kp 08 used for sale

Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, Safety Switch -Type: TX3C-A024M -ID No.: 082953 -Technical data: see photo of the nameplate -Dimensions: 245/45/H60 mm -Weight: 0.8 kg

CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...

A used Miwe Condo CO 5.0806 is currently for sale and immediately available in our warehouse. This stove is equipped with stone slabs of 80x60cm per floor. In addition, the oven has a digital Miwe FP control system per floor for the separate control of the 5 baking levels. With the Miwe FP controller, up to 30 baking programs can be stored. - Manufacturer: Miwe - Type: Condo CO 5.0806 - Stone slab stove - 5 shelves each 80x60cm - Max. temperature 320°C - Digital Miwe FP8 control - Mobile on swivel castors - Floor entrance height: 17cm - Technical data: - 29.1kW - 400 / 230V 3/N/PE - 50 Hz External dimensions: Width: 90cm Depth: 100cm (exhaust hood extra +40cm) Height: approx. 215cm

stroke: 175 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Güntner S-GFD 080A/2x7-L Manufacturer: Güntner Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 1900kW Air temperature: 35º C. Fans: 14 pieces, 0.8kW, 3 wires, 400V, 50Hz Dimensions: LxWxH = 8400x2200x2220mm Weight: 3050kg Sound pressure level: 52 dB(A) 10m distance, Condition: Good , Tested for leaks and fans Test run Jenbacher, Dry cooler, Dry Air Cooler, Emergency Cooler, Dry Cooler.

General SKU212T144 MakeIndustrial Produkts LocationBarneveld TypeMBF-2002-AC06-080DV-21GEN Pressure Working pressure8 Bar Main Features MaterialStainless steel Surface7.5 m2 Specified Features - Candle filter Candle filtercheck Notified bodyTÜV Filter surface7,5 m² Number of candles20 Candle sizesDia. 165x680 mm Liquid outletDN 80 Max. temperature100°C Top connectionsDN50 (2x), DN 80 Capacity1140 Ltr. Vessel sizesDia: 1250x920 mm MaterialStainless steel 1.4571 (316Ti) General No.V102046 Year of construction2001 Mounted on legscheck Floorspace1,5x1x5 m Total height1,8 m Weight1080 Extra Specificationstest pressure 10.4 barOils & fatCandle filtersGeneric medicinesOintmentsFine chemicalsBiotechnologyAgrochemicalsFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyConfectionerySolid pharmaceuticsBeveragesDyes ...

CHIRON FZ 08K S Magnum HSP High-Speed CNC Machining Center TECHNICAL FEATURES: Year: 2007 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Installed power: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW probe type TS27R x1 Spindle Cooling Unit x1 watering tray x1 unit for 6th side machining x1SCHUNK gripping system x84 HSK40 Type Tool Holder x14 Collet Type F35 x1 Electrical Cabinet Air C ...

Prometec 089.361.A01

Bosch Rexroth Bosch 0811 405 060

Nederman Dust Collector / Silo Dust Collector with Control and Compressed Air Treatment Manufacturer: Nederman Type: DFC-08M Item number: 5512680 Year of manufacture: 2023 Manufacturer of pressure vessels: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial Number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure Test Date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Control: Nederman DFC-08M Controller Compressed air treatment: Camozzi MC202-D00 Max. inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB Control/Connector Housing Design: Dedusting system for silo applications with integrated filter unit and fan Accessories / Scope of delivery ...

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange -Manufacturer: Alco, filter drier, unused original packaging -Type: ADK-084/PCN 003610 -Connection: 12 mm flange -Dimensions package: 175/70/H70 mm -Weight: 0.6 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Gear pump type: 1 547 220 500 / 0 542 015 083 271 -with tank and control valve -Drive: 24V 2kW -Dimensions: 140/200/H370 mm -Weight: 10kg

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, blower, filter drier housing, filter drier, filter drier, liquid filter drier -Manufacturer: Danfoss, Refrigerant Filter Drier -Type: DN 084 S -Content: 0.17 liters -Number: 2x filter dryer available -Price per piece -Dimensions: Ø 54 x 143 mm -Weight: 0.4 kg/pc.

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter drier housing, filter drier, filter dryer, liquid filter drier -Manufacturer: Danfoss, Refrigerant Filter Dryer -Type: DN 084 -Contents: 0.17 liters -Quantity: 1x filter dryer available -Price: per piece -Dimensions: Ø 55 x 167 mm -Weight: 0.5 kg/pc.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X052-088 -Contr: TDM 3.2-30-300-W1 -Quantity: 2x servo controllers available -Price per piece -Dimension: 450/70/H325 mm -Weight: 8.6 kg/pc.

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X014-088 -Contr: TDM 3.2-30-300-W0 / TVM 2.1-50-W1-220 -Quantity: 1x servo controller available -Dimension: 390/105/H325 mm -Weight: 15,1 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator, filter dryer housing, filter dryer, filter drier, liquid filter dryer -Manufacturer: Danfoss, liquid collector with filter dryer 2 pieces / double version -Filter dryer: Type: DX 083 -Permissible operating pressure: 28 bar -Individual components: see photos -Price/tax: complete -Dimensions: 350/350/H360 mm -Total weight: 13.8 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Lenze, geared motor with brake -Type: GS TO5-2 M VCK 080.32BR08 -Speed: 55 rpm -Power kW -Voltage: 380V -Torque: 126 Nm -Shaft: Ø 25 x 50 mm -Brake: Spring-applied brake, release voltage 205 VDC -Dimensions: 510/210/H190 mm -Weight: 23 kg

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, spur geared motor -Gear: Type GS TO4-2 B VCK 071-32 -Speed: 44 rpm / Torque: 79 Nm -Engine: Type SKhR 71-4B/1561 -Power: 0.37 kW / 1380 rpm -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 375/200/H165 mm -Weight: 13 kg/pc.

Mounting rails, sliding set, pipe clamps, pipe fastening, pipe clamp holder, WBD holder, clamping bracket, U-holder -Manufacturer: Sikla, 15 pieces of clamping brackets for attaching carrier profile F -Type: SB F 100-16 -Art.No.: 113 082 -Price/tax: complete -Dimension: 160/130/H30 mm -Weight: 0.7 kg/pc.

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF42-550-1164-018 080N -Piston: Ø 22 mm -Total length: 1200 mm -Piston rod: Ø 10 x 550 mm -Number: 37x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1200 mm -Weight: 0.9 kg/piece

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, cutter head milling cutter -Type: R260.22-080-15 -Hole: Ø 27 mm -Dimensions: Ø 90 x 50 mm -Weight: 1.3 kg

Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV, clamping cylinder stroke 23 mm -Type: 63-160 WS 08110 -Shaft Ø 28 mm -Number: 2x clamping cylinders available -Price: per piece -Dimensions: Ø 96 x 180 mm -Weight: 5.9 kg/piece

Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV, clamping cylinder stroke 30 mm -Type: 25-160 WS 08110 -Shaft Ø 12 mm -Number: 1x clamping cylinder available -Dimensions: Ø 50 x 128 mm -Weight: 1.4 kg