128,858 used machines on RESALE, but how to find them? Machine Search
KOLZER DGK 36SV vacuum metallizer was built in 2016 in Italy by Kolzer s.r.l. The machine on offer enables various types of components, i.e. plastics, glass, cups and automotive parts, to be coated with decorative or functional coatings. These coatings give the workpieces a characteristic metallic, mirror or gold effect. The machining process is performed in a deep vacuum. Inside a large chamber, there is a tungsten spiral into which small rods or wires of conductive metals are inserted. A high-power current is passed through the spiral, causing it to heat up to 1500°C. This temperature causes the material to melt and generate vapour. The vapour then spreads out as a cloud of atoms and is evenly deposited on cold objects (cups, foils, packaging), forming a thin metallic layer. The entire cycle takes between 4 and 6 minutes. The thermal evaporation method used in the PVD (Physical ...
Elegant effects for book covers and packaging For industrial embossing of solid grey board in bookbinding and in the further processing of fine packaging. The stabilized embossing head guarantees precise embossing even with non-centred embossing clichés. For blind, relief or film embossing of rigid, flexible and plastic cases at up to 80 cycles/min. The PE 312 processes the whole bandwidth of cover materials with blind, relief or film embossing. Can be adapted for optimal processing of different materials by stepless adjustment of temperature and embossing pressure and by adjusting embossing time in steps of 10 seconds. Matrix plate with hole grid for attaching embossing blocks. Save make-ready time by preparing the matrix plate offline. Application : • Blind, relief or hot foil stamping • Combination of micro-embossing and structure embossing Technical data : Hardcover 1 ...
Bread roll system Kövy KA 2 4- deer hourly output 4800 pcs. for 60x40 and 60x80 cm tilting planks Baker's condition ready for action
An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional
Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment
An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg
An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional
AUTOMATIC WINKEL WOLF KOLBE-ALEXANDERWERK 130 mm The machine is completely factory refurbished by MM SERVICE EOOD with 1 year full warranty.
weight max. in kg: kg fork length: mm stroke height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
RECKERMANN KOMBI 1300 - Heidenhain TNC 114B -Bracket milling machine with TNC114 B retraction control (NC route control) -Year of construction 1987 -Very neat original condition -Travel X/Y/Z 1020x320x450mm -Work table size 1370x400mm -Horizontal / vertical milling device -Vertical head swivels +/- 90 degrees -Vertical milling head with drilling quill 80mm -Quill stroke -Speed range - Vertical 33 - 1800 rpm / 16 steps -Speed range - Horizontal 22 - 1200 rpm / 16 steps -Tool holder ISO 50 -Automatic feeds / rapid traverses in all three axes -Feed speed X-axis 10-1000mm/min -Y-axis feed speed 10-1000mm/min -Feed speed Z-axis 4-400mm/min -Drive power 11KW -Coolant device -Work light -Various milling mandrels + machine-related accessories -Documentation Dimensions: LxWxH 3.3x2.6x2.1 meters / Weight 4500KG
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t Optional: with Bollegraaf steel plate strip according to picture
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
ZTS KOSICE LE 160 C eccentric press was built in 1988 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is in very good technical condition and has been regularly maintained throughout its service life. All control solenoid valves were replaced in February 2023. ZTS KOSICE LE 160C is an excellent choice for a wide range of workpiece machining, i.e. punching, cutting and stamping. All of these machining processes are performed with a high press force of 160 tonnes, which, combined with a rigid design, enables the production of parts with high repeatability and excellent precision. The ZTS LE 160 C eccentric press weighs 10150 kg. Technical specifications of the ZTS KOSICE LE 160 C press - maximum press force: 160 t (1600 kN) - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 30/min - maximum slider stroke: 120 mm - ...
working width: 6 m Number of gangs: 4 0 Number of folders: 1 0 Number of rollers: 1 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
working width: 6 m Number of gangs: 5 0 Number of folders: 2 0 Number of rollers: 2 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reference No: PP-57520 Category: 5 Colors Manufacturer: Komori Model: GL 540 Year Built: 2011 Number of Colors: 5 Impression Count: Not specified Working Hours: Not specified Speed: 1,600 sheets/hour Maximum Size: 720 × 1030 mm Minimum Size: 360 × 560 mm Condition: Good Location: Europe Availability: Immediately Machine Description 5 Color + Coating Skeleton Cylinder PQC-S Console Control Desk KHS-AL: Waste Reduction System PDCS II Densitometer: Quality Control Preset: Automatic Size Setting Non-Stop Feeder & Delivery Ultrasonic Double Sheet Detector Electromechanical Stream Controls FAPC Fully Automatic Plate Changing Komorimatic Dampening System Coating Unit: Harris & Bruno Doctor Blade System Automatic Ink Roller Washing Device Automatic Impression Cylinder Washing Device Automatic Blanket Washing Device Technotrans Beta C. Combi Refrigeration / Rec ...
Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm
Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price
Handy hydraulic punching bracket with 70mm projection. Maximum punching capacity Ø24mm in 16mm steel. A double-acting hydraulic unit with a maximum printing capacity of 700bar. This new machine comes from a warehouse clean-up. Additional punching tools would be sold separately.
Corundum disc mill Manufacturer: Koruma Type: T-3 Item #: 564 Year of construction: 1974 Power: 13 kW very good condition with funnel with outlet chute (coolable) with cable & plug LBH: 700 x 500 x 1350
Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).
Vacuum deaerator Manufacturer: Koruma Type: ERV (nameplate missing) Motor power: 1.1 kW with two pumps, speed controlled good condition LBH: 1500 x 750 x 2100 mm
Control Heidenhain ... TNC 640 Clamping table surface ... 1200 x 500mm Axis X ... 1040mm Axis Y ... 540mm Axis Z ... 600mm Spindle speed ... 12000-_/min. controlled axes ... 3 cooling... 25bar SK 40 workpiece weight... 800kg Magazine slots ... 24 L x W x W ... 2900 x 2420 x 2840mm Machine weight... 6400kg The machine is in good condition, possible to test under power.
Guillotine for slicing frozen meat with a capacity of 8000 kg. per hour It can cut molds of frozen meat with a temperature of -15°C to -3°C without defrosting the product during processing. The processed product is unloaded directly into Laska type carts. Technical parameters: Models IB – 4 IB – 8 Productivity- kg / hour up to 4000 up to 8000 Capacity kW 15 15 Max. weight of pieces gr. 200 450 Min. block temperature: -18 °C -15 °C Block dimensions mm. 600 / 400 /200 Machine dimensions: length 1400 width 1130 height 1680 Weight of the machine kg. 720
- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP
Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Tool holder: 27 mm -Number: 9 recordings -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer -for diameters: 20 - 60 mm -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece
Feed screw stainless steel used Manufacturer: KOMEN & KUIN D.V. Diameter approx. 500 mm, Conveying length approx. Mm Stainless steel Drive 3 kW 380 / 420 V Total dimensions approx. 4 x 1.6 x 1.6 m. The screw was mounted on this screw blancher Changes and errors in the technical data and information excepted.
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)
Gear motor, electric motor -Speed: 90 rpm -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Dimensions: 500/220/H240 mm -Weight: 27 kg
maximum number of results exceeded
please refine your search
