kr used for sale

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Pneumatic Injection Unit Kremlin A25 P air: 6 bar P prod. 6 bar Dimensions:45 x 160 x 45 mm

For sale is a functional, well-preserved Krones Linatronic empty bottle inspector. Specifications: Manufacturer: Krones Model: Linatronic Year of Make: 1997 Quantity: 1 pc. Capacity:- Voltage: 230/400 V Frequency: 50 Hz Length: 250cm scaffolding + 70cm overhang towards filler Width: 110cm Height: 280cm Equipment: Formats see pictures

Robot KUKA KR10 R1100-2 / SEL KRC4 2 pieces available 1x 135 and 1x 82 operating hours Year of construction: 10/2021 Number of axes: 6 Max. load capacity: 6 kg Max. working range: approx. 1100 mm Scope of delivery: robot, controller, cable, teach panel 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be viewed Freely loaded / ex works. Shipping costs abroad on request. Please enter your country, city and zip code.

Pressure filler Krones Mecafill type: VK2V K126-308 with 96 filling valves and 18head crowner with short filling tubes with double pre-evacuation with HDE (hot water injection) complete reconditioned in 2009 by company Krones clockwise direction - from left to right capacity: approx. 35.000 bph by 300 ml softdrinks products: beer, alcohol free beer, long drinks, cocktails, cider, softdrinks, carbonized water, still water with Siemens S7-300 PLC and HMI touchpanel including all available spare parts The filler is still in production until September 2025 and can be inspected during procduction

Key data: 3000 mm, 3 mm

Max. bending length: 3000 mm Max. sheet thickness: 3 mm steel Manual backgauge Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable Bending rail ground Operating instructions Weight: approx. 5,000 kg

Spray nozzle KREMLIN TETE N23 V Dimensions: 41 x 41 x 33 mm Minimum order value 50,- €

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 190 ET300 Item No.: 0T823X11 Material: PP Immersion Depth: 3 00 mm Pump base: Ø 360 mm Pump flange: Ø 420 mm motor: 2.2 kW 230 / 400V IP55 New !' Dimensions 610 x 420 x 420 mm

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 150 ET300 Item No.: 0T623X18 Material: PP Immersion Depth: 2 85 mm Pump base: Ø 280 mm Pump flange: Ø 325 mm motor: 0.75 kW 230 / 400V IP55 New !' Dimension 550 x 325 x 325 mm

Nipping press - manual Make Krause Model FNP500 Year 1980´s Width 500 x 250 mm Options up to 100 mm thickness Available Direct

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 170 ET300 Item No.: 0T723X21 Material: PP Immersion Depth: 2 95 mm Pump base: Ø 330 mm Pump flange: Ø 360 mm motor: 1.5 kW 230 / 400V IP55 New !' Dimension 620 x 360 x 360 mm

for the production of 27,000 bottles per hour. With shape

Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump SCHMITT CENTRIFUGAL PUMPS Type: T 150 ET500 Item no.: 0T625X3R < -br />Material: PP Immersion depth: 490 mm Pump base: Ø 280 mm Pump flange: Ø 325 mm motor: 0.0.000 mm 75 kW 230 / 400V IP55 Dimension 750 x 325 x 325 mm

for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould

Key data: 700 mm, 450 mm, 500 mm

Machine Details Stock-No. 1105-04051 Type of machine Machining Center - Vertical Make KRYLE Type VMC 700 F Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time IMMIDIATELY Freight basis ex Warehouse Price Technical details x-travel 700 mm Y-Travel 450 mm Z-Travel 450 mm table-size 1000 X 500 mm spindle taper BT 40 number of spindle speeds 80 - 8000 min-1 tool piece magazine with 24 seats total power requirement 25 kVA weight of the machine approx. 5 t Additional information FANUC OM F CONTROL NICE MACHINE

Foil & embossing press Make Krause Model Foil press Year 1900 Size: 20 x 28 cm Space between columns 45 cm Pressue 20 tons? Heating electric heated (can be equiped with thermostate on request) Available direct

For sale is a used, well-preserved Krones Sleevematic labeller, which was in daily use until the very end. Specifications: - Year: 2004 - Sleeve formats: 0.2, 0.33, 0.5 - Power: 30,000 bph

Destoner Krumbein Model: Kern Ex 4 x 32 mm each Stainless steel version, mobile Connection 230V, 1.8A Used machine cleaned 3 Months Warranty + Spare Parts Service Option: Maintenance contract Delivery Visit our bakery equipment exhibition!

Empty bottle inspector dismantled and stored now Manufacturer: Krones Type: Linatronic 735 M2 Year of construction: 2007 Output: 39.600 bottles per hour Additional info: Glideliner, accutable and partly conveyor belts are also The Krones Linatronic 735 M2 is a high-speed label inspection machine designed for use in the food and beverage industry. It was released in 2007 and is capable of inspecting up to 72,000 containers per hour. Here are the specifications for the machine: - Dimensions: 4.4 meters long, 1.7 meters wide, and 2.7 meters high - Weight: approximately 4,500 kg - Power supply: 400V AC, 50/60 Hz, 16A - Maximum container diameter: 120 mm - Label height range: 10-200 mm - Label length range: 15-300 mm - Inspection accuracy: up to 99.9% - Maximum speed: 72,000 containers per hour - Operating temperature range: 5-45°C - Air pressure: 6 bar The Linatronic 735  ...

Manufacturer KRAUSS MAFFEI Type KM 200-700 C1 M. Year 2005 • Dimensions(LxWxH) 5600x1900x2200 • Weight 11000 kg Injection molding machines are used for manufacturing parts from different plastics in a wide range of colors, shapes and sizes. Processing of thermosetting plastics involves transforming the initial material in the machine into a plastic state by heating it and injecting it under pressure into a closed shape (mold) and removing it from the mold after a cooling phase. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Missing electrical and mechanical parts. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

grinding diameter: 600 mm grinding length: 2000 mm centre height: 320 mm workpiece weight: 1200 kg workpiece weight in steadies max.: 5000 kg grinding wheel size: 760 x 304,8 x 75 mm grinding wheel turining speeds: 500 - 1400 U/min turning speed range - workpiece: 5 - 150 U/min main drive motor: 22 kW workpiece drive: 12 kW Control: Fanuc 0i Mate-MD total power requirement: 42 kW weight of the machine ca.: ca 10 t dimensions of the machine ca.: 11 x 2,9 x 1,8 m equipped with: - CNC control FANUC Series 0i Mate-MD - tailstock - 5 closed steady rests - 4 support blocks - Splash guard doors - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2008 KRAUSS MAFFEI 420-700-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

Drip trays with ramp Condition: few signs of wear Availability: immediately Operating time: for testing purposes only

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

For sale is a Krones Ergomatic labeller in mint condition. The system can be used for large, small and small glass, as well as bottles. Top condition. Is given away inexpensively.

The Stanzeinrichtung CutStar V2 XL is a stamping and punching machine designed for industrial applications. With its robust build and advanced technology, this machine is ideal for precise cutting, shaping, and forming operations. Weight: 12600 kg Dimensions (L x W x H): 3220 mm x 2750 mm x 3600 mm Connection Voltage: 25 kW Operating Pressure Hydraulic (Max/Min): 140 bar / -- bar Operating Pressure Pneumatic (Max/Min): 10 bar / -- bar Operating Voltage: 230/400 V Frequency: 3 x 400 V / 50 Hz Find more here - / Contact us at -

The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in the automotive industry. Hydraulic Pressure: - Max Pressure: 180 bar - Operating Pressure: 150 bar Power: 25 kW Operating Frequency: 50 Hz Connection Voltage: 3 x 400 V Full Hydraulic System Installation Dimensions (L x W x H): 4700 mm x 2790 mm x 4850 mm Weight: 18,000 kg Find more here - / Contact us at -

We offer a Milling Machine Routing Star V that is an ideal choice for automotive component machining and other high-precision tasks. We have four machines available from different years ( 2012, 2014, 2017) Technical Data: Dimensions (L x W x H): 5600mm x 2990mm x 2950mm Weight: 8000 kg Power Rating: 12 kW Connection Power: 3 x 400 V, 50 Hz Hydraulic Working Pressure: Max (bar not specified) Pneumatic Working Pressure: Not specified Table Size: 1400mm x 700mm Table Type: Rotating Table Number of Robots: 2 Tool Changer: Yes Find more here - / Contact us at -

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air blower for Horizon MC 8, totally overhauled by Ryobi rep. and in as new condition- ready for production. Can ship worldwide.

Kuka KR 16-2 Year of Make: 2010 Payload: 16 kg Reach: 1611 mm Control: KRC2ED05

The high-precision container sorter , Height, colour, contour, neck or closure: Whatever the characteristic features of your containers, Sekamat recognises them and unerringly rejects all the others. The control is contactless via camera. Possible sorting criteria: Container contour Diameter Container height Muzzle contour Color Presence of the shutter Additional detection units for: Label color Partially filled containers ACL Closure color uwemetzlerdingslebener

Compressed air tank 5.3 m³, operating pressure 7 bar

• Conveying height 1,290 mm • Inlet height 620-780 mm • Tablet diam. 3-25 mm • Deduster path total length 15 m • Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h • 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle • Programme control C920 with HMI Allen-Bradley Panel View Plus 600 • Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI • Metal check Lock Met 30+ with its own HMI • Bad ejection into glass container • PLC Allen-Bradley MicroLogix • Drive 100-240V/50/60Hz • Nozzle for dust extraction • Mobile

Roller width: 350 mm roll diameter: 110 mm Roller covering - soft rubber: 70 Grad shore rubber: NBR - Qualität Pressure line: 28 N / mm air pressure: max. 4 bar Capacity of dye tub: Becken - 1,3 Liter Capacity of dye tub: Zwickel - 0,3 Liter Speed driven roll: 0-25 U/min speed: 1 - 10 m/min voltage: 230 V / 50 Hz drive motor: 0,4 kW weight: 130 kg dimensions: 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, content: 1.3 litres, • with controllable motor drive, direct drive effected of the fixed roll, by means of wheels the pressure roll is driven when the nip is open. The data for this ad was created with ModulMWS - the softwar ...

Key data: 800 kN, 45 mm

KRAUSS MAFFEI KM 80-750 CX Stock No.: 503569 Manufacturer: KRAUSS MAFFEI Type: KM 80-750 CX Control: MC6 Year of Make: 2012 Operating hours: 34000 h Technical data closing page Clamping force: 800 kN Wooden dimensions h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Max. installation height: 500 mm Plate spacing max.: 750 mm Opening travel: 500 mm Ejector stroke: 150 mm Ejector force: 23 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 1000 kg Technical Data Spray Side Screw diameter: 45 mm Displacement: 318 cc Spray pressure: 2336 bar Screw length: 22 l/d Screw speed: 355 min Outdoor injection flow: 143 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 4.5m x 1.5m x 2m Total Weight: 3900KG Equipment Screen text German Core pull hydraulic 1x M ...

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

Manufacturer: Krones (modernised by Hormes) Type: Prontomatic Glass bottle labeling machine. Prepared for the processing of front and back labels (2 labeling stations), with 2 glue pumps (cold glue), maximum label length: 130 mm. Achievement. Up to 20,000 bph Good condition. Incl. format parts for different bottles 0.33 - 0.5 l

Kronborg Mark 5 Fish Gutting Machine is specifically designed for gutting a variety of fish, including cod, saithe, haddock, whiting, hake, and even river fish like carp. It is suitable for use on trawlers and in land-based factories. The fish is continuously placed in the feeding chamber, where a conveyor belt with catches transports them through a positional system of guiding plates to the gutting chamber. A rotating knife cuts the fish as required. After the cutting process, the fish passes through a rotating nylon brush and water sprays, effectively removing the remaining entrails. The gutted fish is then directed towards the outlet end for further transportation. Due to its compact size and lightweight design, Kronborg mark 5 is suitable for use on coastal fleet vessels and shore plants. Status: Overhauled Capacity: Able to process 40 fish per minute Size range: Fish  ...

Efficient and space-saving wraparound carton packaging Manufacturer: Kettner (Krones), modernized by Hormes Type: Wrapapack Output: Up to 18 cycles/min. Format: 6 x 4 bottles (0.33 l) Efficient wraparound carton packaging for the beverage industry The Kettner (Krones) Wrapapack carton packaging machine, modernised by Hormes, offers a reliable and high-performance solution for packaging bottles in wraparound cartons. With an output of up to 18 cycles per minute, this machine is ideal for beverage manufacturers looking for efficient and economical packaging processes.

Controller KRC 2 ed 05, XP, KSS 5.4, X11, Profibus card, nominal payload 16 kg, max reach 1611 mm, IP 65, motor cable, data cable, teachpendant KCP 2 ed 05, warranty

Manufacturer: KRONES Series: Autokol Year of Make: 2005 Capacity: 10,000 B/hr Formats: 500ml, 800ml Label type: self-adhesive; front/rear

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

Bottle inspector Krones / Germany Type Linatromic 735 Full Inspector With automatic rejection Year of construction: 2011 FILM AVAILABLE - PLEASE REQUEST

description: Vertical stroke of approx. 2000 mm incl. Vacuum pump and intermediate layer magazine for EURO and half pallets height: 3000 mm length: 1520 mm serial number: 2080467/017 width: 1120 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for o ...

description: For Ref PET/ PET cycle High performance is possible, ejecting bottles from overhead crates. The bottles are then collected in a container. Ready for squeezer. Price on request Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We a ...