knife used for sale

Working width: 520 mm; Planing shaft: tersa; Number of knives: 4; Dressing table length: 2720 mm; Dressing table adjustment: lever; Hollow and pointed joint adjustment: no; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 870 kg; Large dressing tables made of cast iron The dressing table is adjusted by means of a precise parallelogram system, so that the distance between the table tips and the knife shaft remains the same in every adjustment position The large, stable dressing stop made of anodized aluminum is easily movable and can be tilted from 0Â - 45Â The inclination of the stop can be read from the workstation Standard with auxiliary stop Large four-knife shaft, precision-bearing Smooth running thanks to the precision unit and thanks to t ...

GUILLOTINE REEL SPLITTER 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., AVAILABILITY: STOCK - NEW, Force: 30 T

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 40 mm -Knife thickness: 2 mm -Price: complete -Weight: 0.3 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -12x: left -11x: right -Price: complete -Weight: 0.9 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -10x: left -10x: right -Price: complete -Weight: 0.8 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 2.3 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 0.8 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 39 mm -Knife thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 39 mm -Knife thickness: 2 mm -Radius: 15 mm -Price: complete -Weight: 0.9 kg

Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 60 mm -Knife thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 2.3 kg

Hand lever shears, long-knife sheet metal and round steel shears, lever shears, long-knife sheet metal shears -Manufacturer: Victoria, long-knife tin snips on a mobile stand -Blade insert length: approx. 350 mm -Sheet steel: up to approx. 4 mm -Rectangular profile: up to approx. 7 mm -Total dimensions: 1030/500/H1900 mm -Weight: 109 kg

Hand lever shears, long-knife sheet metal and round steel shears, lever shears, long-knife sheet metal shears -Manufacturer: Victoria, Long Knife Tin Snips -Blade insert length: approx. 350 mm -Sheet steel: up to approx. 4 mm -Rectangular profile: up to approx. 7 mm -Total dimensions: 670/180/H1260 mm -Weight: 55 kg

Thickness planer Made by Klein & Sons Machine No. 32038 Working width 600 mm Planing height max. 200 mm 4 Knife Shaft 2 feed speeds 2 sliding rollers in the table Strip planer knife Motor power 4 kW Suction nozzle diameter 140 mm Knife adjustment gauge included Spare blade included Dimensions 1400 mm x 1450 mm x H 1150 mm Weight with pallet 1062 kg

Technical Specifications: Model: GUR IS MAKINA TY 1050 Bottom and side seal bag making machine Year:2005 Roll Width: 1100 mm Welding Width: 1050 mm Bag Length (Max): 2500 mm Bag Length (Min): 120 mm Cycles Per Minute: 140 U/min Drive:Servo Number Of Lanes: 1 Other Specifications: Material that can be processed: LDPE, HDPE, MDPE; LLDPE and recycled Bottom seal bag making machine Type of bag: Bottom and side weld (open mouth) Sealing bar Fast change of the welding bars, ideal for the production of two kind of bags. Equiped with 2 welding bars (bottom, perlada) Servo Motor Driven Type of delivery: Conveyor table punch 4 folding pleat bottom side Knife central and side System base support for 2 rolls operator panel PLC systems Complete knife belt with knife holder Photocell Antistatic bar Condition: operat ...

Optimal for processing cod, saithe, haddock, and yellowtail, the Baader 444 stands out as the ideal choice for both heading and gutting. Maintaining the collarbone on the trunk, the Baader 444 is particularly well-suited for handling saltfish during the processing. For gutting alone, the heading function can be deactivated. An operator feeds a fish back forward and head to the right into feeding device of a drum and fixed by clamps. Grills device goes down to fish and makes a cut. Shoulder bones do not damage during the cut operation. The drum moves a fish to a knife for trimming a fish belly. Circle knife goes along the shoulder bones and separates it and a membrane from the back bone. After that, during the drum rotation the machine provides cutting of a head. Then a fish move for the gutting operation - crescent knife opens it, and trimming tools removes a viscera from a belly a ...

Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Counter and preset for number of discs with integrated drawer Circular knife made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Cleaning machine with 6 months warranty Many more TOP bread slicers in stock!

Bowl cutter Kilia 50l 3000 RS Express 50 liter stainless steel bowl Operation via push button 2 knife speeds 2 bowl speeds Mixing speed forwards and backwards 6 pcs. knife head 3 pcs. knife head Rated power 15 kW, total rated current 33 A Operating voltage 380 V / 50 Hz Weight approx. 950 kg

Maximum sheet size 660 x 1280 mm, Pallet feeder, 4 buckles first unit, First cross knife (8 pages) Second cross knife ( 16 pages) parallel buckle to the first cross knife. SB-46/MP.D Press delivery. Noise hoods, Pump, Technical documentation, Standard tools. Intergrated counter.

Vacuum cutter VK 125 STL bowl 125 l, knife speed from 300 to 4200 rpm., Ejector hydraulic, without feeding, 6 cutter head, Busch vacuum pump, connected load approx. 40.0 kW Vakuum bowl cutter VK 125 STL,, Bowl volume 125 l, knife speed from 300 till 4200 rpm., unloader, without loading system, knife head with 6 knives, Busch vacuum pump, Power approx. 40.0 kW

Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...

Semi-automatic slicer Bizerba Type: VS 12 A Specifications: 400 Volt / 50 Hz / 1.4 / 0.88 A / 0.350 kW Year of construction: 2007 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife with Teflon coating including original Bizerba knife sharpener Power current / 16A CEE plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Packing machine with bottom foil feeder - 3 servo motors and a printer. Machine Specification: Type: 350X Film width: max. 350mm Package length: 90 - 600 mm Package width: 30 - 160 mm Product height: max. 70mm Foil roll diameter: max. 320mm Packing capacity: 30 - 120 packages/min. Film location: lower film feeder Packing materials: OPP, OPP/CPP, KOP/CPP, ALU-FILM Controls: TOUCH SCREEN touch panel Type of drive: 3 x servo motors Photoelectric sensor: Yes (work with printed foil) Power: 220V, 50/60 Hz, 2.4 KW Machine size: LxWxH - (L)3836 x (W)890 X (H) 1079mm machine weight: 350 kg An advanced high-speed product packaging machine (with bottom foil feeding) is suitable for food products (e.g. chocolates, bread, fingers, sandwiches, vegetables such as celery, dill, greens) and industrial products (e.g. packing masks, sockets / electrical switches, etc.). Packing l ...

Erdwich Crushing Plant Metal, Steel Shredder, Year of construction 2020, Increased working pressure 60 bar, Cutting surface opening 758 x 839 mm, 2 knife shafts, 15 knives, Knife diameter 420 mm, Knife width 50 mm, Shafts Ø 130 mm, Drive power 57 KW, max. operating pressure 335 bar, Oil tank capacity 200 litres,

Key data: 630 mm, 250 mm, 7 kW

Technical details: - Max. table width: 630 mm - Max. table length: 1,050 mm - Max. planing width: 630 mm - Max. planing height: 250 mm - Diameter of suction nozzle: 140 mm - Diameter knife shaft: 120 mm - 4 x strip planer knife, 820 x 35 x 3 mm - Knife shaft speed: 5,000 rpm - Manual star-delta switching - 2 feed speeds, 9 + 18 m/min (manually adjustable) - Thickness table adjustment manually via handwheel and analogue display (scale) Accessories: - 1 x "BARKOMAT" magnetic tool set for adjusting the planer knives Engine data: - Voltage: 380 V - Current: 16.8 A - Frequency: 50 Hz - Power: 7.5 kW (10.0 hp) - Speed: 2,860 rpm - Feed motor power: 0.9/1.3 kW Dimensions (LxWxH): 1,450 x 1,300 x 1,400 mm (incl. extraction nozzle) Transport dimensions (LxWxH): 1,200 x 1,450 x 1,500 mm (on EURO pallet) Weight: a. 950 kg The machine has been completely cleaned, ove ...

Bread slicer, make WABAMA, Model ECONOMY Plus 450, year 2009, Cutting capacity: up to 200 cuts/min, cutting thickness: 4 - 26 mm,, for bread lengths up to max. 450 mm, cross-section: 200 x 150 mm (WxH), Sensor – technology for measuring the panes,, Product holder (multi-tooth gripper), dimensions: 1,130 x 740 x 1,200 mm, use: The machine is versatile and is usually used for the automatic cutting of all soft and hard breads such as: tea and toast breads, multigrain breads, hard-crust double baked breads as well as Christmas stollen and English fruit cake. A fresh bread - cut is usually already possible when warm. Due to the low-noise and vibration-free operation, the machine is ideal for installation in shop fittings., construction/ function: The WABÄMA bread slicer has an extremely stable and resilient construction completely in V2A Nirosta stainless steel. The machine is equipped wit ...

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 220-240 Volt / 50/60 Hz /1 A Year of construction: 2016 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original Bizerba knife sharpener with normal carriage for sausage or cheese Luminous flux / 230V Schuko plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call. 03423-706493

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

Valley. Crank shears with an inclined blade for a sheet of 20x2000 mm, model NLZ427B, are designed for cutting sheet metal with a thickness of up to 20 mm and a tensile strength of S 500 MPa. Scissors can be used in the procurement workshops of metal structures, machine-building enterprises, repair and other plants, when used in climatic zones with a temperate and cold climate version UHL, dry and humid tropical - version O; placement category 4 according to GOST 15150 - 69 The lower value of the air temperature must be at least +5 0С. Designed for cutting metal up to 20mm thick 1. Maximum cutting force, kN 1000 2. The largest dimensions of the metal being cut with temporary 3. resistance

New high-precision knife grinding machine Weinig type Rondamat 960 for sharpening and producing profile knives from a full blank according to a template and re-sharpening of straight planer knives in the knife head with Powerlock Recording and including PowerLock adapter for holding conventional tools. Grinding the planer blades in the planer head with the usual knife projection is possible., admission: HSK Powerlock, Tool width: Max. 240 mm, Tool flight circle: max. 250 mm, Adapter ø: 40 mm

cutting knife for AccuSet - all details can be seen on the picture. The cutting knife is tested and comes from a functional AccuSet. Available on stock

AGFA knife for SelectSet 5000. Including knife holder and dental equipment. Available now

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

• continuous feeder • Counter IZVA 342 T 1st parallel folding unit: • working width max. 67 cm • 4 buckle plates • spiral folding rollers • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife • slitter shaft after cross-fold • spiral folding rollers 2 nd cross fold unit: • cross fold knife left • spiral fold rollers standard accessories: • scoring, perforating and cutting devices for standard Still in operation: No Available: sofort

- planing width 530 mm- planing height min./max. 5-300 mm- max. chip removal 8 mm- min. workpiece length 280 mm- dimension thickness table 1000 x 530 mm- motor 5.0 kW / 400 V- speed 5500 rpm- safety knife shaft Z = 4, FI 120 mm with 4 strip planer knives 530 x 30 x 3 mm- feed speed infinitely variable 6.5 / 13 m/min.- slanted toothed steel feed roller- 2 smooth steel pull-out rollers- thickening table on 4 load spindles- electric height adjustment table pre-programmable with digital display of the planing height wood tray with scratch-free carpet support Suction nozzle 150 mm- Knife adjustment gauge- Dimensions L=1150, W=1120, H=1310 mm- Weight 650 kg

Seydelmann K 90 DC-8, 90 liters bowl cutter, all stainless steel, variable knife speed, 2 bowl speeds, variable mixing speeds forwards and reverse, knife shaft brake electrically operated, noise reduction cover, loading device, unloader, in very good condition. The machine is immediatley available and can be tested in our facility in Koblenz, Germany.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Dimensions (L, W, H): 2, 60m x 1.05 m x 2, 00 m Which parts can be printed: soft drink / glass closure / 400 parts per minute Accessories:-42 roller 100 x 100, different motifs -2 printing units with 1 pressure tool (paint bucket, 4 color tubes, 1 colour Cup holder with paint tins) -2 knife holder -approx. 10 doctor blades 0, 5 mm / 5 squeegee blade 1 mm / 2 m Blade Knife roll 0, 2 mm -1 intermediate drying -2 light barrier -various sensors

VESPA 30/60/18.5 VGA Cutting mill for plastics 18.5 KW, 200-300 kg/h. Insertion opening mm: 620×400 Rotor diameter mm: 300 Throughput kg/h: 200-300 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Engine KW: 18,5 Dimensions mm: 1210×1000×1925 Weight kg: 1500 options: Material conveying blower 4.0 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with pre ...

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Cutting mill VESPA 18/32/5.5 kW VGA for plastics, cable 5.5 KW, 60-80 kg/h. Model: VESPA18/32/5.5 kW VGA Throughput Kg/h: 60-80 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×160 Stator Knife Quantity/Dimensions Piece x mm: 4×160 Motor kW: 5.5 Weight Kg: 400 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 860 B-620 C-1480 D 1250 E 325 F 220

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. 40/80/30 VGA granulator for plastics 30 KW, 350-600 kg/h. Model: VESPA 40/80/30 kWt VGA Throughput Kg/h: 350-600 Rotor diameter мм: 400 Rotor knife quantity/dimensions piece x mm: 6×400 Stator knife quantity/dimensions piece x mm: 4×400 Motor kW: 30 Weight Kg: 1960 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 1520 B-1430 C-2420 D 1910 E 820 F 500

VESPA 35/50/15 VGA Cutting mill for plastics 15 KW, 150-250 kg/h. Insertion opening mm: 520×380 Rotor diameter mm: 350 Throughput kg/h: 150-250 Rotor blade quantity/mm: 6 x 250 Stator knife quantity/mm: 4 x 250 Motor KW: 15,0 Dimensions mm: 1180x880x1970 Weight kg: 1150 options: With material conveying blower 4.0 kW and big bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self ...

K+G Wetter vacuum Cutmix 120 STL, model VCM 120 ,120 liters vacuum cutter, variable knife sdpeed, 2 bowl speeds, mixing speed forward and reverse, variable bowl speed, unloader manually operated, hydrlauic unloading device, knife cover electrically operated, with cooking facility. Further Information on demand. You are very welcome to test the machine in our facility in Koblenz, Germany.