We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,810 used machines on RESALE, but how to find them? Machine Search
used
Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...
used
Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)
new
Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117 / 701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160 - 2250 UpM total power requirement: 1,45 / 1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pu ...
new
Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
I-beam section - flat steel: 80x20 (d1200) mm I-beam section - upend: 80x25 (d2100) mm L-beam: 50x50x6 (d1000) mm bar material - diameter: 40 (d800) mm square material: 60x60x3 (d4000) mm rectangle: 80x30x3 (d6000) mm tube diameter max.: 70x2 (d1600) mm tool adaptor: 60 mm roll diameter: 177 mm bending speed: 6,4 m/min total power requirement: 4 kW machine weight ab.: 970 kg Overall size: 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
2 x 3.6MW 60Hz MAN 18V28/32H Power Plant for sale At a time when the world is suffering from a shortage of power generation capacity, we are very pleased to inform you that we have a nice 7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil / ...
new
Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 Short spindle: MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: 7 TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the disp ...
new
: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 23 thread capacity: M10 bore stroke: 90 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 150-1.250/350-3.000 UpM total power requirement: 0,75 kW Overall size: 735x470x1080 mm weight of the machine ca.: 106 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 20 bore stroke: 80 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 210-2.500 UpM total power requirement: 0,38 kW Overall size: 620x470x1050 mm weight of the machine ca.: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Nozzle tube system(s) three-dimensional Basket diameter 600 mm Basket load 100 kg Usable internal height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - Weekly timer - Water deficiency protection - Chip/particulate filter with bath cover plate - Vapour extraction Automatic level replenishment: - automatic level supplementation Function blowing off / drying: Pulse compressed air blow-off three-dimensionally Lye care: Disc oil skimmer – discontinuous oil discharge – For floating/demulsifying oils Bag filter system type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺAfterʺ Filtration Emptying and cleaning the system (occupational health and safety): Pumping device/flushing of the tank bottom Hose/nozzle in aluminium/plastic Option – AM execution: AM version for additional manual cleaning (high ...
new
cutting diameter: 800 mm saw band length: 9600 mm cutting width: 1300 mm capacity 90 degrees: square: 800 x 800 mm : 1300 x 750 mm : 800 mm : 770 mm Capacity 45° rectangular: 570 x 750 mm capacity 60 degrees: round: 570 mm capacity 60 degrees: square: 770 x 770 mm capacity 60 degrees: flat: 570 x 750 mm : 800 mm : 770 mm : 1070 x 750 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 12,42 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 5,05 x 2,2 x 2,9 m Product Description PRODUCT DESCRIPTION Two way powered mitre with NC angle setting Features ?Powered mitre setting with NC control ?Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ?5-deg inclined blade for optimum cutting performance ?Hydraulic blade tensioning ?Blade deviation control with auto shut off ?Cutting feed & pressure regulation ?Material height sensor with rap ...
used
Motor output: , kW automatic: , Table dimensions: , mm ! Please notice the VIDEO of this unit ! For window producers we recommend a spinde with 40 mm diameter and 160 mm usable length, Tools should have inside diameter of 110 to 120 mm Attached the description with options as pdf-file. Price list on request! For window production the manufacturer recommends following options of price list: Art.-Nr.bo1000 base unit Art.-Nr.bo1050 protection Art.-Nr.bk0180 arc marker Art.-Nr.gt0250 glazing bead construction 1 lengthenning : bo1720 ot bo2510. (technical details according to manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
length: 3000 mm Wheel width: 500 ( 450 ) mm work height max.: 880 (+/- 60) mm Description: - 3000 mm roller and measuring track type Exakt A standard - with digital position indicator el. connection 230 V 50 HZ with power pack - Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm) - Measuring stop can be adjusted from the workplace by means of a hand wheel - with pneumatic brake for fixing the dimensions. - Stable material stop trolley, 12 ball bearings - on a large guide profile. - The stop is adjustable and can be folded back manually. - Basic version of roller and measuring track - in stable steel construction, all versions are stationary - The max.measuring length is the track length minus 450 mm - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with axis Ø 15 mm - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web ...
750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...
used
7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil / Heavy Fuel Oil - Plant Auxiliary Equipment: 1 set
used
I-beam section - flat steel: 220 bei Dm 1200 mm I-beam section - upend: - mm angular steel - leg outwards: 110x110x14 bei Dm 1000 mm angular steel - leg inwards: 80x80x10 bei Dm 1000 mm flat steel flat: 100 x 20 bei Dm 1000 mm T-steel / side out: 120x120x13 bei Dm 1200 mm U-iron on the x-axis: 22 bei Dm 1200 mm pipes: 102 x 6 bei Dm 900 mm round material: 75 bei Dm 700 mm square material: 60 x 60 bei Dm 600 mm bending speed: 3,5 m/min No. - Rolls: 3 Drive: 7,5 kW shaft diameter: 125/135 mm weight: 6,4 t dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m Condition: ready for operation: Electric 380 Volt: Set of standard rolls: I + H Motorized adjustable rollers: Control panel: Central lubrication: autom. Rolls for round material: 100 mm Machine manual: Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers, ...
used
3-jaw-chuck diameter: 240 mm weight of the machine ca.: t for table usage: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 810 mm saw band length: 8400 mm cutting width: 910 mm capacity 90 degrees: square: 770 x 770 mm : 910 x 750 mm : 600 mm : 600 mm Capacity 45° rectangular: 760 x 600 mm capacity 60 degrees: round: 360 mm capacity 60 degrees: square: 360 mm capacity 60 degrees: flat: 750 x 360 mm : 760 mm : 740 mm : 750 x 740 mm speeds steplessly adjustable: 20 - 100 m/min table height: 725 mm dimensions of saw-band: 8400 x 41 x 1,3 mm total power requirement: 5,62 kW weight of the machine ca.: 4,05 t dimensions of the machine ca.: 4,02 x 1,6 x 2,45 m Product Description PRODUCT DESCRIPTION Two way powered mitre with NC angle setting Features ?Powered mitre setting with NC control ?Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ?5-deg inclined blade for optimum cutting performance ?Hydraulic blade tensioning ?Blade deviation control with auto shut off ?Cutting feed & pressure regulati ...
TECHNICAL DATA INTERNAL MIXER: MODEL: GK 135 E - with interlocking rotor geometry VOLUME OF THE MIXING CHAMBER: 140 ltr. USABLE VOLUME: approx. 100 ltr. BATCH WEIGHT: approx. 120 kg SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and VFC can be offered). ______________________________________________________________________ _____ TECHNICAL DATA HEAVY DUTY INTERNAL MIXER: MODEL: GK 135 E - with intermeshing rotor geometry VOLUME OF MIXING CHAMBER: 140 ltrs. USEFUL VOLUME: approx. 100 ltrs. BATCH WEIGHT: approx. 120 kgs ROTOR SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body and hydraulic hopper. The gearbox ...
used
Machine Details Warehouse number 1105-03409 Machine Type Machining Center - Vertical Brand MIKRON - HAAS Type VCE 1000 VF 3 Year of construction 1998 Control type CNC Control Haas Storage location FRANCE Country of origin USA Delivery time immediately Freight base EXW (Incoterms 2010) Technical details x-displacement 1016 mm y-way 508 mm z-way 635 mm Control Haas Table clamping surface 1219 X 457 mm Rapid speed 25 m/min Table load 1000 kg Speed range 7500 1/min Drive power - Milling spindle 15 kW Number of tools in the magazine 20 pieces Tool holder SK 40 Information IMMEDIATELY FREE IN GOOD CONDITION UNDER POWER
new
Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete ...
used
I sell a 3-axis CNC machining center SCM Morbidelli Author A630S with truss table Year of construction 2004. Configuration: 3-axis main spindle SCM 6.6kW 24,000 rpm Tool magazines 2 x 6 positions ISO30 on the head Second 3-axis main spindle SCM 6.6kW 24,000 rpm Second tool magazine 6 positions ISO30 on the head 1x groove saw X-direction Drill head 12+4+4 drilling spindle fully equipped Usable work surface 3050x1370 x Z 180mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Pump Gardner Denver 215/260 m3/h. Xilog Plus new software with operating instructions. Very good condition. Available the same.
used
DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h
TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF THE MIXING CHAMBER: approx. 250 ltr. USABLE VOLUME: approx. 190 ltr. BATCH WEIGHT: approx. 230 kg ROTOR speeds (standard): 0-60 rpm DRIVE POWER: 1500 kW Hydraulic feeding with 2 hydr. Cylinders The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and FU can be offered). ______________________________________________________________________ _____________ TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF MIXING CHAMBER: approx. 250 ltrs. USEFUL VOLUME: approx. 190 ltrs. BATCH WEIGHT: approx. 230 kgs ROTOR SPEEDS (standard): 0-60 rpm DRIVE POWER: 1500 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body ...
used
Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...
new
El. heated chamber furnace, make VEI type: VEI_KO_EB max. temperature: 450°C connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm
used
all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control
used
DBK David + Baader GMBH Industrial Furnace Electrically heated Convection oven Type ITVU 200° TYPE ITVU Identification number 870233 Year of construction 2006 Usable space 2.8 m3 Steam room 3.9 m3 Weight 850 kg Temperature 200° Rated voltage 400/230V 50Hz Power supply 21 kVA Heating capacity 18 kW Rated current 31A Pre-fuse 50 A Protection class IP 43 Exhaust air volume flow 230 m3/h
used
Sat B2599A drawer oven 130 °C If very different products or product lines with equally different tempering times are to be treated independently of each other in the smallest space, drawer ovens are the smartest ergonomic solution. Data of the furnace Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the furnace Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in every drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in usable volume, at stabilized state: +/-3°C at 80°C Frame: The basic structure consists of an unalloyed steel girder structure, on which the exterior lighting made of unalloyed steel painted in RAL 1013 (pearl white), applied. The furnace inner housing is made of aluminized sheet steel ...
used
GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...
used
Other Info: Power Honing machine MACH-id 5223 MAKE SUNNEN USA TYPE ML 2000 YOP 2013 DIMENSIONS Length 1600 mm Width 1220 mm Height 1900 mm
used
TECHNICAL SPECIFICATIONS (Cone Mixer) Manufacturer: KNIELE Name: Cone Mixer Type: KKM 2000 / 3000 Version: with bevel gear Year of construction: 2008 Output quantity: 2.0 cbm Capacity: 3,000 l Three-phase motor agitator inside: 45 kW Three-phase motor agitator outside: 37 kW Mixer lining: Ceramic Mixing system for ready-mixed concrete consisting of: - KNIELE Cone Mixer KKM 2000 / 3000 - Elevator system with bucket - Feeder scale - Cement scale - Water dosing system - 1 x 100 t cement silo (double chamber) - 1 x 80 t cement silo (double chamber) - 1 x 60 t cement silo (double chamber) SPECIFIC COMMENT - Aggregate storage for the most part no longer usable - Machines will be dismantled in the near future and ready for loading If you are interested, we can send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis
used
Turning diameter: 510 mm Turning length: 400 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T MAKE` Daewoo Korea TYPE PUMA 200 C YEAR 11.1998 SPECIFICATIONS Swing over bed Ø 510 mm Control Fanuc 18 T Swing over cross slide 330 mm Distance between centres 400 mm Spindle bore 76 mm Spindle speeds / ranges 4500 Rpm Power 15 Kw DIMENSIONS Length 2660 mm Width 1635 mm Height 2000 mm
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...
used
1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. Max. usable cabine dimensions: 670 mm (height) 610 mm (width) 750 mm (depth). unit is as good as new.
used
Machine Details Warehouse number 1105-03591 Machine type bed milling machine - Universal Brand KIHEUNG Type KMB 3 Year of construction 2012 Control type NC Control HEIDENHAIN TNC 124 Storage location FRANCE Country of origin KOREA Delivery time immediately Freight base from stock, freely loaded Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Speed 15 - 2000 1/min Spindle 9 kW Recording ISO 40 Control HEIDENHAIN TNC 124 Table size 1,700 x 470 mm Table load 2 t Rapid traverse longitudinally and transversely 10 m/min Rapid traverse vertical 4 m/min Total power requirement 18 kVA Machine weight approx. 6.5 t Information UNIVERSAL HURON HEAD HEIDENHAIN TNC 124 ISO 40 HOLDER 10 STUCCO Manuals
used
turning diameter: max. 42 mm turning length: ca. 120 mm control: 160i-TB Fanuc Main spindle:: max. usable bar diameter: 42 mm Max. speed main spindle: 6.500 min/-1 power capacity - main spindel: 7,5 / 5,5 kW C-Axis: 0,001 ° Subspindle:: max. usable bar diameter: 42 mm Max. Speed Subspindle: 6.500 min/-1 power capacity - Sub spindle: 7,5 / 5,5 kW C-Axis: 0,001 ° slide I:: x-axis: 65 mm y-axis: 350 mm z-axis: 120 mm rapid traverse: 30 m/min Accelaration: 5/10 m/s² feed power: max. 350 daN Tool Slide I:: number of toolpositions: 10 (6+4) pos. Number of fixed tools: 6 pos. Number of driven toolspositions: 4 pos. collets: ESX 20 slide II:: x-axis: 265 mm z-axis: 320 mm rapid traverse: X: 18 / Z: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Slide Y2:: y-axis: 326 mm rapid traverse: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Tool Slide II:: number of toolpositi ...
used
- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...
used
2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm
new
FILM WIDTH 10 cm - 20 cm RECOMMENDED FILM THICKNESS 17μ, 23μ, 25μ PE/PVC film WORKING SPEED 10 m/min. Dimensions of the goods to be packaged: max width 95 cm height 45 cm Power supply 2.2 kW 3-phase 380/400 volts Compressed air connection 6 bar PACKAGING MACHINE FOR FURNISHINGS SUCH AS BATHROOM AND KITCHEN FURNITURE OR DOORS DOOR FRAMES OR TRIM LAMINATE FLOORS ALUMINIUM PROFILES STEEL PROFILES WOODEN PROFILES AND TUBES OF STEEL ALUMINIUM OR PLASTIC Max length infinite Min dimensions (width x height x length) 100 x 18 x 600 MM Conveyor carpet Usable length 1924 MM Total length 2000 MM Working height 915 MM Electric motor from conveyor belt 0,55 kw conveying speed 12 m/min Details of stretch film width of stretch film 200 mm Max diameter of stretch film roll D 230 mm Inner diameter of the roller core 76 mm Recommended film thickness 23/30/35 micron General te ...
new
Aluminium format slide (anodized) with hardened Steel guide rods. Non-return protection at thickness planer. Anodized parallel fence with micrometric fine adjustment. Inclined adjustment of the saw blade up to 45° by means of a hand wheel. Table opening ø190 mm with undercounter extraction. Milling stop 180 mm. Built-in milling spindle lock. Layout table with telescopic stop, Eccentric clamp, degree grid made in EU ! Dressing unit: Table width 410 mm Table length 1800 mm Planer shaft diameter 100 mm Number of planing knives 4 pieces Shaft speed 5000 Motor output power 5 kW S6 400V (4kW S1) Thickness unit: Thickness passage, min/max 4 - 230 mm Feed speed 7m/min Milling machine: Usable length of the spindle 125 mm Spindle height adjustment 160 mm tool diameter for profiling 180 mm for tenon cutting 250 mm Spindle speed 8000/6000/3500/1400 Table openings 1 ...
used
It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace
used
Double chamber furnace, make Cieffe The furnace consists of: - 1 nitriding chamber with an operating pressure of 0.5 bar, - 1 quenching chamber with an operating pressure of 15 bar, - 2 cooling chambers, each equipped with an air/water heat exchanger, with a working pressure of 15 bar. The cooling chambers are installed above the quench chamber. The nitriding chamber and the quenching chamber are separated from each other by two sealed doors. type: NCV refurbished year: 2003 connected load: 436 kVA charge weight: max. 2,500 kg usable dimensions (W x H x D): 910 x 800 x 1300 mm type of heating: open flame gas burner heating areas: 2 heat output: 235 kW operating temp.: max. 700°C vacuum: 2.5 x 10-2 mbar pump capacity: 250 m3 / h quench pressure: 15 bar cooling gas: N2 / 190 m3 / h
used
It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm
new
Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...