128,848 used machines on RESALE, but how to find them? Machine Search
Three-phase motor, electric motor -Power: 1.8 kW -Speed: 1700 rpm -Shaft: Ø 18 x 40 mm -Construction: B3 -Dimensions: 290/270/H190 mm -Weight: 14.2 kg
Measuring device for air conditioning units, air conditioning systems, cooling units -Type: -with: various hoses -Foot: pressure pump -Number: 1x measuring devices with suitcases available -Price: per piece -Dimensions: 340/130/H260 mm -Weight: 5.3 kg
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.
-Lifting tipper König -for König and Diosna Kessel -Weight 950 kg -Height: 235cm
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg
Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Travel: 450 mm -Piston diameter: 25 mm -Dimensions: 40/40/H650 mm -Weight: 1.6 kg
Tool holder, milling tool holder -Recording: SK40 -Tool holder: Ø 28 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 60/60/H210 mm -Weight: 1.5 kg
Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK2 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 190/95/H95 mm -Weight: 3 kg
Mixer-grinder 130 mm Completely made of special stainless steel Holeplate diameter: 130 mm Hopper volume approx. 150 liters Mixing shaft with paddles Machine dimensions in mm: Width: 900 Depth: 1 380 Height: 1 350 Installed power: 8,6 kW Voltage: 400 V, 50 Hz
Pressure press Korrex Nuremberg Korrex Nuremberg , completely overhauled with 3 sets of paint rollers. Electric paint trituration , Washing doctor blade .
Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg
Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4.5 kg/piece
Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 27 x 60 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 250/95/H95 mm -Weight: 3 kg/piece
Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Machine dimensions in cm: Length: 100 Width: 90 Height: 190 Electric power: 2.5kW
KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available
Sandpaper, emery paper, abrasive cloth -Number: 1x item of abrasive cloth (yard goods) -Grains: different -Packed: on EURO pallet -Weight: 168 kg
Quick Snap brush segment, brush, plastic brush -Outer diameter: Ø 105 mm -Outer segment: Ø 86 mm -Reach: 60 mm -Number of teeth: 20 teeth -Width: approx. 105 mm Price: per piece -Number: 44 available -Weight: 0.35 kg/piece
Used head machine KÖNIG, Type: Mini Rex Futura -Overhauled- - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - 2 rows - new tapes - new Teflon - Wear parts renewed (completion 15 January 2023) - 6 months warranty - Condition: Very good, ready for immediate use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.
Three-phase motor, electric motor -Power: 0.25 kW -Speed: 920 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 33 -Dimensions: 230/177/H138 mm -Weight: 7 kg
Chassis, electric motor, DC motor, traction motor, drive motor -Chassis: for forklifts -with slewing ring and drive (steering) -Wheel: 240 x 105 mm -Quantity: 1 piece available -Dimensions: 425/430/H670 mm -Weight: 100 kg
4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm
Replacement - control stage for old Dalex systems SF 16/25 1 time asynchronous welding time limiter S_21.91007.1
Gear motor, electric motor, electric gear motor -Speed: 110 rpm -Power: 0.25 kW -Diameter: Ø 15 mm -Construction: B3 angle -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H175 mm -Weight: 7.5 kg
Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 33 -Brake: 220 volts -Number: 1x motors available -Price: per piece -Dimensions: 165/160/H315 mm -Weight: 8.8 kg
Gear motor, electric motor, three-phase motor -Speed: 24/210 rpm -Power: 0.04/0.55 kW -Construction: B3 -Diameter shaft: 24 mm -Protection class: IP 44 -Brake: 220 V -Fan motor: 380 V -Dimensions: 675/200/H210 mm -Weight: 31 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 136 by 178 mm 31 mm high -Drawing with the photos -Dimensions: 330/90/H220 mm -Weight: 13 kg
diameter: 130 mm length: 400 mm spindle taper ISO: 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 550 mm tool adaptor: SK50 power requirement: . kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DM 750 x 60 x 304,8mm unused in original box. Specification: CS25A 802 JJ6 VK1 For stainless material. Piston rods were ground with it.
Gear motor, electric motor, electric gear motor -Motor power: 0.25 kW -Speed range: 3.25 rpm -Construction: B3 angle -Drive shaft: gear -Number: 1 piece motors available -Dimensions: 450/200/H360 mm -Weight: 40kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 189 mm -Width: 16 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg
Gear motor, electric motor -Speed: 34 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 145/200/H280 mm -Weight: 8 kg
throat: 550 mm tool adaptor: SK50 power requirement: . kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet
throat: . mm tool adaptor: SK50 power requirement: . kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lift mast, forklift mast, forklift mast, mast, rear forklift -forklift mast -Load capacity: 2500 kg -Lifting height: approx. 3500 mm -Forklift sign: 940 x 405 mm -Dimensions: 560/1000/H2230 mm -Weight: 665 kg
Pore finder, pore finder, surface tester -portable high-voltage pore detector -to locate: pores, cracks and other imperfections -Dimensions: 365/220/H260 mm -Weight: 7.5 kg
Drawbar, drawbar, overrun brake -Drawbar: height-adjustable, cranked, with overrun brake -Support load: 75 kg -permissible total weight: 900 kg -Number: 14x drawbar available -Price: per piece -Total length 2500 mm -Transport dimensions: 1200/800/H450 mm -Own weight: 50 kg -Transport weight 76 kg
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg
Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg
Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg
Three-phase motor, electric motor -Manufacturer: Kobold, electric motor type KOD 566 -Power: 0.18kw -Speed: 920 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Dimensions: 205/175/H130 mm -Weight: 5.5kg
Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters
Product number: 1718 Type: PR600C Serial number: 250 Belt width: 600 mm Power: 380V, 50Hz, 1.7kW Dimensions: 2610 x 900 x 1860 mm Weight: 380 kg For standard crumbs and japanese crumbs
Three-phase motor, electric motor, brake motor -Manufacturer: Kobold, electric motor brake motor type KOD 467 ma -Power: 0.12 kW -Speed: 920 rpm -Shaft: Ø 11 x 20 mm -Design: B14 -Protection class: P 33 -Brake: 0.37 kpm -Dimensions: 245/160/H115 mm -Weight: 6.0 kg
Gauge block, gauge blocks, gauge block holders -Manufacturer: Koba, End gauge holder with quick adjustment -Type: 100-200 -Dimensions: 105/70/H325 mm -Weight: 1.3 kg
maximum number of results exceeded
please refine your search
