 gram

injection molding machine KRAUSS MAFFEI EX 160/180 injection molding machine Number of hours worked: 20,068 2012

All maintenance has been done January 2021 380 Ton Screw diameter : 70 mm

Conic 60/126 extruder Machine can be seen in working condition Machine has been worked on PVC material

Krauss Maffei KMD 130-23 extruder Capacity : 1 Ton per hour Suitable for granule

Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control

KRAUSS MAFFEI KM 80-220 C1 2002 , screw 35 mm clamping force 80 ton in production

1K 65 Tons Min Mould height - 260 Max Moul Height - 400 distance btw columns - 400 opening stroke 730 valve gates - 1 Max Shot Weight - 142

RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv

USED KRAUSS MAFFEI HZ 630 PH CENTRIFUGE REF.: C6486 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 630 Ph Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

USED KRAUSS MAFFEI HZ125 CENTRIFUGE REF.: C6484 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 125 Technical characteristics: Basket diameter 1250 mm Max. rotational speed 1220 rpm

USED KRAUSS MAFFEI HZ 63 SI CENTRIFUGE REF#: C6483 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 63 Yes Caractéristiques techniques : Densité admissible du produit : 1250 kg/m3. Température du produit : 50 ºC Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer cintact us.

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Pressure on the material: 2040 bars CLOSING UNIT Mini /Max Mold Thickness: 300-650 mm Passage between columns: 570 x 570 mm

Closing force: 200 tons Distance between columns: 560 x 560 mm, Dimension trays: 915 x 915 mm

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 258 cm³ Length / diameter ratio: 18 L / D Pressure on the material: 1469 bars CLOSING UNIT Closing force: 1300 kN Passage between columns: 405 x 405 mm Tray size: 610 x 610 mm

Used Krauss Maffei 280-1900 C3 Injection moulding machine From 2000 Equipped with Wittmann robot W631-0386/2003 Machines is functional and in production, can be seen anytime by appointment. PDF attached

Krauss Maffei LRX150-0604 X-axis dimension 900 mm Y-axis dimensions 1800 mm Z axis dimension 3000 mm C-steering axles Servo drive

Krauss Maffei LRX150S-0469 X-axis dimension 900 mm Y-axis dimensions 1400 mm Z axis dimension 2500 mm Load capacity 20 kg C-steering axles Servo drive

Krauss Maffei KM800-8100 MX Injection Moulding Machine With Robot 3300 gr(PS) Min-Max mould thickness : 500-1100 mm Distance between column : 1120 mm x 1000 mm Screw diameter : 95 mm

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 bar.

This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.

This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.

USED KRAUSS MAFFEI HZ125 CENTRIFUGE

USED KRAUSS MAFFEI SZ 92 PUSHER CENTRIFUGE

USED KRAUSS MAFFEI SZ 92 PUSHER CENTRIFUGE

Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1600x1530 Clearance between columns (hxv) [mm] 1120x1100 Min./max. mold height [mm] min 1100 Injection unit Screw diameter [mm] 135 Injection volume [cm3] 8588 Injection weight [g] 7807

Closing unit Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 X 1530 Clearance between columns (hxv) [mm] 1120 X 1000 Min./max. mold height [mm] min 600 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2863 Injection weight [g] 2605 Injection pressure [bar] 1742

Closing unit Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1000x950 Clearance between columns (hxv) [mm] 735x685 Min./max. mold height [mm] 250 - 600 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 383 Injection pressure [bar] 2304 Electrical and hydraulic equipment Rated power of the pump motor [kW] 36.1 Heater power [kW] 29.2