ko used for sale

x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kodak Model: Magnus 400 II Year of Manufacture: 2010 Type of Machine : CTP System Electrical supply: 220 V, 50 Hz, 16 A Pneumatics: 6 Bar Certifications: CE, CSA (C/US) Condition: Used, good condition, Autoloader requires service on plate suction. Machine has been idle but remains connected to power supply. Complete System Included in the Sale Multi-Cassette Unit (MCU) U/G - Fully automatic with interleaved paper feeder, 4 die-cutting heads (Heidelberg) and 3 magazine drawers Magnus 400 II S - 6-sided thermal imagesetter Conveyor for Magnus 400 II - Plate transport unit Plateslider Magnus 400 - Transfer to plate stacker Stacker 860 - Stacker for receiving the imaged printing plate Agfa Azura C 95 Washout Unit - Ground drip tray included. Cleaned, ready for use, plus 4 new rollers. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Description Konica bizhub PRO C1060 Used device Machine number: 1819287410 Meter reading as of 02.11.2022: 00942571 from 12-2015 Controller option VI-507 Interface Kit for EFI Fiery IC-308 / IC-415 Print processing IC-415 EFI Fiery integrated print controller bizhub GPRS modem incl. SIM (KPN) Interface to remote maintenance system via mobile radio, modem incl. SIM card f DF-626 Automatic original feeder Paper input PF-707 Large capacity magazine with suction system technology Finishing FS-532 All-In-One-Finisher RU-509 Cooling/smoothing unit Konica bizhub Pro C1060-tech data

A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available. Rego Herlitzius - Creel machine - on castors - with lubrication - Cutting machine 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer. HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm

This 4-axis EDEL Koordimatic XL 4020 gantry milling machine was manufactured in 2003. It features a substantial working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and has a travel distance of 760 mm in the Z-axis. If you are looking to get high-quality milling capabilities, consider the EDEL Koordimatic XL 4020 machine we have for sale. Contact us for further details.

Dough dividing and rounding machine, King, Mini Rex

This 3-axis KOVOSVIT MAS MCV 750 was manufactured in 2004. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 1000 x 500 mm and a maximum spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 750 vertical machining centre we have for sale. Contact us for further details.

KOMA Proofer/- Proofing Interrupter

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2500 mm workpiece weight max.: 63 t no. of the slides: 2 max. ram stroke: 1600 mm faceplate turning speed range: 0,3 - 32 U/min Anzahl der Drehzahlstufen: 4 total power requirement: 130 kW weight of the machine ca.: 145 t dimensions of the machine ca.: 6,6 x 11,4 x 8,4 m - DRO - 2 swivable Rams (-15° / +40°) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format range: Cutting width max. 1120 mm, min. 80 mm Cutting length max. 1020 mm, min. 100 mm Film width max. 840 mm, min. 30 mm Film length max. 720 mm, min. 50 mm Equipment: 1 lane (preparation for 2 lanes) Suction belt feeder with vacuum, vibrator, cliché glue unit Other: Machine can be viewed by appointment while running.

used sheeter Seewer Rondo Kombi 614, overhauled, Masch.-Nr. 0617 01

General SKU035F151 MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Year of construction1982 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) With jacketcheck General LocationBarneveld With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra information Mixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kW Generic medicinesOintmentsGreen FridayBiotechnologyP ...

KOCH TECHNIC Feeder/Doser/Mixer Set 1 Pallet Type : TM 6D Year: 1995 Dimensions (L x W x H) : 1,20m x 0,90m x 0,50m Weight : 100 kg

Floor-standing unit approx. 100l capacity Stainless steel version with agitator with boiler tilting device with outlet tap double-walled, with thermal oil/electric heater Heating 50 - 200°C

A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible.

capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14

Robot Cobot Universal Robots UR5 complete only approx. 4487 operating hours Year of manufacture: 1/2017 Number of axes: 6 Max. load capacity: 5 kg Max. working range: approx. 850 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

aluminium caps ranging from diameters of 18 [mm] to 38 [mm]

Filling content - 150 ltr. Agitator - 0.75 kW Bubble - 800mm Overall height - approx. 270 cm Filling opening - approx. 35 cm Spout - approx. 20 cm Tap - inch Smoke pipe - approx. 18 cm Fuel - wood / steam

Consisting of: - Rinser 20 nozzles - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

2004 5 Color 720x1030 mm 200 million Komorimatic with Technotrans Beta c PQC IV with PDC-S S-APC powder sprayer Grafix KMS IV with adjustment of diagonal register (cocking) AMR all washing devices KHS On stock Available: immediately Location: Europe

Height=1.33 m, Overall length= 1.28 m, Overall width= 0.8 m, Net weight= 418 kg,

The conical rounder is intended exclusively for rounding dough pieces. Wheat and mixed wheat doughs up to 70/30 in the weight range of 30 – 1,800 grams and output of max. 5,000 pieces/h (depending on weight) can be rounded. Condition: in operation, fully functional Availability: from week 25 (2026) Operating voltage: 400 AC Control voltage: 24 V DC Power: 6 kVA Frequency: 50 Hz

Height=1.28 m, Overall length= 0.7 m, Overall width= 0.76 m, Net weight= 333 kg,

Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough  ...

Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right

Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.

Robot KUKA KR 60L30/2 Robot Complete ZH 3 Year of Make: 2003 Load capacity: 30kg Reach approx.: 2429mm Control: KRC2 KUKA Zentralhand ZH3 installed In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Just Arrived Baler Paal Konti 325 G, built in 2013 Technical data: Manufacturer: Paal Type Konti 325 G Year of construction 2013 Hours: 12110 Press force 100 t Drive power 2 x 55 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Setting 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, w ...

ABB Robotics IRB 1400 complete robot Control: S4C-M98 Max. working radius: approx. 1450 mm Load capacity: 5 kg Year of Make: 1998 Scope of delivery: robot, controller, cable, teach panel, operating instructions, circuit diagrams, In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Size: 310 x 430 mm Equipments: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Pastry Filling Machine, 1 Piston Machine

Sprinkling Seed Station Humidification Sowing BunsBest suited for Kövy Bun Plants

Cooking piece, cream cooker Floor-standing unit approx. 100 capacity Stainless steel version with agitator with boiler tilting device double-walled, with thermal oil/electric heater Heating 85°C

Belt width: 600 mm, Power: 3 x 380V, 50Hz, 5.7kW, Dimensions: 3300 x 1000 x 1700 mm, Weight: 750 kg

This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details.

Key data: 315 KW, 990 1/min

Machine Type: Electric Motor Manufacturer: EMK Type: KOI2G355L3-6B3E3KU-Z1 Year of manufacture: unused Condition: new Offer will only be sent if a complete imprint is provided! Price 12.950 incl. 19% VAT / per piece Fixed Price Location Warstein , Germany Reference number M-EMK-0526-1 M-EMK-0526-2 DESCRIPTION We offer you an unused electric motor from the manufacturer EMK. 400V 990 RPM S1 / Continuous operation IP55 Efficiency IE3 Weight 2490kg 2 x in stock Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line König Classic Rex Combiline 800 This system is currently still being repaired (pictures are from the bakery) Suitable for the production of round, oval and die-cut rolls as well as other stamped rolls Year of Make: 2008 Dough divider and rounder, type: Classic Rex T6 Proofer, Type: Combiline 800 Weight range: 45-100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proofer Proofer with air conditioning (temperature, humidity) side discharge belt for further production (e.g.: downstream

Bread Roll Line Combi WP Multimatic MUS Selecta Modular V60 Combi Year of Make: 2016 Condition: repaired, ready for immediate use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS 5-row 3/4/5-row, combined roll line for the production of shaped rolls and long rolls, sliced and uncut Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6000 pieces Fermentation time: 12 min Stamp unit for emperors, braids, pressed rolls, etc. Green operation without proofer with direct deduction possible (e.g. for Berliners) Performance

Bread roll line König Mini Rex G2000 Year of Make: 2004 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex Futura, swing-out, up to max. 4,000 pieces/h Stamps for round and square rolls Stamp size: SKG63 and RK64 Weight range: 40-105 g Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Dough divider and rounder König Industrie Rex I 6 Condition: cleaned and tested Incl. dough funnel with lubrication, laterally movable with ladder Weight range: 30-100 g Max. hourly output: 18,000 pieces Siemens touch control with program memory Incl. 1 chamber drum Incl. 1 set for 4-row production, 1 set for 6-row production

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

König Artisan SFC bread roll line Year of manufacture: 2018 Condition: cleaned & tested Suitable for making ciabatta and square buns Hourly output: max. 300 kg dough Dough sheet height: min./ max. 12mm/ 32mm, dough dependent Dough belt width: 170 mm Dough Tape Flour for Top and Bottom Guillotine and punch for high product variety Touch panel with recipe management Poppy seed with water bath, type: MOC-C300 Incl. 3 cutting rollers for 1 to 4 rows of operation Incl. 1 punching tool of your choice, subject to availability

Bread roll line König Mini Rex G2000 Year of Make: 2005 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Dough Divider and Rounder King Mini Rex Multi Year of Make: 2012 Condition: cleaned & checked, maintenance carried out Roller hopper up to approx. 15 kg dough capacity Removable components for easier cleaning Simple control via microcontroller via touch panel Different weight ranges due to easy and safe replacement of the weighing drum bars Single to four-row operation Maximum hourly output of 1200 ? 4800 pieces per hour Extremely wide weight range: 8 ? 330 g (different stamp sizes required) Incl. stamp size SK58, weight range: 30-80g,