kneading machines used for sale

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.

Bag inserts from Bosch Manufacturer: Bosch type: GSH 5031 B Year of manufacture 2002 With the Bosch GSH 5031 B, they get a machine that creates a vertical or horizontal pillow packs in cartons. Maximum speed: 180 bags / min 10 cartons / min Bag dimensions (mm) minimum (length x width): 100 x 70 maximum (length x width): 400 x 250 maximum height (thickness): 80 Carton dimensions (mm) (open) minimum (length x width x height): 180 x 70 x 60 maximum (length x width x height): 500 x 350 x 450 If you have questions you can me any time call on mobile: 01718367957

Bag inserts from Bosch Manufacturer: Bosch type: GSH 5031 B Year of manufacture 2002 With the Bosch GSH 5031 B, they get a machine that creates a vertical or horizontal pillow packs in cartons. Maximum speed: 180 bags / min 10 cartons / min Bag dimensions (mm) minimum (length x width): 100 x 70 maximum (length x width): 400 x 250 maximum height (thickness): 80 Carton dimensions (mm) (open) minimum (length x width x height): 180 x 70 x 60 maximum (length x width x height): 500 x 350 x 450 If you have questions you can me any time call on mobile: 01718367957

Used, in very good maintenance condition: complete frick/York freeze pump system for industrial use, consisting of the following main components: Frick/York XJS 120S, lifting volume 415 m3/h, screw compressor unit, designed with oil separator, thermosiphon oil cooler, electric motor Leroy Somer 90 kW.The specified cooling capacity of 74 kW is achieved with refrigerant R717 at -40 C/+35 C. 4 identical units available

Frey F-Line F50 vacuum stuffer, vacuum filling machine for filling, portioning, linking, CAN control, filling capacity up to 2.200 kg/h, filling pressure up to 30 bar. You are very welcome to test the machine in our facility in Koblenz, Germany.

Capacity 85 beats / min.

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!

Key data: 1000 , 600 , 400

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up

Handtmann hanging line consits of Handtmann VF 100 and PLH 216, vacuum filling machine Handtmann VF 100, vacuum stuffer for filling, portioning, linking, case holding device, PCK control, with loading device, filling performance (variable adjustable) max. 3000 kg/h, filling pressure max. 55 bar, with Handtmann PLH 216 hanging machin.

Pallet stretch-wrapper PIERI Speed 100 pallets/h Control SIEMENS S 7

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

Ziehm Vision RFD 3D is the world's only 3D C-arm with flat-panel technology that provides a 16 cm edge length per scan volume combines 2D and 3D functionality to offer maximum intraoperative control. THE ULTIMATE C-ARM TO OUTPERFORM The treatment of cardiovascular and degenerative musculoskeletal conditions calls for high-performance intraoperative imaging technologies. Incorporating the latest CMOS technology for excellent image quality, the Ziehm Vision RFD is the ideal product. In addition to the cardiovascular-focused 20.5 cm x 20.5 cm flat-panel version, the Ziehm Vision RFD is available with a 31 cm x 31 cm CMOS flat-panel detector. This is the preferred model for highly demanding orthopedic, trauma or cardiovascular interventions that require more information in one image. Both systems are equipped with a powerful generator for optimum penetration, Advanced Active Cooling to e ...

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...

Maja SA 85 S compact flake ice machine, ice output 85 kg / 24 h, with integrated condensing unit. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system

Model: KRONES Solomatic Type: K018-xx1 model: 1200-25-480-6-5-160 Year of construction: 2003 Capacity: 36,000 to 40,000 fl./h Running direction: Left machine Feeding: Linear, straight Unit: fuselage PWL300, back PWL300 Glue roller: Steel glue roller Guide: 1x inlet star, 1x outlet star Label-L=: min. 40mm, max. 160mm Bottle-D=: min. 50mm, max. 125mm Voltage: 220/380 V Tags: Torso, Chest, Back Machine dimensions : 2.80 x 2.85 meters. The dimensions refer to the base frame without procors of the units and spout extension, as well as electrical cabinet (80x40x240cm). Price ex location: "As Is" Condition please inquire Price ex location: in refurbished condition on request.

Maja SA 70 fragments of ice maker, ice power approx. 70 kg / 24 h, water consumption approx. 0, 07 m³ / 24 h, refrigerant R 404A. The machine can be visited like to 56070 Koblenz, and tested.