knittin machine used for sale

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.

Double door pharma grade washer incl. conrol panel Siemens, type Simatic 087. Washer is CE-marked.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Lenght: 130 Height: 210 Delivery time: 20 working days after advanced payment

Refurbished machine 3000 x 1500mm Laser: 5000w

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand

Spiral mixer Sind, 70 liters, NEW Dimensions: 1050x550x1150mm Electrical power: 1.5/2.5kW

Spiral mixer Sind, 170 liters, NEW Dimensions: 1230x720x1480mm Electrical power: 3.5/5.5kW

For sale: Neri ETA 300 EC01 Labeler

Debarking machine with round wood task. blockzug - komplet

Rewinder MAYA BXA 434 Plus Built in 2014

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 4000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Debarking machine Bar Gar Bg 90 min 140/ max 900mm motor 22 kw with cententic table block pull with ejection

Cazeneuve HB500 rebuilt lathe. Distance between centers: 2000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Entrideting machine Bar Gar BG90 min 140/ max 900mm moror 22kw with cententic table block pull with ejection after renovation with warranty

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 750mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Entrideting machine Bar Gar Bg9a min130mm/ max 900mm motor 30 kw Rotor on ball or raderlager, rotor with 5 or 6 Formwork knives, switchboard mi control panel

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

Mechanic plate bending machine Goyar 3C-25/20. Bending lenght: 2000mm. Bending capacity: 25mm. Diameter of upper cylinder: 285mm. Diameter of lower cylinders: 235mm. Main motor power: 20cv. Bending speed: 5 mpm. Weight: 5500Kgs.

Correa F3UE universal milling machine. Table: 1400mmx340mm. Longitudinal travel: 1100mm. Cross travel: 320mm. Vertical travel: 500mm. ISO50. Hure head. Speeds: 18. (28-1400)

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Mode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmType of Measuring system Direct measuring systemDirect measuring system ...

Fixed bed milling machine Zayer 2000BF. Table: 2500x700mm. Longitudinal travel: 2000mm. Cross travel: 1000mm. Vertical travel: 1000mm. ISO50. Speeds: 18. (28-1800rpm). Power: 15cv. Weight: 13000Kgs. Equipped with DRO Fagor.