We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,948 used machines on RESALE, but how to find them? Machine Search
used
Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg
used
Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance
used
STANDARD-EQUIPPED
used
This Kraus Maffei 65-220 C1 Injection moulding machine was manufactured in the year 2004 and has 74458 production hours. It is equipped with a Krauss Maffei control unit. The machine has a clamping force of 650 kN and screw diameter of 15 mm.
used
Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW ...
used
used
used
used
used
Manufacturer Krauss Maffei Type KM 800-8000 MC Control MC4 Built in 1999 Closing unit Closing force t 800 Opening path mm 2000 Holm size mm 1120 x 1000 Installation height min/max mm 600/1100 Plate size 1600 x 1510 Spraying unit Screw diameter mm 130 Spray volume cm3 6172 Spray weight gr 5617 Spray pressure bar 1296 Dimensions and weights Dimensions LxWxH m 10.6 x 2.9 x 2.4 Machine weight Kg 47000 Other robot core pulls
used
Manufacturer Krauss Maffei Type KM 250-1200 B Control MC 3 Built in 1990 Closing unit Closing force t 250 Opening path mm 820 Holm size mm 630 x 560 Installation height min/max mm 330 Plate size 900 x 830 Spraying unit Screw diameter mm 60 Spray volume cm3 678 Spray weight gr 610 Spray pressure bar 1778 Dimensions and weights Dimensions LxWxH m 8.28 x 2.24 x 2.35 Machine weight Kg 12600 Other
used
used
Manufacturer Krauss Maffei Type KM 200 - 620 B Control MC 3 Built in 1989 Closing unit Closing force t 200 Opening path mm 750 Holm size mm 560 x 500 Installation height min/max mm 300 Plate size 830 x 770 Spraying unit Screw diameter mm 50 Spray volume cm3 377 Spray weight gr 339 Spray pressure bar 1638 Dimensions and weights Dimensions LxWxH m 7.10 x 1.70 x 2.30 Machine weight Kg 9500 Other 2 x Core pulls 3 x Air valves robot interface
used
used
used
used
Krauss Maffei Type: KM 140-700 C3 Sprinter, with IML Robot Control: MC 4 Built: 2000 Closing unit Clamping force t: 140 Holm size mm: 470 x 470 Installation height min/max mm: 300 plate size: 745 x 770 Spraying unit Screw diameter mm: 50 Spray weight gr: 346 Spray volume cm3: 377 spray pressure bar: 1892 Dimensions and weights Dimensions LxWxH m: 4.8 x 1.8 x 2.2 Machine Weight Kg: 6800 Other with IML Robot 2 Cover, Euromap 12
used
Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530160170cm + hopper - Extrusion axis 1200mm
used
Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones
used
Oil cooler from KraussMaffei, model UKTM. In good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).
used
Krauss Maffei hose pouring machine type: KM 650-4350 BM, with Robo control: MC 3 construction year: In 1993 Schliesseinheit Schliesskraft t: 650 opening ways mm: In 1750 cross-beam measure mm: 1000 x 900 installation heights min / max. mm: 600 record size: 1430 x 1350 hose unity snail diameter mm: 85 hose weights gr: In 1965 hose volumes cm?: 2195 hose pressure cash: In 1993 mass and weights dimensions LxBxH m: 12.5 x 2.50 x 2, 3 machine weights kg: 35.000/12.000 other Neureder robot
used
Doors for KraussMaffei injection molding machine. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pai ...
used
Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface
used
Berstorff Three Roll Calender Manufacturer: Krauss Maffei Berstorff 2650mm wide x 650mm (26”) diam. Effective working width 2600mm (Roller Head Die Width) Rolls Configuration: ‘I’ shape Rolls Type: Peripherally Drilled Drive: Right Hand Transmission: Direct Drive by Cardan Shafts Motors: 3X 75 KW, 2600 RPM, 50 Hz Nip Adjustment: Hydraulic (Berstorff patented) Fixed roll: Roll 2 (middle roll) Adjustable roll: Roll 1 and 3 (upper and lower roll), Max Roll gap is 80 mn Cross axis: Roll 1, 2 and 3, Hydraulic operated, max. 25 mm Pre-loading & Roll Bending: Available Rolls Speed: Variable, 0.5-10 m/ min Bearings: Antifriction Roller Bearings Electricals/ Controls: PLC Complete with motor and controls Year 2009
used
Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface
new
Pallet roller conveyor with turntable, 10,2m Kraus, mint condition -70% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Technical data: - Pallet roller conveyor with turntable without drive, Fa. Kraus - For the transport of EURO pallets - Total length 10,2m, outside width 93cm, - 1 piece turntable manual, smooth running - 1 piece roller conveyor 4,5m - 1 piece roller conveyor 3,3m - Height upper edge of roller 345 to 450mm (adjustable) - Has been dismantled for transport - free of charge 2 used roller rails to extend the roller conveyor by 3m - We can also send you a video on request 6 months warranty We give you 6 months warranty ...
used
Krauss Maffei KM 450-2700 C3 Clamping force 450 Ton Distance between columns : 900 mm x 800 mm Number of working hours : 55.000
used
Krauss Maffei injection moulding machine Type: KM 650 / 8000 BM control: MC 3 year: 1992 Clamping unit Clamping force t 650 Gap mm: 1150 Holm dimension mm: 1000 x 900 min/max height mm: 600 / -. Plate size: 1430 x 1350 Injection unit Screw diameter mm: Gr 115 injection weight: 4345 Injection volume cm m³: 4830 Spray pressure bar: 1656 Dimensions and weights Dimensions Lxwxh m: 13.1 x 3.1 x 2.4 machine weight kg: 52,000
used
thermosetting injection molding machine - BMC, included in the sale are 2 pcs Tool-Temp TT-162-E temperature device, LRX 250 manipulator, conveyor, vacuum pump Busch R5 RA 0025 F 503, possibility of conversion to thermoplastic
used
Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing the screw up to a diameter of 35 mm.) Number of hours worked: 20,068 h
used
Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line
used
Krauss Maffei injection moulding machine Type: KM 800 / 4350 BM, with Neureder robot control: MC 3 year: 1993 Clamping unit Clamping force t 800 Gap mm: 1245 Holm dimension mm: 1000 x 900 min/max height mm: 705 /. Plate size: 990 x 1380 injection unit Screw diameter mm: 85 Injection weight gr: 1965 Injection volume cm m³: 1820 Spray pressure bar: 2185 Dimensions and weights Machine weight kg: 38,000/12,000 Other 2 core pull, Neureder robot system
used
Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm
used
Manufacturer Krauss Maffei Model KM 350-1650 B1 Year 1995 Located in Turkey Machine can be seen in working condition 350 Ton
used
Injection moulding machine Krauss Maffei KM200-750CX Machine is in good condition Clamping force 200 Ton
Krauss Maffei injection moulding machine Type: KM 280-1400 C3 control: MC 4 year of construction: 2002 Clamping unit Clamping force t 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: Gr 60 injection weight: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling robot interface battery Highspeedmachine
used
110 Ton Distance between columns : 470 mm x 470 mm 250 gram
used
110 Ton Distance between columns : 470 mm x 470 mm 250 gram
used
Krauss Maffei injection moulding machine Type: KM 650-3500 C2 control: MC 3F built: 1997 Clamping unit Clamping force t: 650 gap mm: 1150 Holm dimension mm: 1000 x 930 min/max height mm: 600 / 1750 Plate size: 1510 x 1370 injection unit Screw diameter mm: 90 injection weight gr: 2605 Injection volume cm 3: 1777 spray pressure bar: 1742 Dimensions and weights Dimensions Lxwxh m: 10 x 2.8 x 2.7 machine weight kg: 35,000 Miscellaneous Core pull 4 EUROMAP 12
used
KrausMaffei-150 clamping force 1500 fixation plate size 720x710 distance between bars 500x450 mold height 300 opening stroke 600 coupling pin pneu ejector 250 ejector stroke 150 screw 50 disponible from September 2021
used
injection molding machine KRAUSS MAFFEI EX 160/180 injection molding machine Number of hours worked: 20,068 2012
Krauss Maffei injection moulding machine Type: KM 320-1400 C3 control: MC4 year: 2000 Clamping unit Clamping force t: 320 gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.8 x 2.2 x 2.4 machine weight kg: 16,300
used
All maintenance has been done January 2021 380 Ton Screw diameter : 70 mm
used
Conic 60/126 extruder Machine can be seen in working condition Machine has been worked on PVC material
used
Krauss Maffei KMD 130-23 extruder Capacity : 1 Ton per hour Suitable for granule
Krauss Maffei injection moulding machine Type: KM 280-1400 C3 battery control: MC4 year: 2000 Clamping unit Clamping force t: 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling Euromap12, battery
used
Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control
used
KRAUSS MAFFEI KM 80-220 C1 2002 , screw 35 mm clamping force 80 ton in production
used
1K 65 Tons Min Mould height - 260 Max Moul Height - 400 distance btw columns - 400 opening stroke 730 valve gates - 1 Max Shot Weight - 142
Krauss Maffei injection moulding machine Type: KM 180-1000 C3, battery control: MC 4 year of construction: 1999 Clamping unit Clamping force t: 180 gap mm: 700 Holm dimension mm: 560 x 560 min/max height mm: 600 Plate size: 915 x 915 injection unit Screw diameter mm: 55 injection weight gr: 476 Injection volume cm 3: 523 spray pressure bar: 1904 Dimensions and weights Dimensions Lxwxh m: 5.6 x 1.9 x 2.2 machine weight kg: 9,700 Miscellaneous new pump 2013 Euromap12 battery