ko used for sale

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg

Kegelrundwirker, Fabr. Benier/Winkler, Type Konus

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 50-60 mm -Grinding wheel: Ø 225 x 40 mm -Shipping/Price: complete -Dimensions each: Ø 225 x 90 mm -Weight: 10.4 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm -Grinding wheel: Ø 210 x 40 mm -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece

Used dissolver Kofama MD600. New 1980.

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

Roller chain, drive chain -Length per package: 5 m -reinforced 16B-1 roller chain -1-fold 1 x 17.02 -Number: 10 packages available -Price: 28 euros/m

Copying head, copying head, dividing head -Copy head: for cam discs -Dimensions: 900/400/H270 mm -Weight: 90 kg

geared motor, electric motor -Speed: 56.6 rpm -Power: 0.6 kW -Design: B5 -Shaft diameter: Ø 28 mm -Brake: 24 V -Protection class: Tropical resistant -Weight: 23 kg

2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.

Used dissolver made by Kofama, model MD500, 500 liters.

geared motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 24 mm -Brake: 24 V -Protection class: Tropical resistant -Weight: 15 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Recording: SK50 -Adjustment range: 20 mm -Tool shaft: Ø 30 mm -Weight: 10 kg

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise dampening and absorption of small vibrations -Size: DN100 -Nominal pressure: 6 bar -Width: 550 mm -Weight: 17.5 kg

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise reduction and absorption of small vibrations -Size: DN100 -Width: 320 mm -Weight: 9.8 kg

bore capacity in steel (diameter): 120 mm arm length: 2500 mm workpiece height max.: ca. 1800 mm bore capacity in cast iron: 160 mm drilling radial min./max.: 880 / 2825 mm throat min.: 555 mm column diameter: 650 mm bore spindle diameter /taper: 90 / MK 6 mm diameter of quill: 160 mm bore spindle turning speed range: 10 - 660 U/min bore depth: 650 mm feeds: 0,07 - 3,0 mm/U distance spindle/base plate: min. 300 / max. 2100 mm vertical adjustment of the arm: 1150 mm base plate surface area: 3000 x 1550 mm total height of machine: 4500 mm total power requirement: 15 kW weight of the machine ca.: 16 t - right-/left spindle run - thread cutting device Accessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -220 V 50 Hz 16 W -PN: 0-3 bar -Price: per piece -Quantity: 6 available -Weight: 0.8 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Cone: Ø B11/B16 -Price: complete -Quantity: 2 available -Weight: 2 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Kowalit, solid rubber tire with rim -Tire size: 18x7-8 Rim 4.33R-8 -Quantity: 1 piece available -Dimensions: Ø 420 x 160 mm -Weight: 19 kg

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Coma Freezer Cell Freezer Cell Freezer Room Internal dimensions: 210cm wide 285cm Depth 203cm high Dimensions: 250cm wide 340cm deep 283cm tall

Brezel-Verlängerung, funktionstüchtig

number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Case Maker Co-pilot system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board pre-loading conveyors Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals.

Korimat KA 160 autoclave, 120 litres, 2.5 bar, MC control, autoclave for sterilisation with core temperature measurement, as a pressure pressure cooker for cooking meat, vegetables, soups and ready meals, electrically heated, circular marbled surface.

max. format 40 x 57 cm Built in 1970 Single sheet feeder Conventional dampening system Price on request. We deliver and install worldwide!

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm serial no.: 526S130 number of spindles: 2 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x120 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell a Konica Minolta AccurioPrint C759 with Fiery IC-418 print controller. The machine was under maintenance contract with Konica Minolta until it was dismantled and is in very good condition. Total Counter: 534,184, Black: 226,878 and Color: 307,306 Price: VHS Preferably pick-up in Munich. Shipping on request and at an additional cost. Vat-ID. available. We have other very good and up-to-date Konica Minolta copiers in stock: 3x Konica Minolta Pro 1100, some Bizhub 3622, some Bizhub C3300i, Bizhub C250i, C360i, C550i, AccurioPrint C759 and AccurioPrint C750i etc.

Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse -Manufacturer: Korrmann, compensating traverse for transporting different loads -Type: TRV 12 -Loading capacity: 12 t -Transport dimensions: 260/10000/H560 mm -Empty weight: 980 kg

We sell a current model of Konica Minolta AccurioPrint C750i Flux with booklet finisher. Low meter reading. The copier was under maintenance at Konica Minolta until it was dismantled and is in very good condition. Konica Minolta AccurioPrint C750i Flux with Finisher Booklet Finisher FS-539 SD, Punch Kit PK-524 and RU-519 Relay Unit. Total counter: 156,620, black: 62,867 and color: 93,753. Preferably pick-up at our warehouse in Munich. Shipping on request and assumption of costs. We have other current models from Konica Minolta: Bizhub 3622, C3300i, C250i, C360i, C450i, C550i, AccurioPrint C759 etc. Also 3x Konica Minolta Pro 1100. Ask us, we will get back to you as soon as possible.

16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system

16 to. Krankatze, Kone, CXT, (landing gear, rope, hook) – used - : Price from location: now only 9.500.-€ instead of 12.500.-€ (net), dismantled and loaded! Not included in the sale are: bridge, remote control, coil hook. Manufacturer: Kone Year of Make: 2019 Reference number of the 200967176/10 Order number 4501376439 Electric wire rope hoist Electric train type CXT60410160SA5JDD0S Factory number of the e-train 58704433 Payload 16,000 kg Lifting height 10.5 m Drum Traction - Unfoldable Pitch – Classification M5 Current consumption 68.2 A Total power 36.3 kW Lifting motor Lifting motor type MF13XL200N260FA5132X-IP55 Factory number 58202098 Power (kW) 35 kW Gearbox Type GEN410NB000-D Lifting speed 11.20/0.22 m/min Factory number 58664786 Rope speed -/- Exams Operating voltage 400 V Frequency 50 Hz Control voltage 48 V Factory number - Type of  ...

impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread roll and bread roll line Fortuna + Kövy with Fortuna head machine KM 6 with settling belt Built in 1999 Maximum hourly output 8400 pieces Weight range: 40-80gr In need of an overhaul