knife used for sale

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

CATALOG NO. 7223 TECHNICAL DATA - max planing width 770mm - max planing height on both sides 200mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - 2 rows of pressure - pulling shaft, toothed - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft from down: - guide strip - introduction table with a divided sliding shaft - introductory tabletop adjustable up/down - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling, adjustable shafts in the back: - 2 side spindles + clamps 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - electric setting of planing thickness - 4 types of feed speeds 6;9;12.5;18 m/min - 2kW feed motor - diameters of the exhaust pipe: 2x120mm, 2x180mm - dimensions length/width/heigh ...

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Year of construction 1997/1999 Format: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Envelope size: max 642 mm; min 203 mm Capacity: max 12,000 c/h Equipment Gathering machine • 18 stations • Investor 3691 • Diverter 3614 Controls • Double and faulty sheet control • ASAC automatic self-adjusting caliper Intermediate building blocks • Set-up element • 3 vibrating element • coupled with Bookbinding • Milling and roughening station • Hotmelt backing glue • Hotmelt side gluing unit • 2 Premelters • SF Shed Envelope Feeder • SF envelope pressing • Plate chain depositing tape Cooling section • approx. 30 m • inline with Three-knife trimmers • Three-knife trimmer MM Zenith 3672 Stacker • Muller Martini compensating stacker Standards • Standard accessories •Operat ...

CHOJNICKA 120 turning machine - max diameter of processed pins 120 mm - 8 additional sleeves 40, 50, 60, 2x 70, 80, 100, 120 mm - max diameter of input material 150 mm - min length of input material 800 mm - max. machining allowance per side 15 mm - knife head drive motor 15 kW - 4 types of feed speeds + front/back - feed motor 1.5 kW - 3 toothed pulling rollers - 3-knife head - 3 smooth pulling rollers - dimensions of the exhaust port: 160 x 170 mm - dimensions length/width/height 3200x900x1600mm - weight 1750 kg

Machine reamer, 4 pieces PREMUS,® TOOLMENTO 2x PREMUS® 128200 diameter: Ø 14 mm knife length: 20 cantilever length: 175 mm Overall length: 245 mm mounting: MK1 2x TOOLMENTO 65207611 Diameter: Ø 16 mm knife length: 45 mm cantilever length: 270 mm Overall length: 350 mm mounting: MK2 as good as new ! Dimensions ( packaging ): 355 x 48 x 42 mm

Falzmaschine - Folding Machine Stahl K56/4-KTL Baujahr / Year approx 1980 - Serial-No. 16760 Flachstapelanleger / Flat Pile Feeder Falztyp: 4 Taschen - Schwert - Seitentasche - Schwert Folding Type: 4 buckles - 1 knife - 1 side buckle - 1 knife Format / Size: min. 140 x 180mm - max. 560 x 9000mm Papiergrammatur / Paper weight: 40 – 250(g/m²) Stapelhoehe Anleger / Pile height: max. 80cm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Sammelhefter / Saddle Stitcher Mueller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - Year 2007 - Serial-No. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - Year 2007 - Serial-No. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - Year 2007 - Serial-No. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - Year 2007 - Serial-No. MMZ0 1 306 445  – include 4th & 5th knife attachment Kreuzleger / Compensating Counter Stacker Perfetto 0450.0400 - Year 2007 - Serial-No. MMZ0 1 306 445-60 Bandauslage / Band Delivery Mueller Martini 1564.0400 - Year 200 ...

sheet width: 3200 mm plate thickness: 0.5 - 6.0 mm cutting angle: 1° 30 ° no. of strokes: 14 Hub/min back stop - adjustable: max. 1000 mm down holder: 13 Stück work height max.: 800 mm Control: EASY-VIEW oil volume: 270 l voltage: 400 V engine output: 7.5 kW weight: 6100 kg range L-W-H: 4010 x 1610 x 1620 mm from a maintenance workshop - good condition () was only used sporadically according to the previous seller New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH EASY-VIEW touch CNC positioning control Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of ...

Working width: 410 mm; Planer shaft: Tersa knife; Number of knives: 4; dressing table length: 2000 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Display of planer thickness: mech. Counter; Feed speed: 6 / 12 m/min; Feed roller: steel; Pull-out roller: steel; Pressure bar: Yes; Table rollers: no; Motor power: 5 kW; Engine braking: yes, automatic; Suction connection: 120mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 430kg; TERSA planer knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and uniform material feed material feed with two speeds Numerical display for thickness table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Work tables ar ...

General SKU288S389 LocationBarneveld MakeRobot Coupe S.A. (Fr) TypeR 502 No.55/10 1279 Year of construction1996 Main Features MaterialStainless steel Volume4.5 Ltr. Motor0.67 KW Specified Features - Cutter MaterialStainless steel Cuttercheck Capacityca. 4,5 ltr. Diameter225mm Depth125mm Knife diameter215mm Number of knife blades2 Inletdia. 35mm (dia. 225mm) Outletdia. 225mm Motor0,37/0,67 kW 220/380 Volt Information Total height0,5 M Weight20 Kg CEcheck Floorspace0,4x0,3 MCuttersRobot CoupeMills > CuttersBrand > Robot Coupe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Vibrator Reinbold Type: AZR 600 Year of construction: 04/2020 as good as new - only 436 operating hours Hydraulic moving floor Feed opening approx. 600 x 900 mm with top-mounted hopper 1200 x 1000 mm Filling height approx. 1610 mm Hopper capacity approx. 0.6 m³ Working width of the rotor approx. 570 mm Diameter of the rotor 252 mm Power main motor 18.5 kW Rotor speed 93 rpm. 30 Circular Knives Screwed knife carrier 2 counter knives – clearing knife V 8 Screen perforation 20 mm, replaceable Weight 1300 kg

Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.

Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation

Hydraulic guillotine for cutting sheet metal from LVD Belgium type HSL 31/6 3100 mm x 6 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 0.5 - 2 degrees. 9kW motor. Machine weight 4.2 t Bumper departure 750 mm. support for supporting metal sheets at the front of the machine, - ruler 2500 mm long, for cutting at an angle of 90 degrees Original DTR documentation and health and safety instructions in Polish.

Hydraulic guillotine - Gasparini type CO-2504. Cutting length: 2550 mm x 4 mm, Cybelec DNC 10 CNC control. Full CNC change of the knife angle and the inter-knife gap, set by the computer after specifying the thickness. and length of the material. Cutting programs. Cutting sheet metal in the range of 0.4 - 4 mm. Very large loading depth of 520 mm into the machine body (photos), which enables endless cutting of sheet metal from a roll. CNC stop, departure 10 -1050 mm, retraction, programs. A very accurate and precise guillotine. Machine weight 5 tons. 2 supports and a 2000 mm long angle bracket at the front of the machine. Full original Operation and Maintenance Manual in English, BiHP position manual in Polish. A spare set of new cutting knives.

Hydraulic guillotine for cutting sheet metal by ESPE Strojarne Piesok, type CNTA, 3150 mm x 6.3 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 1 -2.5 degrees, set from the desktop. 11 kW motor. Machine weight 7 tons. Bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3150 mm. 2 supports to hold sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Light line enabling line cutting. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine for cutting sheet metal from Darley the Netherlands, type GS 3000-10, 3050 mm x 10 mm (ST40). The machine has a variable knife gap and a constant knife angle of 1.5 degrees. 18 kW engine. Machine weight 9 tons. Electric bumper - bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3050 mm. A machine with very small external dimensions. A support for holding sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.

Hydraulic guillotine - AMADA type GPN 630. Cutting length: 3100 mm x 6 mm, Variable knife angle and knife gap. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

The machine has a quickly changing knife gap with sheet thickness reading and a constant knife angle. 9 kW motor. Weight 4.5 tons. Electric bumpers with reading, bumper departure 850 mm. Supports for supporting sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.

Cutting length: 3100 mm x 6 mm, full CNC control. Variable knife angle and knife gap, set by the computer after entering the gr. and length of the material. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6.5 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...

Automatic line for packaging products in shrink film Kallfass Compact 450. 1. Appointment. The line is designed for packaging products in shrink film. 2. Working principle. Products from the conveyor of the production equipment enter the feeding conveyor of the packaging line. On the infeed conveyor, the product is aligned along the line of motion and then enters the inlet conveyor of the film packaging section. In the packaging section, the products, moving along the introductory conveyor, enter the inside of the half-sleeve of the packaging film, and then move along with the film to the zone of the transverse knife. The cross cutter cuts the film to a predetermined length while sealing it. Further, the product in the film passes to the output conveyor, where the longitudinal knife cuts off the side of the film, also sealing it at the same time. After that, the completely ...

Maszyna do automatycznego pakowania w folie POF, PVC Italdibipack MECPACK STA - rok produkcji : 2006 - max wymiary pakowanego produktu : 500 mm x 400 mm - max wysokość pakowanego produktu : 150 mm - wydajność : 20 zgrzewów na minutę - regulowane temperatury noża wzdłużnego i noża poprzecznego - regulowany czas zgrzewu - fotokomórki pozioma i pionowa - kissing conveyors - dodatkowa funkcja dociągania taśm dla małych przedmiotów - regulacja wysokości zgrzewu gór dół - moc : 2.2 kW - wymiary maszyny : 1700 mm x 800 mm x 1440 mm - waga maszyny : 420 kg - maszyna na 4 kółkach - zapotrzebowanie na powietrze 6Nl przy 6barach - zasilanie 380V Maszyna w pełni sprawna, zadbana, serwisowana, do zobaczenia w produkcji. Tunel BECK w cenie lub prawie nowy tunel + 5000 EURO - silnik górny po remoncie - stan dobry - maszyna na 4 kółkach + wykręcane podp ...

KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: • It is easy to discharge potato peel because it is discharged through designated chute • Peeled potatoes ca ...

Vegetable cutting and washing line consisting of: Product elevator by means of plastic belt with buckets. Dimensions: 2740 x 200mm useful Model: EV-2740X200 Cutting, slicing and dicing machine for vegetables (potatoes in its last application) with continuous working system for uninterrupted production. Three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140 mm) in any dimension. Cuts cubes or smooth or corrugated strips, three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Slices: 1/16 - 3/4 (1.6 - 19.1 mm) Cubing: A combination of the slicing blade, crosscutting blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjustin ...

Folding machine MBO T530-R Cassette fold. machine T530 with a continuous feed mechanism is designed for post-press works, processing of printing products Maximum sheet dimensions: 53.0 x 84 cm Minimum sheet dimensions: 15 x 15 cm Speed: 10 - 200 m/min 4 cassettes + 4 cassettes + 1 knife(X), perforation Configuration: 4; 4X; 44; 44X T530-R Continuous Feed Mechanism 4 cassettes. folder: Т530-1-53/4 4 cassettes. folder: Т530-2-53/4 knife folder: T530-3-X receiving-output device: А56-DC-24 El / equipment: T530-1-53 / 6-R; W09/05 year of issue 2005

Cutting and creasing -Inlet width 70cm - -3 knife shafts at the top + 3 knife shafts at the bottom, -Mechanical height adjustability -Inclined roller table with tapered rollers

Key data: 4 , 220 mm, 150 mm

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm

Offer consists of: Horizon AFC-746 F 6-pocket folding machine - Parallel breaking rollers condition: % - Cross-fold rollers I condition: % - Cross-fold rollers II Condition: % - Rollers overhauled parallel break: - Cross fold rollers on request - Folding machine AFC-746 F Horizon folding machine AFC-746 F: 1st folding unit: 6 pockets 2nd folding unit: knife plus right folding pocket 3rd folding unit: knife - Paper weight: 40-250g/sqm - Pile height pallet feeder: 1.200mm - Format: max. 738x1.100mm with pallet feeder max. 738x1.300mm with round pile feeder min. 210x297mm - largest fold length: 560mm - smallest fold length: 35mm ( 58mm in pocket 1) - output: max. 240m/min, 35.000 cycles/h in cross-fold - dimensions: 4.379x1.870 - Weight: 2.441/2.578kg; pallet/round pile feeder On request we can organise the following for you: Packing,  ...

Key data: 500 mm, 2800 mm, 4 St.

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

Falzmaschine - Folding Machine  Heidelberg Stahlfolder KH-66  Baujahr / Year 2012 - Serial-No. FH.FNH0-00921 Flachstapelanleger / Flat Pile Feeder  Format min. 140 x 180mm - max. 660 x 1040mm  Falztyp / Folding Type: 6 buckles - 1 knife - 1 side buckle - 1 knife  Geschwindigkeit / Speed 50.000 Cycles/hour  Auslage / Delivery SPH-70 - Year 2011  Compressor include - Manuals Included  Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading

Good day! I would like to offer you the following machine: 1 used dresser SCM F 410 - 41 cm planing width - 2.60 m table length - 125 mm knife shaft with 4 knife Centrofix - 4 KW 380 volt motor -Main switch -Circuit breaker - Automatic engine brake - 8 mm chip removal - Joining stop can be swivelled up to 45° - Auxiliary stop - Low-noise design with serrated steel table lips - Suction nozzle 140 mm - Star triangle switch renewed (150,-- € + 19 % VAT) - 4 Leitz-Centrofix knives newly installed (80,-- € + 19 % VAT) - Weight: 750 KG - Price: €4,300,-- + 19% VAT The machine is technically checked, cleaned and adjusted. Cables and plugs available and ready to use. Very good condition. Bank transfer before shipment or cash payment on pick-up. Loading by forklift is not a problem. The machine is sold without any warranty or gu ...

Working width: 407 mm; Planer shaft: strip knife; Number of knives: 3; dressing table length: 1660 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: manually; maximum clearance thickness planer: 225 mm; Height adjustment thickness table: handwheel; Planer thickness indicator: Scala; Feed speed: 7 m/min; Feed roller: steel; Pull-out roller: steel; Pressure bar: continuous; Table rollers: no; Motor power: 3.7 kW; Engine braking: yes, automatic; Suction port: 100mm; Machine length: 1660 mm; Machine width: 870 mm; Weight: 315; Dual unfolding of the table for splitting in seconds Change from dressing to thickness planers, the stop does not have to be removed Planed dressing tables made of grey cast iron guarantee optimum gliding properties of the workpieces Eccentric adjustment on both sides for quick ad ...

Key data: 1530 mm, 4 mm

Schröder MHSU 1500/4,0 - Motorized guillotine shears - Motorized backgauge 750 mm - Hold-down device with hard rubber strip to protect polished sheet metal - Extended extendable support table - All-steel knife 2-flute - Punctures at a distance of 10 mm parallel to the lower knife over the entire course of the table - Selector switch for single and continuous stroke - Rear compartment protection according to CE via 3-beam light barrier and side protective grille -Foot switch - Year of construction 2013 Specification - Effective length: 1530 mm - Capacitance (Rm 400 N/mm²): 4.0 mm - Cutting angle: 2.7° - Stroke rate: 34 rpm - Drive power: 4.0 kW - Nominal power: 5.0 kVA - Power supply: 3x 400 V - Dimensions WxHxD: 2100 x 1410 x 2600 mm - Weight: 1250 kg

Width 82 cm Year of construction 2013 Folding machine for 32 pages production Fully automatic paper folding machine Touch screen computer control fully automated (bags, rollers, swords) Pallet feeder PFH 82 upstream knife shaft 4 fold pockets in the parallel break section downstream knife shaft Window rebate pocket pneumatic 3 Folding Swords in the Cross Break Section (32 pages) Twinstacker TSH 50 with side extension Delivery date: immediately Price on request. We deliver and install worldwide!

Key data: 410 mm, 2850 mm, 4 St.

Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment

Key data: 505 mm, 250 mm, 5 kW

Specifications/Equipment: Planing width approx. 505 mm Planing height max 250 mm Chip removal max. 8 mm Table length 1,110 mm Electr. Thickness table height adjustment with digital display Thicknessing table guided on 4 spindles Feed speed 7/14 m/min One rubberized feed roller each in the inlet and outlet TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm Motor power 5.5 kW Suction nozzle Ø 160 mm Dimensions: 1,200 x 950 x 1,050 mm Weight approx. 600 kg All information is subject to the actual equipment

Inv. Num. : 6876 Type: GSH 500/1000 Producer: Zerma Created: 2013 Parameters: Hopper inlet in mm: 985x590 Dimensions of the rotor: Diameter in mm: 500 Width in mm: 1000 Rotor version F5 5-leg rotors Rotor blades: Number of rotor blade rows: 5 Number of rotor blades: 5x2 Number of stator blades: 3 Rotor speed (50 Hz): Rpm 528 Dimensions in the attached file Drive motor: in kW: 75 Trigger drive in kW: 11 Opening device: hydraulic Weight of the machine: in kg approx. 3500 Electrical data: the machine is still fully functional - connected to the electrical installation Accessories: complete second knife set knife adjuster

plate thickness: 4 mm blade length: 205 mm table-size: 700 x 825 mm cutting capacity stainless steel: 3 mm throat: 300 mm strokes: 50 p. min. oil tank: 35 l total power requirement: 3 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 0,7 x 0,83 x 1,1 m Electric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic asuklink machine, more automatic Cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tipping of the cutting head and abrasion of the knife tips) and bur ...

Fabr.No.: 64000502 // Ser.No.: 00 07 19 736 Formats: Feeder: max. 53,0 x 84 cm / min. 15 x 15 cm Cross break: max. 53,0 x 43 cm / min. 15 x 20 cm Triple break: max. 26,5 x 43 cm / min. 20 x 30 cm Pockets: 6 (+ 1x side pocket after first knife) Knives: 2 Shed delivery with press rollers MBO ASP 66-2 ME (With sheet press and marking device for automatic counting) Equipment / Additional information: Pre and after-mounted creasing & perforating wave (The creasing perforating shaft is between pockets and knife fold)

pressure: - t punching cross-cut in cmm: - stroke: 20 mm plate thickness: 4 mm blade length: 205 mm table-size: 700 x 825 mm cutting capacity stainless steel: 3 mm throat: 300 mm strokes: 50 p. min. oil tank: 35 l total power requirement: 3 kW weight of the machine ca.: 720 t dimensions of the machine ca.: 0,7 x 0,83 x 1,1 m Electric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic punching/nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tip ...

Description: Knife cutter 50 mm diameter for roughing - finishing with positive axial angle and knife at head 2050 mm shank 49 mm working length article reference 133 New item on order From payment it might takes approx 15 days for collection Approx. Onsite Dimension. (l x w x h): 150 x 150 x 10 mm, weight approx.: 2 kg

Weber slicer line consisting of: Weber slicer, type: CCL 902, number: 1466, 400 V, 50 Hz, 10 kW, belt width: 400 mm, Weber line divider, type: CCR, number: 2248, year of construction: 07/2006, Weber knife sharpener, type: MSG 460, number: 266, 380 V, 0.18 kW, dimensions knife sharpener: 650 mm x 450 mm x 700 mm, total dimensions slicer line: 3150 mm x 1200 mm x 2350 mm.

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original stainless steel base Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of construction: 1995 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of construction: 1995 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.