kp 08 used for sale

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 DW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 220 kg Special accessories Automatic wire Volt and ampere digital display Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part b ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...

Double door pharma grade washer incl. conrol panel Siemens, type Simatic 087. Washer is CE-marked.

Laboratory bead mill Manufacturer: VMA Getzmann GmbH Type: Dispermat SL-C50 N°: 0819203 Built: 2003 as good as new with ceramic grinding set with control panel additional pump with user manual and documentation LWH: 670 x 700 x 370

Control, circuit boards, spare parts for Arburg, injection molding machines -Type: ARB 389 D KPL -Weight: 0.5 kg

Plug socket -5x: 7000-08351-0000000 -5x: 7000-08321-0000000 -4x: 7000-08361-0000000 -5x: 7000-08341-0000000 -5x: 7000-08371-0000000 -Price: complete -Weight: 2 kg

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve to illustrate ...

Control card, control, PLC control -Manufacturer: Homatic -Type: CPU SPS-II 2-083-01-5053 -Dimensions: 190/40/H260 mm -Weight: 1 kg

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 800 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 800 mm Chipboard if necessary two-part The images serve to illustrate ...

Inductive sensor, electronics sensor -Type: IFRM 08P17A1/S35L -Number: 2x available -Price: per piece -Weight: 15 g

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 1,000 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 1,000 mm Chipboard if necessary two-part The images serve to illu ...

Torque wrench, torque tool -Recording: 1/2 inch -Torque: 5-25 kpm -Dimensions: 480/220/H110 mm -Weight: 6.4 kg

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 1,000 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 1,000 mm Chipboard if necessary two-part Price per pcs.: 45,74 € incl. 19% VAT. 08x drill screws, new Vers ...

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 800 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 800 mm Chipboard if necessary two-part Price per pcs.: 36,59 € incl. 19% VAT. 08x drill screws, new Version:  ...

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 600 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 600 mm Chipboard if necessary two-part Price per pc:: 27,45 € incl. 19% VAT. 08x drill screws, new Version: gal ...

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm

Domino Model: DPX1000 digital Fume extraction cabinet Serial: 082236-4051 Domino laser fume extractor cabinet, 1Ph

Machine type bolt welding system Make SOYER Type BMS-8N Connection voltage 1 x 230 volts Welding range M 3 – M 8 3 – 7.1 mm Ø Material steel, stainless steel, Aluminium, brass Welding process peak ignition According to DVS leaflet 0903 Current setting infinitely variable Welding time 1,000 – 3,000 ms Welding sequence 20 bolts / min., depending on the bolt diameter Pistol positioning welding pistol Dimensions W x H x D 320 x 300 x 120 mm Hedging 16 amps Weight 10 kg Age 12 months Condition workshop tested, as new, incl. UVV test report Scope of delivery bolt welding device with the following accessories: 1 piece welding gun PS-1K 2 pieces ground cable 3 mtr. long 1 piece transport case 1 piece user manual Warranty 24 months from the date of delivery List original price 2.490,00 € + VAT Price kpl. with above a ...

working width: 1250 mm maximum length of workpieces 3500 mm feed speed 2.4 - 7.5 m / min finishing line consisting of the following elements: - infeed conveyor - brush sander with 4 transversal brusches - brush sander with 2 longitudinal brushes - dust removal with brush and blowers - Spray cabin Rotoclean G8 rotating arm with 8 pistols workpiece recognition for saving paint workpiece transport with steel belts recuperation and cleaning steel belts air cleaning with water curtain - 3 lacquer pumps GRACO 015.085 - 7 pumps for color stain GRACO Husky 515 - intermediate conveyor - cross transport with rods and overhead hot air dryer - intermediate conveyor - drying tunnel with IR lamps - UV dryer with 2 lamps - outfeed conveyor

Key data: 4200 , 2200

PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support for narrow workpieces • sliding system  ...

Ser.No.: 080700467 // Counter (m): 0.84 Format (mm): min. 120 x 148 (option 105 x 148) // max. to 350 x 500 Paper weight: 40 - 300 g/m² Equipment / Additional information: Hohner stitching heads Consist of: -Slitter Cutter Creaser -Inline Bookletmaker DBM 5000 -Auto Spine Master -DBM -500T

ram hammer weight: 480 kg stroke: 710 mm throat: 550 mm impact capacity: 1250 kpm no. of strokes: 210 Hub/min ram hammer stroke: 710 mm work height max.: 720 mm total power requirement: . kW weight of the machine ca.: 7,4 t dimensions of the machine ca.: m pressure: 400 kg Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: IQ-glass sulution /Lisec Type: Line Scanner + 2x RTV- 27- 25 Solution Model: Soft Solution Serial Number: AF1/2010/0252-03 Construction year: 2011 Weight: 0,5 tons Power: +/- 2A Length mm: 4360 (1,1+ 2x 1,6) Width mm: 1100 Height mm: 3400 Working height: ± 53 cm Transport size L x W x H: 4,36 x 2,5 x 2,0 Min.-max. glass thickness: 3-25mm Min.-max glass size: max 2500 Condition machine : As is Control type: Glas-IQ.com Electric. Connection: 230v Missing parts: Unknown Documentation: Request by infoglass-iq Instructions: Request by infoglass-iq Electric diagram: Yes Parts list: Number of spare parts Available software: Present Photos/film available: Photos and video available Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting table (23076), Robot kit (23077), Cork pasting machine (23078), ...

max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...

pressure: 80 t throat: 250 mm stroke: 10 - 115 mm no. of strokes: 60 Hub/min dayligth: 285 mm distance table - lower edge of ram: 400 mm ram adjustment: 50 mm table-size: 500 x 750 mm ram head dimension: 340 x 440 mm work height max.: 700 mm table hole: 220 mm ram hole: 45 mm total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 1,4 x 2,5 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high  ...

bore capacity in steel (diameter): 30 mm x-travel: 850 mm y-travel: 435 mm Control: HEIDENHAIN TNC 150 total power requirement: 16 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle tape ...

sheet width: 1020 mm plate thickness: 2,5 mm distance between columns: 1045 mm daylight opening: max. 47 mm bending angle max.: 135 ° weight of the machine ca.: 290 kg dimensions of the machine ca.: 1,35 x 0,86 x 1,17 m Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PVV4-1x/082RA15UMC R9000053997

Heidelberg Printing Press Speedmaster - 74 - 2P - H Year of manufacture - 1996 converted to 1998 machine Number of prints: 161 million prints Format: 510 mm x 740 mm EQUIPMENT: - CP-Tronic machine control - CPC 1-04 color remote control - Semi-automatic turning - 15000 sheets/hour - Substrate: 0.03 – 0.6mm - Double-sheet control - Alcolor film dampeners with circulation and cooling Baldwin - Autoplate - Plate clamping system - Automatic - Automatic blanket washing device, - GTW and other components have been kpl. - Modified to the 1998 version - Automatic counter-pressure washing device - Automatic roller washer - Powder: Grafix - Alphatronic 200 - High pile delivery - Standard accessories - Machine was completely repaired before dismantling. printed. - Machine is disassembled and ready for shipment. - Location of the machine: Switzerland Machine is techni ...

closing pressure: 4360 kN table-size: 730 x 730 mm control: B+R Industrieelektronik draw back pressure: 190 kN ajustment speed: max. 60 mm/sec return speed: max. 90 mm/sec daylight between the columns: 900 mm = vulcanizing press with vertical closing unit, with form removal and form separation device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 14,5 / 29 m/sec grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4,0 kW 100% ED weight: 84,0 kg range L-W-H: 1.080x520x1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stratasys FORTUS 900mc 3D printer YOM 2015, USA Computer Numerical Control (CNC)- Brand: Touchworks Technology: Fused Filament Fabrication (FFF) Materials: Thermoplastics. Polymers/Thermoplastics: PLA, Polyesters, Polyamides, Polycarbonates, Styrenes: ABS, ASA, Polysulfones, Polyaryletherketone, Polyimides Two vials for main material 1508 cc Two vials for fixing material 1508 cc Automatic switching from one vial to another Feedstock format: Filament 95% rate of yield Total Installed Capacity: 7,5 kW Working volume (XYZ): 914.4 x 609.6 x 914.4 mm Details up to 200 kg Build volume 508.756164 L Min. layer thickness 0.51 mm X/Y accuracy: +/- .089 mm or +/- .0015 mm per mm, whichever is greater. Z part accuracy includes an additional tolerance of -0.000/+ slice height. Note: accuracy is geometry-dependent. The vacuum board is adapted for use with two sizes of construction s ...

Machine Name: Chamber Filter Press Manufacturer: MSE Type: KPF 800-43-25K P-L-S Year of construction: 2002 Design: Side rail press Filter pressure: 15 bar Press capacity: approx. 540 litres Expiration: Open Filter area: Approx. 48 m2 Plate size: 800 x 800 mm Number of plates: 44 Panel material: Polypropylene Plate Transport: Automatic Filter cloth washer: No Panel package length: Approx. 2460 mm Cake thickness: 25 mm Closing pressure: 380 bar Dimensions: L 4800 x W 1500 x H 1980 mm Empty weight: 4600 kg Tech. Documentation: Yes Accessories: Control cabinet, a hydraulic system, a light barrier, drip trays, access platform, Netzsch feed pump and 3 x filter cake containers Condition: Used good Price: On request

pressure: 63 t distance between columns: 320 mm stroke: 8 - 120 mm table-size: 800 x 600 mm ram surface: 500 x 400 mm throat: 315 mm dayligth: 410 mm ram adjustment: 70 mm no. of strokes: 56 / 90 Hub/min total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions: 2,10 x 1,52 x 2,72 m inclinable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg fork length: 1800 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/PU fork arm (length x width x thickness): 1800 x 155 x 50 mm weight of the machine ca.: 0,088 t dimensions: 2,15 x 0,54 x 1,20 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Engine, Type number: 6090SFM75

Type: Engine, Type number: 6090SFM75

Type: Engine, Type number: 6090SFM75

Type: Engine, Type number: 6090SFM75

table length: 855 mm table width: 500 mm stroke height: 900 mm : 340 mm weight max. in kg: 500 kg weight of the machine ca.: 0,085 t : 950 x 550 x 450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): ca. 700 x 500 x 1.080 mm current intensivity: 0,73 / 0,42 A weight: ca. 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg Working height minimal: 350 mm Working height maximum: 1800 mm max. torque: 3000 Nm 0: 1 U/min adjustment speed: vertikal 560 mm/min vertical adjustment: 1450 mm baseplate diameter: 600 mm rotation movement: 0,75 kW stroke drive: 1,85 kW height of the plant: 2505 mm weight: 1047 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical360° left/right rotation. A typical configuration is composed of a motorized headstock p ...

Type: Engine, Type number: 4045HRT90

sheet width: 1020 mm plate thickness: 3,5 mm roll diameter: 90 mm total power requirement: 0,75 kW weight of the machine ca.: 310 kg Electric 380 Volt: Foot switch: Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1250 kg Working height minimal: 540 mm Working height maximum: 1120 mm table diameter: 800 mm swivelling range: --> 95 Grad max. torque: 490 Nm table rotation speed: 2 U/min Working height from to: 540 - 1120 vertikal mm Working height from to: 700 - 1280 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 757 kg dimensions of the machine ca.: 1,76 x 1,63 m Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1275 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 3 kW weight of the machine ca.: 875 kg range L-W-H: 1,7 x 1,68 x 1,1 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Piece counter: Squaring arm: Support arms: The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensio ...