ko used for sale

clamping width: 200x75 mm : , max. clamping width: 200x120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...

New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: Production machine Product Overview: We offer the MB 12 - KSH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: Closed Cabin Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working  ...

Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg

Ground meat portionning line Mado Category Used meat processing machines Subcategory Lines Type Lines Height 950 Width 1100 mm Length 2700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel

Bone Band Saw KOLBE K330 S Specifications: Type: Kolbe K 330 S 400 V / 50 Hz / 1.5 kW / 3.4 A Year of Make: 2014 Cutting side passage max.: 280 mm Max. cutting height clearance: 300 mm Table dimensions: L59 x D76 cm Machine dimensions: H180 x W75 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base, height-adjustable Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone flour container is included Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. Sale according to § 25a of the Value Added Tax Act of margin taxation. A proper invoice will  ...

Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 specifications: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t

Product number: 1915 Type: BR3000/600 Serial number: 888 Belt width: 600 mm Frying length: 3000 mm Heating: thermal oil, 90kW Power: 3 x 380V, 50Hz, 3.6kW Dimensions: 5650 x 1800 x 3450 mm Weight: 2150 kg Hold down belt, sediment removal, circulation pump, oil level control Prepared for CO2 fire extinguisher

Radial drilling table Dimensions LxWxH 600 x 750 x 550 mm Tilting 0o - 90o This radial drilling table is unused

Fully automatic baler Manufacturer: PAAL Type KONTI 325 C Operating hours: 16,316 h Year of Make: 1994 Technical manufacturer data: Press force: 80 t Specific pressing pressure: 10.3 kg/cm² Drive power: 1 x 45 kW Total connected load: 70 kW / 140 A Throughput under operating conditions: 240 m³/h Performance at: 35 kg/m³ Bulk density: approx. 8.56 t/h 60 kg/m³ bulk density: approx. 14.0 t/h 100 kg/m³ bulk density: approx. 22 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 4-fold vertical + preparation for additional 3-fold horizontal bonding Machine weight: approx. 28 t Bale weights: 525 to 725 kg Including: - Free kicks - Wirbulator 15 kW

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

Fully automatic baler Manufacturer: PAAL Type KONTI 325 C Operating hours: approx. 45,000 h Year of Make: 2004 Technical manufacturer data: Press force: 94 t at 300 bar Specific pressing pressure: 10.3 kg/cm² Drive power: 1 x 75 kW Total connected load: 92 kW / 170 A Throughput under operating conditions: 340 m³/h Performance at: 35 kg/m³ bulk density: approx. 11.5 t/h 60 kg/m³ bulk density: approx. 20.0 t/h 100 kg/m³ Bulk density: approx. 32 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 4-fold vertical Machine weight: approx. 28 t Bale weights: 525 to 800 kg Including: - Free kicks - Wirbulator 15 kW

Product number: 1930B Type: BR4500/600 Serial number: 939 Belt width: 600 Frying length: 4500 mm Heating: thermal oil Power: 3 x 380V, 50Hz, 10kW Dimensions: 7400 x 1900 x 3150 mm Weight: 2750 kg Hold down belt, sediment removal, circulation pump, electric hoists, oil level control Prepared for CO2 fire extinguisher

Kontron 325 Tenar Low Pressure Gradient Pump Pump HPLC up to 10mL Pumping System -Pump system for tenary low-pressure gradients -All devices for low-pressure gradients integrated in one solution system -10 programs with individual instructions -Column Shock Protection extends durability-Intelligent commissibility compensation -Stackable with other/other HPLC modules -Full control of the AUtosampler 360 via the keyboard with a display Type: double series piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Flow: 0.05 to 10 mL per minute Flow Rate Precision:

Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of Make: 2017 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone meal container (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.

Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm

Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm

Komori GL 40 L 16,500 sheets per hour Plate format: 800 x 1030 mm Maximum paper size: 720 x 1030 mm Blanket size: 920 x 1040 mm Maximum print format: 710 x 1020 mm Stacking height feeder: 1150 mm Paper thickness (skeleton): 0.06–1.0 mm IR dryer Stacking height delivery: 1150 mm KID: Color zone pre-profiling PCC: Prepress interface PDC-SG: Spectral Density Control Display: Extended with infrared dryer Automation: Semi-automatic plate changing (SAPC) Cleaning by spray jet with solvent under pressure: Paint application roller Dampening roller Inspection of the vibrating rollers Continuous feeder Communication via intercom Located: Europe Eastern

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

KOTEC PSD-4520 CNC drilling machine was built in 2020 in South Korea by KOTEC Co., Ltd. The machine, which is designed for drilling precision holes and threading, is an excellent choice for companies specialising in, among others, the construction of machinery or the production of steel structures. The machining process is performed in three axes (X,Y,Z) on a large work area with a length of 4500 mm and a width of 2000 mm. A number of state-of-the-art components, combined with an extremely stable design, guarantee the best results, even during the most intensive machining. All this is complemented by an advanced CNC control with an intuitive interface and all the necessary functions. The KOTEC PSD 4520 CNC beam drilling machine weighs approximately 8900 kg. Technical specifications of the KOTEC PSD-4520 CNC metal drilling machine - number of axes: 3 (X,Y,Z) - feed in the X/Y axis: 4 ...

Axtor 6010 Category: Universal Shredder Manufacturer: Komptech Serial / reference number: 249037 Hours: 4 620 Power: 433kW/589 hp Weight: approx. 25 000 kg Emission class: Tier 4 Final / Stage IV Equipment and description: Overbelt magnet Remote control Advance device Shredder, chipper blades or cantilever chairs Material: good for green waste, bark, logs, splinters and wood waste 2 drum speeds 460 / 810 rpm (modification for cantilever chairs) Drum width 1,543 mm / Drum diameter 1,108 mm / 32 tools, blades Filling height: 2,800 mm / Screen baskets: 60×60, 80×80, 100×100, 125×125 etc. possible / other sizes can be produced Throughput depending on material and operator between 100 and 300 m3/h / Feed hopper over 4 m long / noise emission: 122 dB (A) Transport Dimensions: Length: 11,700mm; Height: 3,750mm; Width: 2,500mm; Towing eye: 50mm

Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.

Screw capping Zalkin with one closing head for aluminum screw cap running direction: right - left capacity: approx. 2,500 fl./h with sorting unit with safety housing

Reference ID PP-53973 Category Bag Machines Manufacturer - Model BL66 Year Built 2003 Color 4 Impression- Working Hours - Speed-- Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description a complete multiwall paper sack line Tuber: 3 unwinders Perforating unit Printing unit with 4 colors Cross pasting unit for up to 3 plies Digital lengthwise injectors for 3 plies - Maximum repeat: 1300 mm, Minimum repeat: 380 mm, Maximum width: 650 mm, Minimum width: 200 mm Transystem Bottomer: Automatic rotary feeder Bottom patch unit each side Double valve unit Maximum depth: 170 mm, Minimum depth: 80 mm, Minimum distance between centers: 250 mm, - Maximum distance between centers: 600 mm (with a maximum depth of 150 mm) A single valve carriage that can hold 2 sheets. Palletizer

Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Accessories: • Machine is already dismantled and stored • Duplex unit • Discharge unit • 13 GB RAM/HDD • Paper cassette (1 x 1,000 sheets) • Starter and drum • MB-511 Manual Banner Feeder • MK-760 Banner Feeder Kit for MB-511 • PF-812 Large Capacity Magazine for Long Formats • FS-532m Staple Finisher with Autom. Staple trimming • MK-761 Banner Output Tray for FS-541/OT-512 • MK-732 Mounting Kit for PI-502 • PI-502 (2 compartment attachment unit) for FS-541/532 • RU-518m cooling/smoothing unit with output function • IC-609 Konica Minolta Embedded Controller C4070/C4080 • UK-220 APPE Kit for IC-609 • IQ-501 Integrated Color Care Unit • Patlite/External light for system status 4-colour • VI-514 interface for IQ-501 • AccurioPro Flux Essentail • Flux Preflight Pro • AccurioPro Flux Multi Seat Year of construction: 2024 A ...

Spindle diameter 3,000 mm Turnerable diameter 3,200 mm Maximum workable height 2,000 mm Weight allowed over spindle 40 ton Pump engine power 63 kW Spindle rotation speed 0.66-62 RPM Machine weight 86,000 kg Dimensions 9.345x5.120x6.030 mm

dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Other MAPPS IVB Grinding length [mm] 150 Specifications: Grinding ø (max.) 350 mm Grinding length (max.) 150 mm Grinding wheels-ø 25-180 mm Swivel range grinding headstock (max.) 230° Grinding spindle: Technology internal grinding spindle Speed range 3-20,000 rpm Power (max.) 11 kW Grinding wheel holder HSK-A63 Drilling spindle: Drilling spindle technology Speed range 1,500-3,500 rpm Power (max.) 7.5 kW Tool holder HSK-A63 Workpiece spindle: Technology Direct Drive Clamping surface ø265 mm Table load (max.) 200 kg Workpiece Clamping Pneumatic Chuck General: Travel in X/Z 965/532 mm Rapid traverse in X/Z 24/20 m/mim Equipment/accessories: Direct displacement measuring system (glass scale) in X/Y Chip Management Magnetic Belt Conveyor Coolant management coolant system with paper belt filter and temperature control Workpiece Measurement P ...

In good condition Koma KTR-1-240-2400 Turbo runner tunnel freezer on Freon. Designed to be highly efficient and for continuous rapid freezing of fresh products like bread, meat, pastries, fruit and more. The quick freezing makes sure that the quality and structure of the food stay in perfect condition. The freezer consists of 8 modules of each 3 meters in length. These modules make it easy to expand or adjust the Koma to the needs of the customer. The Koma tunnel freezer comes with infeed/outfeed, compressor sets, condensers, electric cabinets and a Koma Multicell controller. This freezer is originally used to freeze 1-kilo packages of lasagna. The food is placed on the infeed belt that has a height of 950 mm and then goes into the Koma Turbo Runner. The food gets transported through the Koma on a plastic transport belt with a length of 24 meters and 2,4 meters wide. When the product  ...

Platform diameter 2,800 mm Max turnerable diameter 3,200 mm Maximum height of the workpiece 1,600 mm Weight allowed above platform 16,000 kg Main engine power platform 55 kW Spindle RPM 1.25-63 Spindle No. Crossbar stroke 1,240 mm Horizontal head stroke 1,720 mm Vertical head stroke 1,200 mm Total machine weight 43 ton

cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. This tunnel freezer is currently assembled in our warehouse, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Brand: Koma Type: Multi-Deck KM ...

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

Linear weighing and mixing machine, for mixing four different products - ideal for e.g. seeds, tea, muesli, nuts, pasta, sugar, salt, rice, general granular, granular products. The rotary version has a longer vibration path, which allows the particles to be better separated from each other, thus reducing the risk of jams. SPECIFICATIONS 2-HEAD SCALE: - 4 weighing heads each 0.5 litres, max. 300g/head - Weighing container capacity: 500 ml - Hopper: 8 l - Weight range: 5-300g - Accuracy: +/- 1.5-5g - Max. machine cycle rate at idle: 70 cycles/minute - Electricity: 220V, 1.2kW - Machine dimensions: L1028xW1078xH825mm -Condition: Year of construction 2024, but UNUSED AMTEC PLATF-SML - Frame/platform/rack for 4-head weighing systems - Feet and casters included - Frame dimensions: H 2660 x W 1350 x D 1000 m FOOT SWITCH: To open the weighing head during semi-automati ...

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We a ...

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallets are checked for damage

PQC-U control console with touchscreen, KOMORI KHS-AI system for makeready optimization, automatic wash-up/ink preset, SmartFeedback for density adjustments (with PDC-Lite II), AMR (Automatic Make Ready) for preset job changes, Production quick-start function, Remote register and transfer cylinder adjustment, Automatic setting of sheet format, suction head, side lays, delivery, and stock thickness, S-APC: semi-automatic plate change (no plate bending required), Antistatic blower at feeder head, Side blowers (feeder), 2-zone suction tape feed table, Pneumatic stop fingers, Mechanical & ultrasonic double-sheet detection, Max. sheet size: 640 × 940 mm, Min. sheet size: 297 × 420 mm, Max. print size: 620 × 930 mm, Plate size: 700 × 945 mm (thickness: 0.30 mm), Blanket size: 800 × 955 mm (barred), Substrate thickness: 0.04 – 0.6 mm, Gripper margin: 10 mm, Plate clamp margin: 45 mm, Max ...

King Regius Spiral Kneader Type: SP 125 Spiral kneader extendable with 2 stainless steel boilers digital film control with emergency off for max. 125 kg dough content per kettle Stand-up machine 400 Volt high current connection 2 Speeds Flour dust cover Year of construction 2004

Baguette Long Scooter Kemper FR Kombi - Baguette long scooter from Kemper - Model FR COMBI - Stainless steel clad - with outlet table - can be driven on castors - 400 Volt 50Hz

For sale: Konig spiral kneader GYD 240 system as in Diosna - 3 boilers - after general overhaul - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.