KOCH used machine for sale

approx. 130 pieces 1,90m Mutibox Art "Corletten" - used - : Prices per piece ex site: 89.- € (net)! We reserve the right to a minimum purchase quantity., Primarily complete sales! Manufacturer: unknown, probably Koch Type: universal Year of manufacture: unknown Dimensions: approx. width: 1900mm + depth 1170mm + height: 1900mm Foldable Not stackable! Partly with runners Available: now Condition: good Location: A-1220 Vienna

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

AUTOMATION FOR THE PLASTIC BUCKET INDUSTRY Year of manufacture 2016 Up to 1800 buckets per hour Performance data Shapes: round, oval, square Stacking height: 1200 mm Article sizes: 1 l - 12 l or 10 l - 30 l Quick-change device Servo control with 4 axes SPS with recipe management Optical registering conveyor belt

approx. 1.200 pieces Corletten, 1,30m, cook - used - : Prices per piece ex location (net): Price scale: up to 19 pieces: 99.-€ (net) From 20 pieces: 89.-€ From truck acceptance (approx. 70 pieces): 85.-€ Priority acceptance: complete trucks! Manufacturer: Koch Type: Muti – Box 130 Payload: 800kg Dimensions: 1.300mm x 1.150mm x 1.900mm Non-stackable, foldable with runners! Condition: good Available: as of now Location: 99189 Elxleben / Erfurt

Loader - Koch Year of construction: 2017 The loader with container  Price: On request

Dosing unit - Koch Year of construction: Drum dosing unit with mixer, manually controlled by time and number of rotations Price: On request

voltage:400 V The glass module with a diameter of 300 x 200mm has been broken and repaired (see picture). A new part can be installed on request (EURO 370, -). Payment: 100% prior to delivery

Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm

According to the description below

CKT 500 52 kW heating to dry cooking dryer is sold by granulate or regrind. Container for approx. 800 kg bulk.

Dowel insertingunits: ja St. Number of spindles: 1 St. Dowel diameter: 8 mm boring diameter: 8 mm Number of heads horizontal: 1 St. Number of heads vertical: 1 St. loading dimensions L x W x H: 4000x1500x2000 mm weight: 2000 kg WinDoor 10 dowel driving machine ---------------------------------- Manufacturer description: EQUIPPING THE HORIZONTAL DRILLING STATION 1 drill motor 0.9 KW with 1 drill spindle Drill speed: 3,000 rpm Drilling depth: max. 60 mm Drill holder in collet, with dowel hole blowing 1 piece dowel hole drill D = 8 mm Z AXIS (DRILLING HEIGHT): Program controlled at 6 drilling heights Y-AXIS (DRILLING DEPTH): Program-controlled, automatic adjustment to 6 different dimensions. EQUIPPING THE GLUE APPLICATION AND DOWEL INSERTION STATION 1 dowel driving tool Dowel diameter 8 mm Dowel length 60 mm Dowel projection variable TOLERANCES FOR WOODEN DOWELS Dowel length: +/- 1 mm Dowel ...

Air volume:110 m³/h Article: Dryer for plastic granulate Manufacturer: Koch Technik Type: CKT110 Control system: SIEMENS S7 Year of construction: 2014 possible dry air volume: 110 m³/h The machine has only run twice Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocells Approx. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg

Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and round Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Single dimensions , 1500x1500x1000 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 3,000 x 2,000 mm, weight approx.: 400 kg

Description: KOCH CENTRONIC Sawing, Drilling and Dowel Inserting Machine Approx. Onsite Dimension. (l x w x h): 5,520 x 2,030 x 2,170 mm, weight approx.: 4,500 kg

Description: 12 pieces, tolerance (resistance value) +/- 5%, thermal time constant approx. 850 sec Approx. Onsite Dimension. (l x w x h): 600 x 400 x 600 mm, weight approx.: 40 kg

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

Machine for cutting, milling, drilling and dowelling frames or rails, straight or mitre, with or without counter profiles in small batch size or one-off production Workpiece length 160 - 2350 mm. Workpiece width: - 20 - 140 mm for 2 workpieces per field - 20 - 100 mm for 2 workpieces per field at 45 ? - 20 - 300 mm for 1 workpiece per field Workpiece thickness 10 - 30 mm. Angle adjustable between 45 ? and 90 ? Tables can be tilted 25 ? PC controlled on 3 axes Drilling and inserting on point-to-point basis Equipment: Sawing station: saw blade 350 x 30 mm, motor 2.2 kW, 2800 R / min Drilling station: drill bit diameter 10 mm, motor 2 kW Milling station: diameter tool 100 - 200 mm, spindle diameter 40 mm, clamping length 70 mm, motor 3 kW, 6000 - 12000 R / min Dowelling station: dowel dimensions 8 x 30 mm, 8 x 20 mm

Manufacturer: Koch Windoor, Type: BL-51-NC, Year: 1998, Control: Beckhoff, Work piece width min-max mm: 30-200, Milling spindles horizontal: 2, Feeding speed max m/min: ca.80, Drill vertical Y: 5, Horizontal drills-X: 9, Number of milling spindles: 4, FREE TEXT: Dübelwerkzeuge 3, Year :1998

Manufacturer: Koch Säge Bohr und Dübelanlage, Type: SBD-30-A, Year: 1991, Control: Koch, Work piece width min-max mm: 30 - 130, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 20 - 40, Saw diameter mm: 300, Drilling gearbox number horizontal: 2, Re-charging: yes, Dovel insertion: yes 10-12 mm, Workpiece magazine: yes, Work piece refeeding: yes, Glue monitoring: yes, Drill spindle pitch mm: 17/22/30/35, Year :1991

Manufacturer: Koch, Type: Compact, Year: 1994, Control: NC, Work piece width min-max mm: 200, Min.-max. workpiece length in mm: 150-2100, Min.-max. workpiece height in mm: 10-80, Saw diameter mm: 400, Drilling support horizontal: 2, Drilling gearbox number horizontal: 2, Drilling supprt from bottom: keine, Drill spindles per support: 5, Drill-beam 90° swivel mounted: yes, Grid 32 mm: 17/22/35/30/124, Year :1994

Manufacturer: Koch , Type: SBD-B, Control: Siemens, Min.-max. working length in mm: 250-2500, Working width min-max mm: 10-150, Min.-max. workpiece thickness in mm: 10-60, Drilling support horizontal: 2, Drill gearings: 6, Drill gearings: 6, Drill support from top: 4, Drill gearings: 6, Drilling engine kW: ca.1,5, Working range max mm: 60, Dovel lenght mm: 10 X 30, Number of doveling tools: 4, Glue high-pressure pump: yes, Glue quantity setting: yes, Dowels horizontal: yes, FREE TEXT: mitMagazin und Rückführung der Werkstücke,

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985