knife grinder used for sale

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 20 mm -Speed: 2850 rpm -Motor power: 1.1 kW -Operating voltage: 380 volts -Dimensions: 500/560/H1220 mm -Weight: 110 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: approx. 0.9 kW -Speed: approx. 3000 rpm -grinding wheels: max. Ø 160 x 25 mm -Dimensions: 500/300/H1240 mm -Weight: 80 kg

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 200 x 32 mm -Speed: 3000 rpm -Motor power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 570/300/H1150 mm -Weight: 118 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 2.2 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 350 x 50 mm -Operating voltage: 380 volts -Dimensions: 760/490/H1140 mm -Weight: 238 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.85 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 600/420/H1140 mm -Weight: 222 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. Grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.5 kW -Speed: 1430 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 650/500/H1390 mm -Weight: 182 kg

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg

Bench grinder, grinder, stand grinder, stand grinder -Motor power: 0.50 kW -Speed: 3,000 rpm -with: stand -Max. Grinding wheels: Ø 175 x 20 mm -Operating voltage: 380 volts -Dimensions: 500/540/H1870 mm -Weight: 100 kg

The stripping unit model 99913 is a modern system developed by Kuzlitmash. The combination of reliability, strength, and precision makes the 99913 ideal for grinding parts. The processing technology on the 99913 has been tested by operation for many years in the most difficult conditions for cleaning the outer surfaces of iron, steel, and titanium castings.

Cylindrical Grinder GU32x60S Capacity Distance between centers 600 mm Swivel over table Ø320 mm Max. load of centers 100 kg Max. external grinding diameter Ø300 mm Wheel head Swivel angle ±30° Manual distance 160 mm Auto. rapid advance 40 mm Sliding seat supplementary displacement 95 (total 295) mm Min. setting unit (micro-adjust) 0.001 mm One turn of handwheel (graduation) 2 (0.005) mm Grinding wheel O.D. x width x I.D. Ø405 x 50 x Ø127 mm Speed (belt type) 1783 r.p.m. (50 Hz) / 1940 r.p.m. (60 Hz) Work spindle head Swivel angle 120° (+90°, -30°) Center taper MT. 4 Spindle speed (variable) 10~300 r.p.m. Max. load of spindle (tool holder includer) 35 kg (max. length : 150 mm) Tailstock Taper center MT. 4 Stroke 25 mm Table Swivel angle -2° ~ +10° Traverse speed 50 / 5400 mm/min Auto. reciprocate min. stroke 8 mm F ...

Grinding diameter: 630 mm Grinding length: 2000 mm Peak height: 320 mm Table speed - without steps: 0.005-5 m / min Longitudinal table movement min./max.: 5/3350 mm Table speed: 8 m / min Grinding headstock-cross movement: 420 mm Workpiece headstock motor: 3,0 kW Grinding headstock-motor power: 22 kW Motor of the internal grinding device: 3 kW Lubricating pump motor: 0,11 kW Machine weight approx.: 15700 kg Space requirement approx.: H1970 / B3100 / L12650 mm

Haarslev Grinder 400 mm, no loader, 414 volt, 90 kw, in good working condition

Electrode grinder, TIG welder, grinder, tungsten electrode grinder -Manufacturer: Cronitex, electrode grinder with suction system and accessories -Type: WIG-Spitz -Motor: 220V / 0.18 kW / 2900 rpm -Grinding discs: Ø max. 150 mm -Extractor system: in a sturdy base cabinet -Accessories: included, see photos -Dimension: 550/250/H1300 mm -Weight: 76 kg

Rod grinder, straight grinder, straight grinder VEM, GALVANOTECHNIK LEIPZIG DHS disc diameter: max. 160 mm disc width: max. 30 mm motor: 220 / 380 V 3AC, 50 Hz approx. 4.0 m connection cable used, tested ! Dimensions: 580 x 175 x 140 mm

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4280 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5680 € : 117.58 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3660 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6910 € : 143.04 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...

Used vending machine grinder SEYDELMANN - With loading for 200 litre boiler - Feed auger - various wolf discs - incl. approx. 30 different knives - Processing of mass up to a temperature of 0°C possible without any problems - not suitable for frozen meat - Maximum capacity of 170 kg Viewing and test run are possible by arrangement.

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Knuth, double bench grinder type DSB200D -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 2950 rpm -Operating voltage: 220/380 volts -Dimensions: 500/300/H1100 mm -Weight: 43 kg

Combination with the Grieffe Intermac Combi Table 100E (no. 23063) - Serial Number: 80029 Weight: +/- 5 tons Power: 18 kW Air pressure: 7-8 Bar Waterpressure: 1,5 bar Length mm: 5700 Width mm: 2600 Height mm: 2300 Working height: 84 cm Transport size L x W x H: 6,0 x 2,45 x 2,3 Min.-max glass size: 1760 x 3000 in mm Condition machine : Disassembled in working order Control type: CNC Electric. Connection: 63A 3P+N+PE Remaining: incl. tools Video available - for more information, please send a mail: salestecfort.nl

Code: 0198 Brand: MABO - ITALY Model: DELTA - CE Standard Belt sanding machine with double goose neck for wood, metal, aluminium, composite materials - CE Standard Table length mm 3000 Table width mm 800 Automatic table lifting - Vertical stroke mm 550 Motor 2 speeds rpm 1400/2800 - Hp 3/4 Pulley diameter mm 200 Suction motor Hp 0,5 Emergency rope Suction mouth diameter mm 120 Overall dimensions mm 4400 x 1100 x 1550 h Weight kg 420

Telescopic covers for X and Z axes for many Studer CNC grinding machines S21, S31, S33, S40 etc. And for many other machine manufacturers on request.

Sell a Hilti DAG 230-D. Sold incl. the diamond disc. The machine is in good condition, functional and tested.

PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE

Thread Grinding Machine, Press Roller Grinding Machine OSTERWALDER RECTIMAT PR120 Grinding Length: 150 mm Grinding Wheel Diameter: 280 - 350 mm Wheel Width: 20 mm Workpiece Diameter: 65 - 120 mm Workpiece Speed: 1, 5 - 20 rpm 380 V used, tested ! Dimensions: 1500 x 1200 x 1600 mm

Stainless Steel Polishing Body Satellite for High Gloss Compacting Satellite-shaped polishing body made of stainless steel for use in polishing drums or vibrators for polishing, deburring, High-gloss compaction. Can be used for all ferrous and non-ferrous metals in vibrators, centrifugal grinders and bells or drums. The polished steel bodies are made of stainless steel. Diameter: approx. 5.22 mm Height: approx. 3.5 mm Approx. 400 kg available

Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm counters of axes are damaged ? manufacturer don?t supply spare parts Control:SIEMENS 840 C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Made in Germany

Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm grinding flange included Made in Germany Control:SIEMENS 840C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm

Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Size of magnet: 600x250mm Dimension of grinding wheel: ?300 x 30mm Made in Germany Control:LENZE

Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 400 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm Spindle cooling Made in Germany

Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 300 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm Made in Germany

Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 400 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm grinding flange included, conture

Control:Fanuc 160 i - M axis travel range X 650 mm Y 300 mm Z 300 mm C +150?/-60? taper ISO50 dimension grinding wheel 250mm speed of grinding spindle ? 9000 rpm grinding flange included, machine has spindle cooling, dust extraction. made in Schwi

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland

Die grinder FLEX H 1206 ( H1206 ) 1,0 KW 5700 rpm 230 V 1AC 50 Hz grinding wheel diameter: max. 150 mm grinding wheel width: max. 30 mm tool holder: Ø 20 mm approx. 3.0 m Connection cable used, tested ! Dimensions ( without cable ): 600 x 170 x 170 mm

ROTOFINISH ST 11T -Built in 1989 -Control Dimensions: Ywexjrhe LxWxH 1.5x.5x1.5 meters / Weight 650 kg

Rod grinder, high-frequency tool, high-frequency machines BOSCH 0 602 204 001 0,16 / 0.2 KW 900 / 12000 rpm 200 / 265 V 3AC 150 / 200 Hz Tool holder: Ø 8 mm Abrasive media diameter: max. Ø 40 mm approx. 3.5 m Connection cable used, checked! Dimensions ( without cable ): 250 x 160 x 65 mm

rod grinder, high-frequency tool, high-frequency machines BOSCH 0 602 204 001 0,16 / 0.2 KW 900 / 12000 rpm 200 / 265 V 3AC 150 / 200 Hz Tool holder: Ø 6 mm Abrasive media diameter: max. Ø 40 mm approx. 3.5 m Connection cable used, checked! Dimensions ( without cable ): 250 x 160 x 65 mm

Angle Grinders, Compact Angle Grinders, Small Voltage Tools FINE MSf 78 ck 1,5 KW 6300 rpm 42 V 1AC 50 Hz Grinding wheel diameter: Ø 230 mm inner diameter: Ø 22.2 mm spindle thread: M14 x 2.0 used, tested, Image similar ! Dimensions ( without cable ): 500 x 310 x 150 mm

Angle Grinders, Long Neck Angle Grinders, Compact Angle Grinders, Low Voltage Tools FEIN MSfv 749 0,75 KW 12000 rpm 42 V 1AC 50 Hz Grinding wheel diameter: Ø 125 mm inner diameter: Ø 22.2 mm spindle thread: M14 x 2.0 used, tested, picture similar Dimensions ( without cable ): 565 x 135 x 100 mm

Angle Grinder, Long Neck Angle Grinder, Compact Angle Grinder, Low Voltage Tool FEIN MSfv 649 0,75 KW 12000 rpm 220 V 1AC 50 Hz Grinding wheel diameter: Ø 125 mm inner diameter: Ø 22.2 mm spindle thread: M14 x 2.0 used, tested, picture similar !' Dimensions (without cable): 565 x 135 x 100 mm

Straight grinder, hand grinder, extra-low voltage tool FEIN AHS1 736c 0.28 KW 4500 rpm 42 V 1AC 50 Hz drill chuck: max. Ø 10 mm used, tested, picture similar !; dimensions (without cable): 310 x 65 x 75 mm

Angle grinders AEG WSBA 1801 ( WSBA 801 ) 1,8 KW 6600 rpm 220 V 1AC 50 Hz grinding wheel diameter: max. 230 mm approx. 3.5 m Connection cable used, tested ! Dimensions (without cable): 470 x 320 x 150 mm