We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,955 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Travel paths , X 900 mm, Y 1800 mm, Z ,2500 mm, C 0 to 90° pneumatic Including enclosure 1400 x 2400 x 2100 mm Conveyor belt 590 x 2540 mm, height-adjustable Approx. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 3,000 mm, weight approx.: 550 kg
used
Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg
used
Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg
used
Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance
used
Used Krauss Maffei 150-700 C1 Injection moulding machine From 1998 Without robot Machines is functional and in production, can be seen anytime by appointment. PDF attached.
used
This Krauss-Maffei 150-700 C2 Injection moulding machine was manufactured in the year 2003 in Germany. It is equipped with a clamping force of 1500 kN, a SP 700 injection unit with a screw diameter of 50 mm. Shot weight for PS is at 343g. See video gallery for more impressions. The injection moulding machine has 76901 cycle hours and 90924 machine on hours.
used
This KRAUSS MAFFEI 150-700 C2 Injection moulding machine was manufactured in 2000 in Germany. This machine offers a clamping force of 1500 kN and features a mold mounting platen sized at 780 mm x 790 mm. With a tool opening stroke of 600 mm and an opening width of 900 mm. Screw diameter options include 45 mm, 50 mm, and 55 mm, while injection pressures range from 1564 bar to 2336 bar. The screw speed reaches up to 356 rpm, with a dry running speed of 1700 l/min. It requires approximately 345 liters of oil filling. Contact us anytime for further information.
used
KrausMaffei-150 clamping force 1500 fixation plate size 720x710 distance between bars 500x450 mold height 300 opening stroke 600 coupling pin pneu ejector 250 ejector stroke 150 screw 50 disponible from September 2021
used
Krauss Maffei LRX-S 150-0956 X-axis dimension 900 mm Y-axis dimensions 1400 mm Z axis dimension 2500 mm Lift capacity 15 kg C-steering axles Servo drive
used
Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.
used
Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.
used
Key data: 150
two-component machine year of manufacture 1995, closing force 150 T, control MC 3, plasticizing unit 1 - screw diameter 40mm, molded weight 183g, plasticizing unit 2-screw diameter 30mm, molding weight 85g
used
Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009
used
Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...
used
Screw diameter: 40 mm Calculated injection volume: 217 cm³ Length/diameter ratio: 23 L/D Pressure on the material: 2377 bars Nb Temperature zones: 5 N CLOSING UNIT Closing force: 1500 kN GENERAL Heating power: 13 kW Total installed power: 22 kW Oil quantity: 345 l. Dimension: (WxHxD) 4.47 x 2.19 x 1.51 m. Weight: 6400 Kg
used
Krauss Maffei KM 150-520 C2 with the LR 100 robot Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 780 x 790 Clearance between columns (hxv) [mm] 500 x 500 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 7.1 Dimensions (L x W x H) [m] 4.66 x 1.51 x 2.19
used
Manufacturer Krauss Maffei Type KM 800-8000 MC Control MC4 Built in 1999 Closing unit Closing force t 800 Opening path mm 2000 Holm size mm 1120 x 1000 Installation height min/max mm 600/1100 Plate size 1600 x 1510 Spraying unit Screw diameter mm 130 Spray volume cm3 6172 Spray weight gr 5617 Spray pressure bar 1296 Dimensions and weights Dimensions LxWxH m 10.6 x 2.9 x 2.4 Machine weight Kg 47000 Other robot core pulls
used
Manufacturer Krauss Maffei Type KM 250-1200 B Control MC 3 Built in 1990 Closing unit Closing force t 250 Opening path mm 820 Holm size mm 630 x 560 Installation height min/max mm 330 Plate size 900 x 830 Spraying unit Screw diameter mm 60 Spray volume cm3 678 Spray weight gr 610 Spray pressure bar 1778 Dimensions and weights Dimensions LxWxH m 8.28 x 2.24 x 2.35 Machine weight Kg 12600 Other
used
Manufacturer Krauss Maffei Type KM 200 - 620 B Control MC 3 Built in 1989 Closing unit Closing force t 200 Opening path mm 750 Holm size mm 560 x 500 Installation height min/max mm 300 Plate size 830 x 770 Spraying unit Screw diameter mm 50 Spray volume cm3 377 Spray weight gr 339 Spray pressure bar 1638 Dimensions and weights Dimensions LxWxH m 7.10 x 1.70 x 2.30 Machine weight Kg 9500 Other 2 x Core pulls 3 x Air valves robot interface
used
Krauss Maffei Type: KM 140-700 C3 Sprinter, with IML Robot Control: MC 4 Built: 2000 Closing unit Clamping force t: 140 Holm size mm: 470 x 470 Installation height min/max mm: 300 plate size: 745 x 770 Spraying unit Screw diameter mm: 50 Spray weight gr: 346 Spray volume cm3: 377 spray pressure bar: 1892 Dimensions and weights Dimensions LxWxH m: 4.8 x 1.8 x 2.2 Machine Weight Kg: 6800 Other with IML Robot 2 Cover, Euromap 12
used
Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones
used
Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW ...
used
Krauss Maffei hose pouring machine type: KM 650-4350 BM, with Robo control: MC 3 construction year: In 1993 Schliesseinheit Schliesskraft t: 650 opening ways mm: In 1750 cross-beam measure mm: 1000 x 900 installation heights min / max. mm: 600 record size: 1430 x 1350 hose unity snail diameter mm: 85 hose weights gr: In 1965 hose volumes cm?: 2195 hose pressure cash: In 1993 mass and weights dimensions LxBxH m: 12.5 x 2.50 x 2, 3 machine weights kg: 35.000/12.000 other Neureder robot
used
Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface
used
Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface
used
Krauss Maffei injection moulding machine Type: KM 650 / 8000 BM control: MC 3 year: 1992 Clamping unit Clamping force t 650 Gap mm: 1150 Holm dimension mm: 1000 x 900 min/max height mm: 600 / -. Plate size: 1430 x 1350 Injection unit Screw diameter mm: Gr 115 injection weight: 4345 Injection volume cm m³: 4830 Spray pressure bar: 1656 Dimensions and weights Dimensions Lxwxh m: 13.1 x 3.1 x 2.4 machine weight kg: 52,000
used
Krauss Maffei injection moulding machine Type: KM 800 / 4350 BM, with Neureder robot control: MC 3 year: 1993 Clamping unit Clamping force t 800 Gap mm: 1245 Holm dimension mm: 1000 x 900 min/max height mm: 705 /. Plate size: 990 x 1380 injection unit Screw diameter mm: 85 Injection weight gr: 1965 Injection volume cm m³: 1820 Spray pressure bar: 2185 Dimensions and weights Machine weight kg: 38,000/12,000 Other 2 core pull, Neureder robot system
Krauss Maffei injection moulding machine Type: KM 280-1400 C3 control: MC 4 year of construction: 2002 Clamping unit Clamping force t 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: Gr 60 injection weight: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling robot interface battery Highspeedmachine
used
Krauss Maffei injection moulding machine Type: KM 650-3500 C2 control: MC 3F built: 1997 Clamping unit Clamping force t: 650 gap mm: 1150 Holm dimension mm: 1000 x 930 min/max height mm: 600 / 1750 Plate size: 1510 x 1370 injection unit Screw diameter mm: 90 injection weight gr: 2605 Injection volume cm 3: 1777 spray pressure bar: 1742 Dimensions and weights Dimensions Lxwxh m: 10 x 2.8 x 2.7 machine weight kg: 35,000 Miscellaneous Core pull 4 EUROMAP 12
Krauss Maffei injection moulding machine Type: KM 320-1400 C3 control: MC4 year: 2000 Clamping unit Clamping force t: 320 gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.8 x 2.2 x 2.4 machine weight kg: 16,300
Krauss Maffei injection moulding machine Type: KM 280-1400 C3 battery control: MC4 year: 2000 Clamping unit Clamping force t: 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling Euromap12, battery
Krauss Maffei injection moulding machine Type: KM 180-1000 C3, battery control: MC 4 year of construction: 1999 Clamping unit Clamping force t: 180 gap mm: 700 Holm dimension mm: 560 x 560 min/max height mm: 600 Plate size: 915 x 915 injection unit Screw diameter mm: 55 injection weight gr: 476 Injection volume cm 3: 523 spray pressure bar: 1904 Dimensions and weights Dimensions Lxwxh m: 5.6 x 1.9 x 2.2 machine weight kg: 9,700 Miscellaneous new pump 2013 Euromap12 battery
used
warehouse no.: 501284 manufacturer: KRAUSS MAFFEI Typ: Saeule Nr. 6400007 year of construction: new Column for pressure intensifier match to the machine size Krauss Maffei KM 110 and KM 125. Total there are 6 columns available, they are brand new and unused. Overall length 1138 mm, piston diameter 140 mm, rod diameter 95 mm. Krauss Maffei Order No. 6400007 detailed description: Column for closing side of size KM 110 and KM 125 are to check the dimensions drawings with exact measurements available.
used
used spare part IMM - Column warehouse no.: 501285 manufacturer: KRAUSS MAFFEI Typ: Saeule year of construction: neu Column for intensifier match the machine size Krauss Maffei 501285 There are a total of 6 columns available, they are brand new and unused. Total length 965 mm, diameter 124 mm piston, piston rod diameter 85 mm.
used
Injection unit Krauss Maffei size 700 complete with screw cylinder 50 mm Ã?, complete with all valves and servo motor
used
- Krauss Maffei MC3 EK 200 EUR 450 - Krauss Maffei MC3 KR 103 EUR 450 - Krauss Maffei MC3 LV 200 + LVR 10 EUR 600 - Krauss Maffei MC3 PR 201 EUR 450 - Krauss Maffei MC3 PR 202 EUR 450 - Krauss Maffei MC3 PV 200 EUR 450 - Krauss Maffei MC3 EPR10 EUR 250 - Krauss Maffei MC3 EPR11 EUR 200 - Krauss Maffei MC3 VU100 EUR 200 - Krauss Maffei MC3 KMV2 EUR 250 - Krauss Maffei MC3 CPU100 EUR 250 - Krauss Maffei MC3 BT100 EUR 250 - Krauss Maffei MC3 IA100 EUR 200 - Krauss Maffei MC3 IE200 EUR 200 - Krauss Maffei MC3 GDC EUR 300 - Krauss Maffei MC3 EPR20 EUR 250 - Krauss Maffei MC3 FD100 EUR 350
used
Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units
used
Valve, safety valve HV10, Manufacturer: Krauss Maffei, SN: 6252527 RN: 177.73 025943/2 used.
used
Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-1, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm:105 Spray weight gr: 4137 Spray volume cc: 4546 spray pressure possible: 1778 Dimensions and weights Machine weight Kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64
used
Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-2, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm: 115 spray weight gr: 4962 Spray volume cc: 5453 spray pressure to be: 1482 Dimensions and weights Dimensions LxBxH m: 12.16 x 3.49 x 2.58 Machine Weight kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64
used
Stock # 5054 Proportional valve H10/11, Manufacturer: Krauss Maffei No. 6256916 used
used
Stock # 5138 Ways Valve 4/3 NG10 Manufacturer: Krauss Maffei No.6256743 RN 177.73 025943/2 used
used
Stock #5037 Safety valve H16.6 Manufacturer: Krauss Maffei, No. 6450878 used
used
Stock # 5119 Valve H50, Manufacturer: Krauss Maffei No. 6250771 00558769 used.
used
Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible
used
KRAUSS MAFFEI KM450-4500 CS PET (450 ton) year `2010 for PET preform Location : Korea
used
Krauss Maffei KM 50 / 160 C2 Operating hours approx. 47,500 Core train Operational data collection (function uncertain, was not used by us) Various power connections Screw diameter D=30mm Condition: good / Ready to use without funnel
used
Manufacture Krauss Maffei Type KM 350-1900C2 Year prod../ no. manufacture 2001/354332 Diameter of screw mm 60 Shot volume g 700 Presure bar 2420 Clamping force kN 3500 Mould fixing platen size mm 1060 x 1095 Distance between tie bars mm 710 x 710 Mould height - max. mm 380 Opening stroke mm 920 Max odległość pomiędzy płytami mm 1600 Control MC 4 Weight kg 16.000 Additional Hydraulics cores - 4 pcs. // Bottle with ntrogen
used
Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW
used
Used hydraulic pump, Voith IPH 5/64 gear pump, for sale in good condition. Capacity 92 l / min.