knittin machine used for sale

A total of four custom-built Wheelabrator turnover molding machines and one small prototype are available. Max. compressed air: 8bar. These are custom-built systems with the corresponding prototype. The maximum product size that can be produced on the four main machines is shown in the image. An on-site inspection is possible.

Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 85 mm cross-section heigth:: 25 - 40 mm feed:: 1 - 999,999,9 mm speed of feed:: 60 m/min cuts max.:: 100 - 120 Schnitte/m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.:  ...

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 100 x 35 mm -Clamping depth: 65 mm -Dimensions: 250/160/H70 mm -Weight: 4.3 kg

: 0 bore depth: 10000 mm number of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mm swing diameter over bed slide: 1600 mm boring diameter: 50 - 310 mm centre height: 800 mm speeds:: 2,5 - 400 total power requirement: 74 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 40 mm -Clamping depth: 95 mm -Dimensions: 350/210/H80 mm -Weight: 7.7 kg

CNC Punching Machine manufactured in 2007. This BOSCHERT Compact 1000 features a working range of 1,000 × 2,000 mm and a maximum punching force of 280 kN. It is capable of handling workpieces up to 150 kg and can punch holes with a diameter of 105 mm. If you are looking to get high-quality sheet metal punching capabilities, consider the BOSCHERT Compact 1000 machine we have for sale. Contact us for further details.

Key data: 140 mm, 220 mm

CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg

bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Vision Wide Vision gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,530 mm, and Z-axis travel of 750 mm. The spacious work table size of 2,000 × 1,530 mm makes it ideal for large, flat workpieces. If you are looking to get high-quality milling capabilities, consider the Vision Wide Vision gantry milling machine we have for sale. Contact us for further details.

Brazing line manufactured in 2018. This SCAME BRAZING LINE 50-20-350-GI-DR features a maximum temperature of 1150 °C and operates with an electric power source of 85 kW. The continuous longitudinal conveyor system efficiently moves parts along a passage chamber measuring 50 x 20 x 350 cm. If you are looking to get high-quality brazing capabilities, consider the SCAME BRAZING LINE 50-20-350-GI-DR machine we have for sale. Contact us for further details.

Optical measurement machine manufactured in 2023. This VISCOM S3016 features a maximum PCB dimension capacity of up to 430 mm x 610 mm and includes an uninterruptible power supply. It is equipped with 4 orthogonal cameras and offers high-resolution inspection capabilities. If you are looking to get high-quality inspection capabilities, consider the VISCOM S3016 optical measurement machine we have for sale. Contact us for further details.

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,450 t dimensions of the machine ca.: 3830 x 1160 x 1180 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 24mm total power requirement: 45+22 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis WOTAN Rapid 1 boring machine was manufactured in 1995 and retrofitted in 2017. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The 360° rotary table allows for multi-sided machining, enhancing efficiency. If you are looking to get high-quality boring capabilities, consider the WOTAN Rapid 1 machine we have for sale. Contact us for further details.

201122,146 h180 kN400 V / 50 Hz18 kVA24 V DC3 x 25 A7 - 14 bar05/2026Tool cassettes, various punches and dies, MultiTool, Easy Type

20126,000 mm

A universal tool milling machine by Friedrich Deckel, overhauled in 2008 and originally built in 1989, is available. Travels X/Y/Z: 560mm/500mm/450mm, table dimensions X/Y: 900mm/530mm, max. table load: 450kg, tool taper: SK40, quill stroke: 80mm, milling head swivel: +/-90°, spindle speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 35mm total power requirement: 45+22 kW weight of the machine ca.: 35 t dimensions of the machine ca.: 5684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 40mm total power requirement: 2x37+30 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6085 x 2630 x 2787mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 50mm total power requirement: 45+45 kW weight of the machine ca.: 72 t dimensions of the machine ca.: 6370 x 3240 x 3660mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 10mm total power requirement: 15 kW weight of the machine ca.: 10,6 t dimensions of the machine ca.: 5310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Fanuc CNC wire EDM machine is available. Travel X/Y: 350mm/500mm, max. workpiece dimensions X/Y/Z: 450mm/650mm/300mm, max. workpiece weight: 500kg, machine dimensions X/Y/Z: approx. 2600mm/2550mm/2200mm, weight: approx. 2300kg, operating system: Fanuc Series 16-WA. Documentation available. An on-site inspection is possible.

Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.

A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 30 kW weight of the machine ca.: 15,15 t dimensions of the machine ca.: 5010 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1160 x 1000 x 1175mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13 total power requirement: 15 kW weight of the machine ca.: 8,84 t dimensions of the machine ca.: 4760 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HEBÖ SSB-3 scroll bending machine was manufactured in 2015 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ SSB-3 is a professional bending machine for the production of decorative elements used in artistic blacksmithing. The machine is designed to bend steel rods and flat bars, enabling the creation of spirals, arches and other decorative elements. Machining is performed by means of interchangeable work heads, which gradually shape the material, ensuring high accuracy and repeatability of the finished parts. Continuous speed adjustment within the range of 1 to 50 rpm enables precise adjustment of operating parameters to the type of workpiece being machined. The machine also features a large work table, an integrated tool cabinet  ...

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 4mm total power requirement: 5,5 kW weight of the machine ca.: 2920 t dimensions of the machine ca.: 3600 x 970 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm (s) total power requirement: 30 kW weight of the machine ca.: 13950kg t dimensions of the machine ca.: 4510 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 18,5 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 4760 x 1660 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HEBÖ STM-5VDZ wrought iron machine was manufactured in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which a single workpieces were produced. The HEBÖ STM-5VDZ is an excellent choice for artistic blacksmithing workshops. It enables the efficient production of decorative elements, which are used, amongst others, in fences, balustrades and metal furniture. The standard HEBÖ STM5 unit is designed for twisting bars with a cross-section of 35×35 mm and a maximum length of 1250 mm. The continuous speed adjustment enables the machine’s operation to be precisely adjusted to the type of part being produced, whilst the 8 kW drive ensures stable operation even during the most intensive use. Thanks to additional attachments, it is possible to perform many different operations a ...

GEKA BENDICROP 50 ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.L.U. The machine, designed for the comprehensive machining of steel parts, enables a wide range of operations to be performed in one place. This solution significantly improves the production process and reduces the need for additional machines. The GEKA BENDICROP 50 is equipped with 5 work stations for punching holes, bending flat bars, and shearing flat bars, angle bars and steel bars. Each station features high-quality, quick-change tools, which allow the machine to be adapted to current production requirements. The design, based on a rigid, durable frame, ensures high operational stability even during intensive use. As a result, the GEKA BENDICROP ironworker machine is an excellent choice for production plants and locksmith workshops. The total weight of the machine is approximately 1000 kg. Te ...

FLADDER 200/GYRO-1000 VAC deburring machine was built in 2018 in Denmark by Fladder Danmark A/S. The machine, designed for the precise removal of burrs, edge rounding and surface finishing of metal parts, is an excellent solution for both small and large production plants. The combination of proven solutions with reliable components ensures high machining repeatability over the entire service life. The finishing process is performed fully automatically by conical 6 spindles, arranged in pairs on a gear head. The spindles simultaneously rotate around their own axes and perform an orbital movement, enabling machining in all directions. This design guarantees a uniform surface finish regardless of how the workpiece is positioned on the conveyor belt. Each spindle is additionally equipped with the Lock-it system, which facilitates the fitting and balancing of the abrasive brushes. The  ...

This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 30 kW weight of the machine ca.: 18,3 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 37+22 kW weight of the machine ca.: 39 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.