ko used for sale

faceplate diameter: 4000 mm swing diameter: 4200 mm turning height: 2000 mm workpiece weight: 50000 kg cross travel of ram-slide: 2300 mm slides vertical travel: 1250 mm swival range +/-: -15/+30 Grad faceplate turning speed range: 0,5 - 55 U/min Control: Fagor 8055i CNC total power requirement: 182 kW weight of the machine ca.: 134 t dimensions of the machine ca.: 5920 x 10200 x 8400 mm Machine overhauled in 2008 - CNC Control FAGOR 8055i - Tool C8 - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm swivelling range: 90 Grad table height: 450 mm number of T-slots: 8 Stck. groove width: mm weight of the machine ca.: 140 Kg dimensions: 0,9 x 0,8 x 0,6 m Dividing table with: - Rotary and swivel axis - Axes are moved via handwheel - Both axes can be clamped The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine -Projection: 645 mm -Taper mount: MK3 -Speeds: 95 - 1050 rpm -Columns: Ø 190 mm -Spindle stroke: 195 mm -automatic feed: 0.05/0.10/0.20 mm/rev -Clamping table: 735 x 520 mm -Dimensions: 1350/705/H2170 mm -Weight: 1100 kg

High-speed camera, -Handover: in its current condition as inspected -Part: unchecked from stock -Manufacturer: Kodak, EKTAPRO HS Motion Analyzer Model 4540 -Voltage: 200-240 V -Individual components: see photos for technical data -Transport container: incl. -Transport dimensions: 1200/800/H570 mm Total weight: 84 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gearbox Kollmann type: ZS4-B3 -Manufacturer Motor Garbe Type: 90L8/4 -Speed: 25/50 rpm -Power: 0.55/0.75 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 33 -Dimensions: 530/250/H270 mm -Weight: 48 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: approx. Ø 90 mm -Piston rod: Ø 60 mm -Pipe outer diameter: 120 mm -Stroke: 940 mm -Total length when retracted: 1510 mm -Piston tube mounting: Ø 25 mm -Piston rod mounting: Ø 35 mm -Ideal for building a hydraulic press -Quantity: 1 piece available -Weight: 80 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Stamp: for Herrenknecht tunneling -Piston diameter: approx. 140 mm -Piston rod: Ø 115 mm -Stroke: 310 mm -Max. Stamp pressure: 500 bar -universal: applicable -Number: 3x cylinders available -Price: per piece -Dimensions: 168/200/H550 mm -Weight: 82 kg/piece

Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 -Brake: 8 Nm -fan motor -Dimensions: 610/195/H183 mm -Weight: 26 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Gossen, control plug-in cards circuit boards -Switching regulator card: Constant S83 S5 EU 12 -Plug-in card: 7204-6072C0 -Temperature controller card: Gossen Pantatherm DS 4 4400-S 8 pieces -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 5.2 kg

Electric chain hoist, crane, hall crane, assembly crane, hand trolley, rolling trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley -Manufacturer: Konecranes, electric chain hoist with chassis -Chain hoist: Type XN16 2004 B2 load capacity 1250 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Chain length: 4.65 m -Crane chassis: beam width max. 255 mm -Dimensions: see photo technical. drawing -Transport dimensions: 1200/800/H440 mm -Weight: 173 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Konecranes, crane chassis -Beam width: up to 242 mm -Load capacity: 2000 kg -Dimensions: see technical drawing in the photos -Dimensions: 335/300/H255mm -Weight: 19 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KOSMA, gate valve, shut-off valve without drive -Connection: DN50 PN16 -Quantity: 2x valve available -Price per piece -Dimension: 230/165/H220 mm -Weight: 9.9 kg/pc.

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, primary switching regulator -Manufacturer:Konzept, 24V DC primary switching regulator Competent NSP 2410-1 -Input voltage: 230 VAC -Quantity: 1x module available -Dimensions: 205/110/H90 mm -Weight: 1.0 kg

gauge block box, gauge blocks, gauge block holder, parallel support, parallel support pair, plane-parallel measuring leg -Manufacturer: Koba, parallel gauge block set -Gauge block holder: 0-200 -Gauge block set: not complete, see photos for contents -Dimensions case: 545/210/H45 mm -Weight: 5.0 kg

Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

Plug-in shaft for hollow shaft, friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, drive shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: 4700419300 suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 160 x 600 mm -Groove width: 40 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 735 mm -Weight: 173 kg/piece

Plug-in shaft for friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 280 mm -Weight: 83 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Number: 5x mounting flange available -Price: per piece -Dimensions total Ø 180 x 100 mm Weight: 7.1 kg/piece

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Handover/Price: in current condition as viewed -Gearbox housing: Damage see photos -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Konecranes, electric chain hoist with powered trolley -Chain hoist: Type XN10 1604 b1 load capacity 1600 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5.4 m -Crane chassis: TDV 1600 20/5 m/min -Carrier width: max. 310 mm -Dimensions: see photo technical drawing -Transport dimensions: 1200/700/H550 mm -Weight: 110 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 78 x 230 mm -Weight: 2.7 kg

Digging bucket, excavator bucket, demolition bucket -Design: stable -Contents: 175 l -Width: 500 mm -Height: 550 mm -Depth: 1000 mm -Quick-change mount -Carrier device: Hekomat SKL08 -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 210 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Stamp: for Herrenknecht tunnel boring -Piston diameter: approx. 150 mm -Piston rod: Ø 110 mm -Stroke: 700 mm -Usable: universal -Number: 2 cylinders available -Price: per piece -Dimensions: 950 x 300 mm -Weight: 150 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 65 mm -Piston rod: Ø 45 mm -Stroke: 600 mm -Piston rod mounting: M30 x 1.5 mm - universally applicable: can be used -Quantity: 1 cylinder available Price: per piece -Dimensions: 110/1430 mm -Weight: 30 kg/piece

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Main features, - Rugged industrial meat grinder, - Designed for high production performance, - Large filling basin with safety cover, - Powerful worm drive, - Including worm, cutting insert, and hole discs, - Established German quality, ---------------------------------------------------------------, ⚙ Technical data, - Type: AWE 130, - Power: approx. 11 kW, - Connection: 400 V / 3 Ph / 50 Hz, - Hole disc diameter: 130 mm, - Current consumption: approx. 21,5 A, - Power: up to about 1,500 – 3,000 kg/h (depends on the product), ---------------------------------------------------------------, Areas of application, Ideal for:, - Meat processing plants, - Butcher shops, - Convenience production, Suitable for fresh as well as lightly frozen meat., Dimensions / weight: L x B x H: 1,200 x 1,000 x 1,450 mm

Rico 2 Head Packer for 2 x 6 Wine Box 2 x 6 Box

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

Baler Paal Konti 325 D/SO, built in 1999 Technical data: Manufacturer: Paal Type Paal Konti 325 D/SO Built in 1999 Hours: 50702 Press force 94 t Drive power: 2 x 45 kW Total connection 104 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex wor ...

Komorimatic with Technotrans Beta c ,PQC IV with PDC-S, S-APC,powder sprayer Grafix, KMS IV with adjustment of diagonal register (cocking),AMR , all washing devices,KHS approx 200 mil impressions

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 95 mm -Clamping height: 85 mm -Number: 4x tensioners available -Price: per piece -Dimensions: 180/35/H70 mm -Weight: 1.0 kg/piece

16 stations Hand feeding station Missed feed control Criss-cross delivery Max. format: 310 x 460 mm Min. Format: 100 x 105 mm Video available upon request

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 200 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 350 kg,

Koppens Former Model: VM400HSE 400mm belt width Screw Fed system New Mitsubishi touch screen Excellent overall condition With one mould set included

A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible.

New screening drum for Komptech Maxx. Perforation 25 x 25 mm offset square. Sheet thickness 8 mm. IMMEDIATELY AVAILABLE.

Description Single-colour offset printing machine Heidelberg Kord 64 Grey model from 1970 SN 357352 Standard equipment Size 46 × 64 cm Maximum size: 460 × 640 mm Minimum size: 140 × 180 mm

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

Description Electric double wash cloth unwinding suitable for KBA Rapida RA 106 Koenig & Bauer