134,068 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Doleschal Type: Smoking chamber Model: dvoja kolica Productivity: 260 kg/h Height: 3000 mm Width: 1910 mm Length: 2290 mm Voltage: 400V 50Hz 3N Power: 48 kW Main material: Stainlees Steel
Catalog No. : 7654 Type: MT 50 Producer: KOVOSVIT Made in: 2001 Characteristic: Control system: Siemens Sinumerik 810 D Maximum-turning length: 1500 mm Turning diameter over bed (max): 500 mm Workpiece weight: 350 kg Total power demand: 30 kVA Weight: 2500 kg Equipment: Chip conveyor Tailstock Knife head
1m x 1m 24 floors 2m high 36 stainless steel gratings with perforated plate 480 x 995 mm
New, unused automatic baler Manufacturer: PAAL Type: KONTI X 700 J Including automatic 4-fold cross binding Hours: 0 Year of construction 2026 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW (axial piston pumps) Throughput capacity (according to manufacturer's specifications): approx. 675 m³/h Capacity at 35 kg/m³: 23.6 t/h Capacity at 60 kg/m³: 38.7 t/h Capacity at 100 kg/m³: 57.5 t/h Binding: 5-fold vertical + 4-fold horizontal Machine weight: up to approx. 59 t including new press feed belt Manufacturer: PAAL Year of construction 2026 Type KEF 1900 incl. gooseneck Conveyor width: 1,900 mm Feed length: approx. 6,250 mm Subject to errors in the technical data.
Used automatic labeling machine from KOSME model TOP STAR 960 20T S2 E4. New 2003. For paper labels (main and counter) cold glue. The labeling machine is equipped with two stations with label magazines. Each station has five label transfer pads. The carousel is equipped with 20 plates. General overhaul carried out in 2018.
automatic baler Manufacturer: PAAL Type: KONTI 125 D / SO Year of Make: 2002 Technical data: Press force: 60 t at 300 bar Specific pressing force: 7.79 kg/cm² Channel format: 700 x 1,100 mm Bale weight: 425 - 580 kg, depending on material and bale length Filling opening: 1,400 x 1,020 mm Machine weight: approx. 20 t Drive power: 30 kW Throughput: 150 m³/h Pressing capacity: approx. 5.00 t/h at department store (35 kg/m³ bulk density) approx. 8.75 t/h for mixed paper (60 kg/m³ bulk density) approx. 12.5 t/h for collected goods (100 kg/m³ bulk density) Wirbulator, which can be swivelled in by hand, has been retrofitted. Optionally with: Press feed belt Manufacturer: PAAL Type KEM 1400 Year of Make: 2002 Technical data: Conveyor width: approx. 1,400 mm Wheelbase: approx. 14,250 mm Feed length: approx. ...
Make: KOMFOVENT Type: KLASIK-RECU-9-IS3-C-18.5/15.0-F7/M5-X-X-CW Year of Make: 2014 Capacity: 25,300 m³/h Current consumption: 63.8 A very good condition, as good as new facility Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...
A Köhler universal cutting table for the food industry is available. Machine dimensions X/Y/Z: approx. 900mm/900mm/1200mm. An on-site inspection is possible.
Inv. Num. : 7721 Type: COMPACT Producer: VANAD Created: 2015 Parameters: Operating hours: 5000 h Work table length: 4000 mm Work table width: 1500 mm Machine weight: 6000 kg Equipment: Eagle Compressor
2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...
x-travel: 600 mm y-travel: 250 mm z-travel: 350 mm total power requirement: 5,5 kW Universal Production and Toolroom Milling Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Koening KTW 653 Printing Plate Developing Machine; Condition as good as new; 3 brushes; Inlet width 650mm; suitable for waterless plates; optionally with pressure plate stacker. Plate processor Koenings KTW 653; condition like new; 3 brushes; working width 650mm; used for waterless plates; for option with plate stacker.
: 920229 grinding band dimension: 75 mm x 2000 mm wheel dimensions: 250 mm weight: 90 kg volt: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: vice: x-travel: 700 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal rotary table / dividing head Hahn & Kolb with three-jaw chuck Ø 250 mm. Areas of application & details: Horizontal rotary table from Hahn & Kolb for precise rotary and partial machining, suitable for milling machines, machine tools and fixture construction. Stable industrial design made of grey cast iron, precise indexing via worm gear, equipped with a large 3-jaw lathe chuck Ø 250 mm for solid round parts, shafts, pipes and flanges. Ideal for bolt circles, grooves, gears, shaft machining, CNC preparation, training toolmakers. Compatible with almost all milling machines with T-slot table, e.g. Deckel FP1/FP2/FP3, Maho MH400/600/700, Hermle UWF series, Schaublin 13/22, TOS FNK/FNGJ, Kunzmann WF series, Avia FND/FNC. As well as comparable tool milling machines, radial drilling machines and column drilling machines. Reliable clamping technology for round parts, professi ...
Bread roll system composed of: 4-row Fortuna head machine type Primus 4 Weight range 40-110gr, TOUCH control Stainless steel Kövy proofing room type KA-S with cutting and punching station with disinfection with deduction with humidification station - Bakery condition
working width: 6 m Number of gangs: 4 0 Number of folders: 1 0 Number of rollers: 1 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 6 m Number of gangs: 5 0 Number of folders: 2 0 Number of rollers: 2 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Robot Cobot Universal Robots UR10 complete Built 03/2014 Tube dented on the upper arm, but robot works without any problems. Number of axes: 6 Max. load capacity: 10 kg Max. working range: approx. 1300 mm Serial Number: 20144206776 Scope of Delivery : Robot, Control, Cable, Teach Panel Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works. The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT. Pick-up on site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary due to the number of pieces, weight and desired delivery conditions. Shipping ...
Belt width: 1000 mm, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 2650 x 1800 x 2400 mm, Weight: 995 kg
Infeed Belt, Integrated Pre-Stacker, Integrated Control Panel, Security Guards, Delivery Belt, Max Untrimmed Size: 12.20" x 15.74" x 3.14", Max Trimmed Size: 11.80" x 15.27" x 3.14", Min Trimmed Size: 3.90" x 4.72" x 0.78", Max Thickness: 3.15", Max. Stacking Height: 3.14", Front Cutt-Off Width: 1.57", Head And Tail Cutt Off Width: 1.96", Capacity: 6.600 Cycles/Hour
Control Heidenhain ... Manual Plus 4110 Turning diameter ... 500mm Turning length ... 1500mm Spindle bore... 82mm Spindle speed ... 0-3000 rpm. Machine weight ... 2500kg L x W x H ... 3092 x 1370 x 1785mm Main engine power ... 17kW Max. workpiece weight ... 1000kg Circumferential diameter via support ... 350mm The machine is in good condition, possible to test under power.
Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks
Used Used Kosme blower: Year: 2017 Condition: As Is Model: KSB6R Year: 2017 Speed: 12.000 BPH Rotative with 6 cavities Molds not included Air recovery system Neck finish: PCO 1881 Maximum container size: 3 liters Equipped with hopper, elevator, and orientator Safety protections Code: W 115 More details: https://bottlingscout.com
Offset printing machine Heidelberg KORD, 1-color, machine number 334478, 46 x 64 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
bizhub PRESS C1060 = Equipment No: 1817933817 – Digital Printing Machine Incl. DF-626 Original Feeder, PF-707 Paper Cassettes, SD-506 Finisher, PB-503 Perfect Binder, IC-308 ext. EFI Controller incl. VI-507 Interface kit, RU-509 Connection Unit
Used Used Kosme PET Blower: Year: 2012 Condition: As Is Model: KSB 4R Year: 2012 Speed: 8,000 BPH Type: rotary Number of cavities: 4 Neck finish: PCO 1881 Included molds for 0.5 L and 2 L formats Chiller included Preform tipper, elevator and orienter included Safety protection Code: W 121 More details: https://bottlingscout.com
automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)
x-travel: 2000 mm y-travel: 800 mm z-travel: 800 mm Control: Haidenhain 426 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bizhub C3350 = Equipment No: 1818829867 – Color MFP Incl. PF-P13 second paper cassette, FK-512 fax module
Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EP Year 1972 - Serial-No. 275 Size max: 405 mm Accessories: 2-corner-pulling-heads Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Eckenrundstossmaschine - Corner Rounding Machine Kolbus EH Serial-No. 294203 Rundes Messer Nr. 11 / Round Knife No. 11 Stapelhöhe max. 55mm Hub 65mm Handhebel / Table model Manual Operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Used Used Kosme PET Blow Moulding Machine: Year: 2005 Condition: As Is Model: KSB4L Year: 2005 Speed: 6,000 BPH 1L format Type: linear 4 cavities Preform elevator and orientator Bottle neck 29/21 Safety protection Code: W 124 More details: https://bottlingscout.com
Used Used filling monoblock Kosme 36.8: Year: 2006 Condition: As Is Used filling monoblock kosme 36-8 Clockwise direction Speed: 8.000 bph Year: 2006 36 gravity valves Pneumatic system to lift bottles Corking machine with 8 heads Safety protections ce New electric panel 2021 Machine reconditioned in 2021 Code: Q 11 More details: https://bottlingscout.com
Used Used Kosme Labeller 8T CE CO 5S Adhesive 5.000 bph: Year: 2007 Condition: Reconditioned Year: 2007 Speed: 6.000 bph Direction: Counterclockwise 8 heads Electronic cams Optical centering 5 Adhesive Stations: - 3 Adhesive Stations Kosme - 2 Adhesive Stations Makro Various formats available included Safety protections Code: EA 657 More details: https://bottlingscout.com
Used Used labeller Kosme Extra Ad 504/6 Ce: Year: 2009 Condition: As Is LABELLER KOSME 6T Year: 2009 Speed: 4.500 bph Direction: Counterclockwise Model: EXTRA AD 504/6 CE 6 heads Nr.2 Adhesive stations PLC Siemens S7 Safety protections Code: EA 616 More details: https://bottlingscout.com
Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-System Year 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Used Used labeller Kosme 6t 3s adhesive: Year: 2000 Condition: As Is Used labeller KOSME 6T 3S | Adhesive Year: 2000 Speed: 6.000 bph Direction: Clockwise 6 heads 3 adhesive station 1 cold glue station for ?L? seal Safety protections. Code: EA 416 More details: https://bottlingscout.com
Used Used labeller Kosme Star 720: Year: 2002 Condition: As Is Used labeller KOSME Year: 2002 Speed: 6.000/7.000 Bph Model: STAR 720 Direction: Counterclockwise Number of heads: 12 Number of heads: 3 Adhesive label Lateral notch centering Labels: Front Back Collar/stamp Bottles formats: 64mm/76mm/78mm/81mm/83mm/90mm/92mm Safety Protections Code: EA 547 More details: https://bottlingscout.com
Used Used labeller Kosme Extra Adhesive 5.000 bph: Year: 2002 Condition: As Is Used labeller KOSME | 6T CE S2 E2 Year: 2002. Speed: 5.000 bph Direction: Clockwise. 6 heads. 2 adhesive stations. Electronic cams. Safety protections. Code: EA 332 More details: https://bottlingscout.com
1 Color Sheet-Fed Offset Printing Machine Heidelberg KORD64 Year 1970 - Serial-No. 337842 Size max. 460 x 640mm Speed max. 8.000sh/h Dampening System conventionel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Used Used labeller Kosme 6.000 bph: Year: 1994 Condition: As Is Used labeller KOSME 12T Year: 1994. Speed: 6.000 bph. Direction: Clockwise. 12 heads. 4 cold glue stations. Suitable to apply lables: collar, front, back, marks and doc/docg. Plate handling: brake-clutch motor. Optical centering. Manual: available. Measurements: 3.0 meters long, 3.0 meters wide. Safety protections. Code: EA 222 More details: https://bottlingscout.com
Used Used labeller Kosme adhesive line: Year: 1996 Condition: As Is Used labeller KOSME Model: Super velox 6 teste Year: 1996 Speed: 4000 bph Direction: Clockwise 6 heads 3 adhesive stations Apply labels: Front ? Back ? Stamp. Safety protections. Code: EA 233 More details: https://bottlingscout.com
Used Used Kosme labeller: Year: 2001 Condition: As Is Model: Extra Adhesive 6TS2E2 Year: 2001 Speed: 5000 bph Direction: rotative clockwise Head adjustment: Manual 6 head Mechanical cam system 2 adhesive station Fixed group Thermal transfer printer Type of label: - front - back Safety protection Code: EA 679 More details: https://bottlingscout.com
maximum number of results exceeded
please refine your search
